The implementation of image analysis for the visualization of adhesion assessment of a composite film
Samo za registrovane korisnike
2018
Autori
Algellai, Ahmed A.Vuksanović, Marija M.
Tomić, Nataša Z.
Marinković, Aleksandar D.
Obradović-Đuričić, Kosovka
Radojević, Vesna J.
Jančić-Heinemann, Radmila M.
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
The objective of this study is to investigate quantitative assessment of the adhesion behavior of composite films onto a metallic surface. The composite films had UV cured Bis-GMA (Bisphenol A glycidylmethacrylate)/TEGDMA (triethylene glycol dimethacrylate) as matrix and ferrous oxide doped alumina (Al2O3 Fe) particles with two surface modifications, (3-methacryloxypropyltrimethoxysilane) (MEMO) and the vinyltris(2-methoxyethoxy) silane (VTMOEO), as reinforcement. Composites were made with 0.5, 1.5 and 3 wt% of alumina particles. Adhesion was evaluated using the micro hardness testing method. The contact angle was measured and compared to the adhesive parameter from micro hardness measurements. The form of the indent on the surface of the composite film was analyzed in order to correlate the indent morphology to the adhesion quality.
Ključne reči:
Adhesion / Composite materials / Indentation and hardness / FTIR / Electron microscopyIzvor:
Materials Letters, 2018, 227, 25-28Izdavač:
- Elsevier Science Bv, Amsterdam
Finansiranje / projekti:
- Razvoj opreme i procesa dobijanja polimernih kompozitnih materijala sa unapred definisanim funkcionalnim svojstvima (RS-MESTD-Technological Development (TD or TR)-34011)
DOI: 10.1016/j.matlet.2018.04.118
ISSN: 0167-577X
WoS: 000436420200007
Scopus: 2-s2.0-85046804016
Kolekcije
Institucija/grupa
Stomatološki fakultetTY - JOUR AU - Algellai, Ahmed A. AU - Vuksanović, Marija M. AU - Tomić, Nataša Z. AU - Marinković, Aleksandar D. AU - Obradović-Đuričić, Kosovka AU - Radojević, Vesna J. AU - Jančić-Heinemann, Radmila M. PY - 2018 UR - https://smile.stomf.bg.ac.rs/handle/123456789/2297 AB - The objective of this study is to investigate quantitative assessment of the adhesion behavior of composite films onto a metallic surface. The composite films had UV cured Bis-GMA (Bisphenol A glycidylmethacrylate)/TEGDMA (triethylene glycol dimethacrylate) as matrix and ferrous oxide doped alumina (Al2O3 Fe) particles with two surface modifications, (3-methacryloxypropyltrimethoxysilane) (MEMO) and the vinyltris(2-methoxyethoxy) silane (VTMOEO), as reinforcement. Composites were made with 0.5, 1.5 and 3 wt% of alumina particles. Adhesion was evaluated using the micro hardness testing method. The contact angle was measured and compared to the adhesive parameter from micro hardness measurements. The form of the indent on the surface of the composite film was analyzed in order to correlate the indent morphology to the adhesion quality. PB - Elsevier Science Bv, Amsterdam T2 - Materials Letters T1 - The implementation of image analysis for the visualization of adhesion assessment of a composite film VL - 227 SP - 25 EP - 28 DO - 10.1016/j.matlet.2018.04.118 ER -
@article{ author = "Algellai, Ahmed A. and Vuksanović, Marija M. and Tomić, Nataša Z. and Marinković, Aleksandar D. and Obradović-Đuričić, Kosovka and Radojević, Vesna J. and Jančić-Heinemann, Radmila M.", year = "2018", abstract = "The objective of this study is to investigate quantitative assessment of the adhesion behavior of composite films onto a metallic surface. The composite films had UV cured Bis-GMA (Bisphenol A glycidylmethacrylate)/TEGDMA (triethylene glycol dimethacrylate) as matrix and ferrous oxide doped alumina (Al2O3 Fe) particles with two surface modifications, (3-methacryloxypropyltrimethoxysilane) (MEMO) and the vinyltris(2-methoxyethoxy) silane (VTMOEO), as reinforcement. Composites were made with 0.5, 1.5 and 3 wt% of alumina particles. Adhesion was evaluated using the micro hardness testing method. The contact angle was measured and compared to the adhesive parameter from micro hardness measurements. The form of the indent on the surface of the composite film was analyzed in order to correlate the indent morphology to the adhesion quality.", publisher = "Elsevier Science Bv, Amsterdam", journal = "Materials Letters", title = "The implementation of image analysis for the visualization of adhesion assessment of a composite film", volume = "227", pages = "25-28", doi = "10.1016/j.matlet.2018.04.118" }
Algellai, A. A., Vuksanović, M. M., Tomić, N. Z., Marinković, A. D., Obradović-Đuričić, K., Radojević, V. J.,& Jančić-Heinemann, R. M.. (2018). The implementation of image analysis for the visualization of adhesion assessment of a composite film. in Materials Letters Elsevier Science Bv, Amsterdam., 227, 25-28. https://doi.org/10.1016/j.matlet.2018.04.118
Algellai AA, Vuksanović MM, Tomić NZ, Marinković AD, Obradović-Đuričić K, Radojević VJ, Jančić-Heinemann RM. The implementation of image analysis for the visualization of adhesion assessment of a composite film. in Materials Letters. 2018;227:25-28. doi:10.1016/j.matlet.2018.04.118 .
Algellai, Ahmed A., Vuksanović, Marija M., Tomić, Nataša Z., Marinković, Aleksandar D., Obradović-Đuričić, Kosovka, Radojević, Vesna J., Jančić-Heinemann, Radmila M., "The implementation of image analysis for the visualization of adhesion assessment of a composite film" in Materials Letters, 227 (2018):25-28, https://doi.org/10.1016/j.matlet.2018.04.118 . .