Saveljić, Igor

Link to this page

Authority KeyName Variants
561da6fe-d81f-472d-9931-367468a58c65
  • Saveljić, Igor (5)
Projects

Author's Bibliography

Trauma of the Frontal Region Is Influenced by the Volume of Frontal Sinuses. A Finite Element Study

Pajić, Srbislav; Antić, Svetlana; Vukicević, Arso M.; Đorđević, Nenad; Jovicić, Gordana; Savić, Živorad; Saveljić, Igor; Janović, Aleksa; Pešić, Zoran; Đurić, Marija; Filipović, Nenad

(Frontiers Media Sa, Lausanne, 2017)

TY  - JOUR
AU  - Pajić, Srbislav
AU  - Antić, Svetlana
AU  - Vukicević, Arso M.
AU  - Đorđević, Nenad
AU  - Jovicić, Gordana
AU  - Savić, Živorad
AU  - Saveljić, Igor
AU  - Janović, Aleksa
AU  - Pešić, Zoran
AU  - Đurić, Marija
AU  - Filipović, Nenad
PY  - 2017
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/2215
AB  - Anatomy of frontal sinuses varies individually, from differences in volume and shape to a rare case when the sinuses are absent. However, there are scarce data related to influence of these variations on impact generated fracture pattern. Therefore, the aim of this study was to analyse the influence of frontal sinus volume on the stress distribution and fracture pattern in the frontal region. The study included four representative Finite Element models of the skull. Reference model was built on the basis of computed tomography scans of a human head with normally developed frontal sinuses. By modifying the reference model, three additional models were generated: a model without sinuses, with hypoplasic, and with hyperplasic sinuses. A 7.7 kN force was applied perpendicularly to the forehead of each model, in order to simulate a frontal impact. The results demonstrated that the distribution of impact stress in frontal region depends on the frontal sinus volume. The anterior sinus wall showed the highest fragility in case with hyperplasic sinuses, whereas posterior wall/inner plate showed more fragility in cases with hypoplasic and undeveloped sinuses. Well-developed frontal sinusesmight, through absorption of the impact energy by anterior wall, protect the posterior wall and intracranial contents.
PB  - Frontiers Media Sa, Lausanne
T2  - Frontiers in Physiology
T1  - Trauma of the Frontal Region Is Influenced by the Volume of Frontal Sinuses. A Finite Element Study
VL  - 8
DO  - 10.3389/fphys.2017.00493
ER  - 
@article{
author = "Pajić, Srbislav and Antić, Svetlana and Vukicević, Arso M. and Đorđević, Nenad and Jovicić, Gordana and Savić, Živorad and Saveljić, Igor and Janović, Aleksa and Pešić, Zoran and Đurić, Marija and Filipović, Nenad",
year = "2017",
abstract = "Anatomy of frontal sinuses varies individually, from differences in volume and shape to a rare case when the sinuses are absent. However, there are scarce data related to influence of these variations on impact generated fracture pattern. Therefore, the aim of this study was to analyse the influence of frontal sinus volume on the stress distribution and fracture pattern in the frontal region. The study included four representative Finite Element models of the skull. Reference model was built on the basis of computed tomography scans of a human head with normally developed frontal sinuses. By modifying the reference model, three additional models were generated: a model without sinuses, with hypoplasic, and with hyperplasic sinuses. A 7.7 kN force was applied perpendicularly to the forehead of each model, in order to simulate a frontal impact. The results demonstrated that the distribution of impact stress in frontal region depends on the frontal sinus volume. The anterior sinus wall showed the highest fragility in case with hyperplasic sinuses, whereas posterior wall/inner plate showed more fragility in cases with hypoplasic and undeveloped sinuses. Well-developed frontal sinusesmight, through absorption of the impact energy by anterior wall, protect the posterior wall and intracranial contents.",
publisher = "Frontiers Media Sa, Lausanne",
journal = "Frontiers in Physiology",
title = "Trauma of the Frontal Region Is Influenced by the Volume of Frontal Sinuses. A Finite Element Study",
volume = "8",
doi = "10.3389/fphys.2017.00493"
}
Pajić, S., Antić, S., Vukicević, A. M., Đorđević, N., Jovicić, G., Savić, Ž., Saveljić, I., Janović, A., Pešić, Z., Đurić, M.,& Filipović, N.. (2017). Trauma of the Frontal Region Is Influenced by the Volume of Frontal Sinuses. A Finite Element Study. in Frontiers in Physiology
Frontiers Media Sa, Lausanne., 8.
https://doi.org/10.3389/fphys.2017.00493
Pajić S, Antić S, Vukicević AM, Đorđević N, Jovicić G, Savić Ž, Saveljić I, Janović A, Pešić Z, Đurić M, Filipović N. Trauma of the Frontal Region Is Influenced by the Volume of Frontal Sinuses. A Finite Element Study. in Frontiers in Physiology. 2017;8.
doi:10.3389/fphys.2017.00493 .
Pajić, Srbislav, Antić, Svetlana, Vukicević, Arso M., Đorđević, Nenad, Jovicić, Gordana, Savić, Živorad, Saveljić, Igor, Janović, Aleksa, Pešić, Zoran, Đurić, Marija, Filipović, Nenad, "Trauma of the Frontal Region Is Influenced by the Volume of Frontal Sinuses. A Finite Element Study" in Frontiers in Physiology, 8 (2017),
https://doi.org/10.3389/fphys.2017.00493 . .
2
16
8
13

Does the presence of an unerupted lower third molar influence the risk of mandibular angle and condylar fractures?

Antić, Svetlana; Saveljić, Igor; Nikolić, D.; Jovicić, G.; Filipović, N.; Rakočević, Zoran; Đurić, M.

(Churchill Livingstone, Edinburgh, 2016)

TY  - JOUR
AU  - Antić, Svetlana
AU  - Saveljić, Igor
AU  - Nikolić, D.
AU  - Jovicić, G.
AU  - Filipović, N.
AU  - Rakočević, Zoran
AU  - Đurić, M.
PY  - 2016
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/2167
AB  - It has been suggested that unerupted lower third molars (M3) increase the fragility of the mandibular angle and simultaneously decrease the risk of condylar fracture. However, it is unknown whether this applies regardless of the direction and point of impact of the traumatic force. The aim of this study was to investigate the impact of an unerupted M3 on the fragility of the angle and condyle in terms of a force acting from different directions and affecting different regions of the mandible. Computed tomography scans of a human mandible and finite element methodology were used to obtain two three-dimensional models: a model with, and the other without an unerupted M3. A force of 2000 N was applied to three different regions of the models: the symphysis, ipsilateral body, and contralateral body, respectively. When the force was applied to the mandibular body, the results revealed increased angle fragility in cases with unerupted M3. When the force was applied to the symphysis, the condyle region showed higher fragility, irrespective of the presence of an unerupted M3. In summary, fragility of the angle and condyle regions depends on the presence of an unerupted M3 and on the direction and point of impact of the force.
PB  - Churchill Livingstone, Edinburgh
T2  - International Journal of Oral & Maxillofacial Surgery
T1  - Does the presence of an unerupted lower third molar influence the risk of mandibular angle and condylar fractures?
VL  - 45
IS  - 5
SP  - 588
EP  - 592
DO  - 10.1016/j.ijom.2014.09.018
ER  - 
@article{
author = "Antić, Svetlana and Saveljić, Igor and Nikolić, D. and Jovicić, G. and Filipović, N. and Rakočević, Zoran and Đurić, M.",
year = "2016",
abstract = "It has been suggested that unerupted lower third molars (M3) increase the fragility of the mandibular angle and simultaneously decrease the risk of condylar fracture. However, it is unknown whether this applies regardless of the direction and point of impact of the traumatic force. The aim of this study was to investigate the impact of an unerupted M3 on the fragility of the angle and condyle in terms of a force acting from different directions and affecting different regions of the mandible. Computed tomography scans of a human mandible and finite element methodology were used to obtain two three-dimensional models: a model with, and the other without an unerupted M3. A force of 2000 N was applied to three different regions of the models: the symphysis, ipsilateral body, and contralateral body, respectively. When the force was applied to the mandibular body, the results revealed increased angle fragility in cases with unerupted M3. When the force was applied to the symphysis, the condyle region showed higher fragility, irrespective of the presence of an unerupted M3. In summary, fragility of the angle and condyle regions depends on the presence of an unerupted M3 and on the direction and point of impact of the force.",
publisher = "Churchill Livingstone, Edinburgh",
journal = "International Journal of Oral & Maxillofacial Surgery",
title = "Does the presence of an unerupted lower third molar influence the risk of mandibular angle and condylar fractures?",
volume = "45",
number = "5",
pages = "588-592",
doi = "10.1016/j.ijom.2014.09.018"
}
Antić, S., Saveljić, I., Nikolić, D., Jovicić, G., Filipović, N., Rakočević, Z.,& Đurić, M.. (2016). Does the presence of an unerupted lower third molar influence the risk of mandibular angle and condylar fractures?. in International Journal of Oral & Maxillofacial Surgery
Churchill Livingstone, Edinburgh., 45(5), 588-592.
https://doi.org/10.1016/j.ijom.2014.09.018
Antić S, Saveljić I, Nikolić D, Jovicić G, Filipović N, Rakočević Z, Đurić M. Does the presence of an unerupted lower third molar influence the risk of mandibular angle and condylar fractures?. in International Journal of Oral & Maxillofacial Surgery. 2016;45(5):588-592.
doi:10.1016/j.ijom.2014.09.018 .
Antić, Svetlana, Saveljić, Igor, Nikolić, D., Jovicić, G., Filipović, N., Rakočević, Zoran, Đurić, M., "Does the presence of an unerupted lower third molar influence the risk of mandibular angle and condylar fractures?" in International Journal of Oral & Maxillofacial Surgery, 45, no. 5 (2016):588-592,
https://doi.org/10.1016/j.ijom.2014.09.018 . .
18
11
22

Occlusal load distribution through the cortical and trabecular bone of the human mid-facial skeleton in natural dentition: A three-dimensional finite element study

Janović, Aleksa; Saveljić, Igor; Vukicević, Arso M.; Nikolić, Dalibor; Rakočević, Zoran; Jovicić, Gordana; Filipović, Nenad; Đurić, Marija

(Elsevier Gmbh, Munich, 2015)

TY  - JOUR
AU  - Janović, Aleksa
AU  - Saveljić, Igor
AU  - Vukicević, Arso M.
AU  - Nikolić, Dalibor
AU  - Rakočević, Zoran
AU  - Jovicić, Gordana
AU  - Filipović, Nenad
AU  - Đurić, Marija
PY  - 2015
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/2050
AB  - Understanding of the occlusal load distribution through the mid-facial skeleton in natural dentition is essential because alterations in magnitude and/or direction of occlusal forces may cause remarkable changes in cortical and trabecular bone structure. Previous analyses by strain gauge technique, photoelastic and, more recently, finite element (FE) methods provided no direct evidence for occlusal load distribution through the cortical and trabecular bone compartments individually. Therefore, we developed an improved three-dimensional FE model of the human skull in order to clarify the distribution of occlusal forces through the cortical and trabecular bone during habitual masticatory activities. Particular focus was placed on the load transfer through the anterior and posterior maxilla. The results were presented in von Mises stress (VMS) and the maximum principal stress, and compared to the reported FE and strain gauge data. Our qualitative stress analysis indicates that occlusal forces distribute through the mid-facial skeleton along five vertical and two horizontal buttresses. We demonstrated that cortical bone has a priority in the transfer of occlusal load in the anterior maxilla, whereas both cortical and trabecular bone in the posterior maxilla are equally involved in performing this task Observed site dependence of the occlusal load distribution may help clinicians in creating strategies for implantology and orthodontic treatments. Additionally, the magnitude of VMS in our model was significantly lower in comparison to previous FE models composed only of cortical bone. This finding suggests that both cortical and trabecular bone should be modeled whenever stress will be quantitatively analyzed.
PB  - Elsevier Gmbh, Munich
T2  - Annals of Anatomy - Anatomischer Anzeiger
T1  - Occlusal load distribution through the cortical and trabecular bone of the human mid-facial skeleton in natural dentition: A three-dimensional finite element study
VL  - 197
SP  - 16
EP  - 23
DO  - 10.1016/j.aanat.2014.09.002
ER  - 
@article{
author = "Janović, Aleksa and Saveljić, Igor and Vukicević, Arso M. and Nikolić, Dalibor and Rakočević, Zoran and Jovicić, Gordana and Filipović, Nenad and Đurić, Marija",
year = "2015",
abstract = "Understanding of the occlusal load distribution through the mid-facial skeleton in natural dentition is essential because alterations in magnitude and/or direction of occlusal forces may cause remarkable changes in cortical and trabecular bone structure. Previous analyses by strain gauge technique, photoelastic and, more recently, finite element (FE) methods provided no direct evidence for occlusal load distribution through the cortical and trabecular bone compartments individually. Therefore, we developed an improved three-dimensional FE model of the human skull in order to clarify the distribution of occlusal forces through the cortical and trabecular bone during habitual masticatory activities. Particular focus was placed on the load transfer through the anterior and posterior maxilla. The results were presented in von Mises stress (VMS) and the maximum principal stress, and compared to the reported FE and strain gauge data. Our qualitative stress analysis indicates that occlusal forces distribute through the mid-facial skeleton along five vertical and two horizontal buttresses. We demonstrated that cortical bone has a priority in the transfer of occlusal load in the anterior maxilla, whereas both cortical and trabecular bone in the posterior maxilla are equally involved in performing this task Observed site dependence of the occlusal load distribution may help clinicians in creating strategies for implantology and orthodontic treatments. Additionally, the magnitude of VMS in our model was significantly lower in comparison to previous FE models composed only of cortical bone. This finding suggests that both cortical and trabecular bone should be modeled whenever stress will be quantitatively analyzed.",
publisher = "Elsevier Gmbh, Munich",
journal = "Annals of Anatomy - Anatomischer Anzeiger",
title = "Occlusal load distribution through the cortical and trabecular bone of the human mid-facial skeleton in natural dentition: A three-dimensional finite element study",
volume = "197",
pages = "16-23",
doi = "10.1016/j.aanat.2014.09.002"
}
Janović, A., Saveljić, I., Vukicević, A. M., Nikolić, D., Rakočević, Z., Jovicić, G., Filipović, N.,& Đurić, M.. (2015). Occlusal load distribution through the cortical and trabecular bone of the human mid-facial skeleton in natural dentition: A three-dimensional finite element study. in Annals of Anatomy - Anatomischer Anzeiger
Elsevier Gmbh, Munich., 197, 16-23.
https://doi.org/10.1016/j.aanat.2014.09.002
Janović A, Saveljić I, Vukicević AM, Nikolić D, Rakočević Z, Jovicić G, Filipović N, Đurić M. Occlusal load distribution through the cortical and trabecular bone of the human mid-facial skeleton in natural dentition: A three-dimensional finite element study. in Annals of Anatomy - Anatomischer Anzeiger. 2015;197:16-23.
doi:10.1016/j.aanat.2014.09.002 .
Janović, Aleksa, Saveljić, Igor, Vukicević, Arso M., Nikolić, Dalibor, Rakočević, Zoran, Jovicić, Gordana, Filipović, Nenad, Đurić, Marija, "Occlusal load distribution through the cortical and trabecular bone of the human mid-facial skeleton in natural dentition: A three-dimensional finite element study" in Annals of Anatomy - Anatomischer Anzeiger, 197 (2015):16-23,
https://doi.org/10.1016/j.aanat.2014.09.002 . .
31
18
30

Impact of the lower third molar presence and position on the fragility of mandibular angle and condyle: A Three-dimensional finite element study

Antić, Svetlana; Vukicević, Arso M.; Milasinović, Marko; Saveljić, Igor; Jovicić, Gordana; Filipović, Nenad; Rakočević, Zoran; Đurić, Marija

(Churchill Livingstone, Edinburgh, 2015)

TY  - JOUR
AU  - Antić, Svetlana
AU  - Vukicević, Arso M.
AU  - Milasinović, Marko
AU  - Saveljić, Igor
AU  - Jovicić, Gordana
AU  - Filipović, Nenad
AU  - Rakočević, Zoran
AU  - Đurić, Marija
PY  - 2015
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1971
AB  - The aim of the present study was to investigate the influences of the presence and position of a lower third molar (M3) on the fragility of mandibular angle and condyle, using finite element analysis. From computed tomographic scans of a human mandible with normally erupted M3, two additional virtual models were generated: a mandibular model with partially impacted M3 and a model without M3. Two cases of impact were considered: a frontal and a lateral blow. The results are based on the chromatic analysis of the distributed von Mises and principal stresses, and calculation of their failure indices. In the frontal blow, the angle region showed the highest stress in the case with partially impacted M3, and the condylar region in the case without M3. Compressive stresses were dominant but caused no failure. Tensile stresses were recorded in the retromolar areas, but caused failure only in the case with partially impacted M3. In the lateral blow, the stress concentrated at the point of impact, in the ipsilateral and contralateral angle and condylar regions. The highest stresses were recorded in the case with partially impacted M3. Tensile stresses caused the failure on the ipsilateral side, whereas compressive stresses on the contralateral side.
PB  - Churchill Livingstone, Edinburgh
T2  - Journal of Cranio-Maxillofacial Surgery
T1  - Impact of the lower third molar presence and position on the fragility of mandibular angle and condyle: A Three-dimensional finite element study
VL  - 43
IS  - 6
SP  - 870
EP  - 878
DO  - 10.1016/j.jcms.2015.03.025
ER  - 
@article{
author = "Antić, Svetlana and Vukicević, Arso M. and Milasinović, Marko and Saveljić, Igor and Jovicić, Gordana and Filipović, Nenad and Rakočević, Zoran and Đurić, Marija",
year = "2015",
abstract = "The aim of the present study was to investigate the influences of the presence and position of a lower third molar (M3) on the fragility of mandibular angle and condyle, using finite element analysis. From computed tomographic scans of a human mandible with normally erupted M3, two additional virtual models were generated: a mandibular model with partially impacted M3 and a model without M3. Two cases of impact were considered: a frontal and a lateral blow. The results are based on the chromatic analysis of the distributed von Mises and principal stresses, and calculation of their failure indices. In the frontal blow, the angle region showed the highest stress in the case with partially impacted M3, and the condylar region in the case without M3. Compressive stresses were dominant but caused no failure. Tensile stresses were recorded in the retromolar areas, but caused failure only in the case with partially impacted M3. In the lateral blow, the stress concentrated at the point of impact, in the ipsilateral and contralateral angle and condylar regions. The highest stresses were recorded in the case with partially impacted M3. Tensile stresses caused the failure on the ipsilateral side, whereas compressive stresses on the contralateral side.",
publisher = "Churchill Livingstone, Edinburgh",
journal = "Journal of Cranio-Maxillofacial Surgery",
title = "Impact of the lower third molar presence and position on the fragility of mandibular angle and condyle: A Three-dimensional finite element study",
volume = "43",
number = "6",
pages = "870-878",
doi = "10.1016/j.jcms.2015.03.025"
}
Antić, S., Vukicević, A. M., Milasinović, M., Saveljić, I., Jovicić, G., Filipović, N., Rakočević, Z.,& Đurić, M.. (2015). Impact of the lower third molar presence and position on the fragility of mandibular angle and condyle: A Three-dimensional finite element study. in Journal of Cranio-Maxillofacial Surgery
Churchill Livingstone, Edinburgh., 43(6), 870-878.
https://doi.org/10.1016/j.jcms.2015.03.025
Antić S, Vukicević AM, Milasinović M, Saveljić I, Jovicić G, Filipović N, Rakočević Z, Đurić M. Impact of the lower third molar presence and position on the fragility of mandibular angle and condyle: A Three-dimensional finite element study. in Journal of Cranio-Maxillofacial Surgery. 2015;43(6):870-878.
doi:10.1016/j.jcms.2015.03.025 .
Antić, Svetlana, Vukicević, Arso M., Milasinović, Marko, Saveljić, Igor, Jovicić, Gordana, Filipović, Nenad, Rakočević, Zoran, Đurić, Marija, "Impact of the lower third molar presence and position on the fragility of mandibular angle and condyle: A Three-dimensional finite element study" in Journal of Cranio-Maxillofacial Surgery, 43, no. 6 (2015):870-878,
https://doi.org/10.1016/j.jcms.2015.03.025 . .
44
24
39

Microstructural properties of the mid-facial bones in relation to the distribution of occlusal loading

Janović, Aleksa; Milovanović, Petar; Saveljić, Igor; Nikolić, Dalibor; Hahn, Michael; Rakočević, Zoran; Filipović, Nenad; Amling, Michael; Busse, Bjoern; Đurić, Marija

(Elsevier Science Inc, New York, 2014)

TY  - JOUR
AU  - Janović, Aleksa
AU  - Milovanović, Petar
AU  - Saveljić, Igor
AU  - Nikolić, Dalibor
AU  - Hahn, Michael
AU  - Rakočević, Zoran
AU  - Filipović, Nenad
AU  - Amling, Michael
AU  - Busse, Bjoern
AU  - Đurić, Marija
PY  - 2014
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1881
AB  - Although the concept of the occlusal load transfer through the facial skeleton along the buttresses has been extensively studied, there has been no study to link microarchitecture of the mid-facial bones to the occlusal load distribution. The aim of this study was to analyze micro-structural properties of the mid-facial bones in relation to occlusal stress. The study was performed by combining the three-dimensional finite element analysis (3D FEA) and micro-computed tomography analysis (micro-CT). Clenching was simulated on the computer model of the adult male human skull which was also used as a source of bone specimens. After the PEA was run, stress was measured at the specific sites in cortical shell and trabecular bone of the model along and between the buttresses. From the corresponding sites on the skull, twenty-five cortical and thirteen cancellous bone specimens were harvested. The specimens were classified into high stress or low stress group based on the stress levels measured via the FEA. Micro-architecture of each specimen was assessed by micro-CT. In the high stress group, cortical bone showed a tendency toward greater thickness and density, lower porosity, and greater pore separation. Stress-related differences in microstructure between the groups were more pronounced in trabecular bone, which showed significantly greater bone volume fraction (BV/TV) and trabecular thickness (Tb.Th) in the high stress group. Our results suggest that the mid-facial bones in the adult dentate male skull exhibit regional variations in cortical and trabecular bone micro-architecture that could be a consequence of different occlusal
PB  - Elsevier Science Inc, New York
T2  - Bone
T1  - Microstructural properties of the mid-facial bones in relation to the distribution of occlusal loading
VL  - 68
SP  - 108
EP  - 114
DO  - 10.1016/j.bone.2014.07.032
ER  - 
@article{
author = "Janović, Aleksa and Milovanović, Petar and Saveljić, Igor and Nikolić, Dalibor and Hahn, Michael and Rakočević, Zoran and Filipović, Nenad and Amling, Michael and Busse, Bjoern and Đurić, Marija",
year = "2014",
abstract = "Although the concept of the occlusal load transfer through the facial skeleton along the buttresses has been extensively studied, there has been no study to link microarchitecture of the mid-facial bones to the occlusal load distribution. The aim of this study was to analyze micro-structural properties of the mid-facial bones in relation to occlusal stress. The study was performed by combining the three-dimensional finite element analysis (3D FEA) and micro-computed tomography analysis (micro-CT). Clenching was simulated on the computer model of the adult male human skull which was also used as a source of bone specimens. After the PEA was run, stress was measured at the specific sites in cortical shell and trabecular bone of the model along and between the buttresses. From the corresponding sites on the skull, twenty-five cortical and thirteen cancellous bone specimens were harvested. The specimens were classified into high stress or low stress group based on the stress levels measured via the FEA. Micro-architecture of each specimen was assessed by micro-CT. In the high stress group, cortical bone showed a tendency toward greater thickness and density, lower porosity, and greater pore separation. Stress-related differences in microstructure between the groups were more pronounced in trabecular bone, which showed significantly greater bone volume fraction (BV/TV) and trabecular thickness (Tb.Th) in the high stress group. Our results suggest that the mid-facial bones in the adult dentate male skull exhibit regional variations in cortical and trabecular bone micro-architecture that could be a consequence of different occlusal",
publisher = "Elsevier Science Inc, New York",
journal = "Bone",
title = "Microstructural properties of the mid-facial bones in relation to the distribution of occlusal loading",
volume = "68",
pages = "108-114",
doi = "10.1016/j.bone.2014.07.032"
}
Janović, A., Milovanović, P., Saveljić, I., Nikolić, D., Hahn, M., Rakočević, Z., Filipović, N., Amling, M., Busse, B.,& Đurić, M.. (2014). Microstructural properties of the mid-facial bones in relation to the distribution of occlusal loading. in Bone
Elsevier Science Inc, New York., 68, 108-114.
https://doi.org/10.1016/j.bone.2014.07.032
Janović A, Milovanović P, Saveljić I, Nikolić D, Hahn M, Rakočević Z, Filipović N, Amling M, Busse B, Đurić M. Microstructural properties of the mid-facial bones in relation to the distribution of occlusal loading. in Bone. 2014;68:108-114.
doi:10.1016/j.bone.2014.07.032 .
Janović, Aleksa, Milovanović, Petar, Saveljić, Igor, Nikolić, Dalibor, Hahn, Michael, Rakočević, Zoran, Filipović, Nenad, Amling, Michael, Busse, Bjoern, Đurić, Marija, "Microstructural properties of the mid-facial bones in relation to the distribution of occlusal loading" in Bone, 68 (2014):108-114,
https://doi.org/10.1016/j.bone.2014.07.032 . .
1
10
7
10