TY  - JOUR
AU  - Vlatkovic Jakovljević, Ivana
AU  - Todorović, Aleksandar
AU  - Budak, Igor
AU  - Sokac, Mario
AU  - Miličić, Biljana
AU  - Špadijer-Gostović, Aleksandra
PY  - 2020
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/2516
AB  - The purpose of the study was to test new method for in vitro evaluation of dental material wear with 3D digitization procedure. Thirty dental crowns, made of polyetheretherketone and veneered with composite material, were subjected to wear test. The crown surface was digitized using coordinate measuring machine before and after the performed wear test. Mesh 3D models were reconstructed and average and maximum depth of lost material and volume loss was calculated (GOM Inspect 2016 software). Mean average depth value amounted 12 7 gm, maximum depth value was 42 gm, while mean volume loss was 0.0024 mm(3). The smallest measured values were 4 gm for depth value and 0.0003 mm(3) for volume loss. Coefficient of variation was very high for all tested parameters (>50%) as a result of data inconsistency. Within the limitations of applied methodology, the possibility of using coordinate measuring machine in measurement of dental material wear was confirmed.
PB  - Japanese Soc Dental Materials Devices, Tokyo
T2  - Dental Materials Journal
T1  - Measurement of dental crown wear-In vitro study
VL  - 39
IS  - 1
SP  - 126
EP  - 134
DO  - 10.4012/dmj.2018-280
ER  - 

@article{
author = "Vlatkovic Jakovljević, Ivana and Todorović, Aleksandar and Budak, Igor and Sokac, Mario and Miličić, Biljana and Špadijer-Gostović, Aleksandra",
year = "2020",
abstract = "The purpose of the study was to test new method for in vitro evaluation of dental material wear with 3D digitization procedure. Thirty dental crowns, made of polyetheretherketone and veneered with composite material, were subjected to wear test. The crown surface was digitized using coordinate measuring machine before and after the performed wear test. Mesh 3D models were reconstructed and average and maximum depth of lost material and volume loss was calculated (GOM Inspect 2016 software). Mean average depth value amounted 12 7 gm, maximum depth value was 42 gm, while mean volume loss was 0.0024 mm(3). The smallest measured values were 4 gm for depth value and 0.0003 mm(3) for volume loss. Coefficient of variation was very high for all tested parameters (>50%) as a result of data inconsistency. Within the limitations of applied methodology, the possibility of using coordinate measuring machine in measurement of dental material wear was confirmed.",
publisher = "Japanese Soc Dental Materials Devices, Tokyo",
journal = "Dental Materials Journal",
title = "Measurement of dental crown wear-In vitro study",
volume = "39",
number = "1",
pages = "126-134",
doi = "10.4012/dmj.2018-280"
}

Vlatkovic Jakovljević, I., Todorović, A., Budak, I., Sokac, M., Miličić, B.,& Špadijer-Gostović, A.. (2020). Measurement of dental crown wear-In vitro study. in Dental Materials Journal
Japanese Soc Dental Materials Devices, Tokyo., 39(1), 126-134.
https://doi.org/10.4012/dmj.2018-280

Vlatkovic Jakovljević I, Todorović A, Budak I, Sokac M, Miličić B, Špadijer-Gostović A. Measurement of dental crown wear-In vitro study. in Dental Materials Journal. 2020;39(1):126-134.
doi:10.4012/dmj.2018-280 .

Vlatkovic Jakovljević, Ivana, Todorović, Aleksandar, Budak, Igor, Sokac, Mario, Miličić, Biljana, Špadijer-Gostović, Aleksandra, "Measurement of dental crown wear-In vitro study" in Dental Materials Journal, 39, no. 1 (2020):126-134,
https://doi.org/10.4012/dmj.2018-280 . .

TY  - JOUR
AU  - Lazić, Vojkan
AU  - Špadijer-Gostović, Aleksandra
AU  - Romcević, Neborga
AU  - Đorđević, Igor
AU  - Todorović, Ana
AU  - Milošević, Nataša
AU  - Rudolf, Rebeka
PY  - 2014
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1942
AB  - The aim of this study is to investigate the mechanical properties of polymethyl methacrylate (PMMA) and thermoplastic polycarbonate (TPC) materials in order to produce night bruxoguards. For this purpose we used a static tensile test. In the next step the microstructures of PMMA and TPC were observed. Within this framework special attention was paid to the examination of the tensile-test tube fracture surfaces for both materials. This approach revealed that PMMA is a brittle and TPC is a plastic material. Certain mechanical properties and a review of the crucial areas confirmed that the TPC material is extremely favourable for making occlusal splints.
PB  - Institute of Metals Technology
T2  - Materiali in Tehnologije
T1  - Mechanical properties of the materials for bruxoguards
VL  - 48
IS  - 6
SP  - 811
EP  - 816
UR  - https://hdl.handle.net/21.15107/rcub_smile_1942
ER  - 

@article{
author = "Lazić, Vojkan and Špadijer-Gostović, Aleksandra and Romcević, Neborga and Đorđević, Igor and Todorović, Ana and Milošević, Nataša and Rudolf, Rebeka",
year = "2014",
abstract = "The aim of this study is to investigate the mechanical properties of polymethyl methacrylate (PMMA) and thermoplastic polycarbonate (TPC) materials in order to produce night bruxoguards. For this purpose we used a static tensile test. In the next step the microstructures of PMMA and TPC were observed. Within this framework special attention was paid to the examination of the tensile-test tube fracture surfaces for both materials. This approach revealed that PMMA is a brittle and TPC is a plastic material. Certain mechanical properties and a review of the crucial areas confirmed that the TPC material is extremely favourable for making occlusal splints.",
publisher = "Institute of Metals Technology",
journal = "Materiali in Tehnologije",
title = "Mechanical properties of the materials for bruxoguards",
volume = "48",
number = "6",
pages = "811-816",
url = "https://hdl.handle.net/21.15107/rcub_smile_1942"
}

Lazić, V., Špadijer-Gostović, A., Romcević, N., Đorđević, I., Todorović, A., Milošević, N.,& Rudolf, R.. (2014). Mechanical properties of the materials for bruxoguards. in Materiali in Tehnologije
Institute of Metals Technology., 48(6), 811-816.
https://hdl.handle.net/21.15107/rcub_smile_1942

Lazić V, Špadijer-Gostović A, Romcević N, Đorđević I, Todorović A, Milošević N, Rudolf R. Mechanical properties of the materials for bruxoguards. in Materiali in Tehnologije. 2014;48(6):811-816.
https://hdl.handle.net/21.15107/rcub_smile_1942 .

Lazić, Vojkan, Špadijer-Gostović, Aleksandra, Romcević, Neborga, Đorđević, Igor, Todorović, Ana, Milošević, Nataša, Rudolf, Rebeka, "Mechanical properties of the materials for bruxoguards" in Materiali in Tehnologije, 48, no. 6 (2014):811-816,
https://hdl.handle.net/21.15107/rcub_smile_1942 .

TY  - JOUR
AU  - Novaković, Nada
AU  - Čakić, Saša
AU  - Todorović, Tatjana
AU  - Anđelski-Radičević, Biljana
AU  - Dožić, Ivan
AU  - Petrović, Vanja
AU  - Perunović, Neda
AU  - Špadijer-Gostović, Aleksandra
AU  - Kadović-Sretenović, Jana
AU  - Čolak, Emina
PY  - 2013
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1796
AB  - Introduction. Oxidative stress and antioxidants play an important role in the pathogenesis of inflammatory disease, including chronic periodontitis (CP). Saliva contains enzymatic (glutathione peroxidase - GPx, superoxide dismutase - SOD, etc.) and non-enzymatic (albumin - ALB, uric acid - UA, glutathione, etc.) antioxidants. Objective. The aims of this study were to investigate: a) level of SOD, GPx, UA, ALB and total antioxidative status (TAS) of saliva in CP patients before and after non-surgical treatment, and b) correlations between clinical periodontal parameters and levels of salivary antioxidants. Methods. Saliva was collected from 21 CP patients before and after non-surgical treatment. The condition of periodontium was assessed by plaque index, gingival index, bleeding on probing, probing depth and clinical attachment loss. Level of investigated antioxidants (except GPx) and TAS was determined using colorimetric method and commercial kits. GPx activity was determined using UV method and commercial kits. Results. After the treatment significant increase of UA, ALB, Gpx, TAS was detected (p lt 0.01) and decrease of SOD activity (p>0.05). A significant correlation was observed between GPx and PI (r=0.575, p=0.008), SOD and GI (r=0.525, p=0.017) before therapy, and SOD and bleeding on probing (BP) (r=0.59, p=0.006), TAS and BP (r=0.453, p=0.045) after therapy. Conclusion. These data suggest that levels of salivary antioxidants generally increase after non-surgical periodontal treatment. Correlation between some clinical periodontal parameters and level of salivary antioxidants was found.
AB  - Uvod. Oksidativni stres i antioksidansi igraju važnu ulogu u patogenezi zapaljenjskih oboljenja, uključujući i hroničnu parodontopatiju. Pljuvačka sadrži enzimske antioksidanse, kao što su glutation-peroksidaza (GPx) i superoksid-dismutaza (SOD), i neenzimske antioksidanse, poput albumina (ALB), mokraćne kiseline (UA), glutationa itd. Cilj rada. Cilj istraživanja bio je da se ispitaju nivoi SOD, GPx, UA i ALB i utvrdi ukupan antioksidantni status pljuvačke (TAS) kod osoba s hroničnom parodontopatijom pre i posle kauzalne terapije, te ustanove korelacije između kliničkih pokazatelja stanja parodoncijuma i nivoa antioksidansa u pljuvački. Metode rada. Pljuvačka je sakupljena od 21 pacijenta s hroničnom parodontopatijom pre i posle kauzalne terapije. Stanje parodoncijuma je procenjivano pomoću: plak-indeksa (PI), gingivalnog indeksa (GI), indeksa krvarenja gingive (BP), dubine parodontalnog džepa i nivoa pripojnog epitela. Nivo ispitivanih antioksidansa (osim GPx) i TAS određivan je pomoću kolorimetrijske metode i komercijalnih reagensa. GPx je određivan primenom UV metode i komercijalnih reagensa. Rezultati. Nakon terapije ustanovljeni su značajno povećanje koncentracije UA, GPx i TAS (p lt 0,01) i smanjenje aktivnosti SOD (p>0,05). Primećena je i značajna korelacija između GPx i PI (r=0,575; p=0,008), te SOD i GI (r=0,525; p=0,017) pre terapije, odnosno SOD i BP (r=0,59; p=0,006), kao i TAS i BP (r=0,453; p=0,045) posle nje. Zaključak. Dobijeni nalazi pokazuju da se nivoi antioksidansa u pljuvački povećavaju nakon kauzalne terapije parodontopatije. Uočene su pozitivne korelacije između kliničkih pokazatelja stanja parodoncijuma i ispitivanih koncentracija antioksidansa u pljuvački.
PB  - Srpsko lekarsko društvo, Beograd
T2  - Srpski arhiv za celokupno lekarstvo
T1  - Antioxidative status of saliva before and after non-surgical periodontal treatment
T1  - Antioksidantni status pljuvačke pre i posle kauzalne terapije parodontopatije
VL  - 141
IS  - 3-4
SP  - 163
EP  - 168
DO  - 10.2298/SARH1304163N
ER  - 

@article{
author = "Novaković, Nada and Čakić, Saša and Todorović, Tatjana and Anđelski-Radičević, Biljana and Dožić, Ivan and Petrović, Vanja and Perunović, Neda and Špadijer-Gostović, Aleksandra and Kadović-Sretenović, Jana and Čolak, Emina",
year = "2013",
abstract = "Introduction. Oxidative stress and antioxidants play an important role in the pathogenesis of inflammatory disease, including chronic periodontitis (CP). Saliva contains enzymatic (glutathione peroxidase - GPx, superoxide dismutase - SOD, etc.) and non-enzymatic (albumin - ALB, uric acid - UA, glutathione, etc.) antioxidants. Objective. The aims of this study were to investigate: a) level of SOD, GPx, UA, ALB and total antioxidative status (TAS) of saliva in CP patients before and after non-surgical treatment, and b) correlations between clinical periodontal parameters and levels of salivary antioxidants. Methods. Saliva was collected from 21 CP patients before and after non-surgical treatment. The condition of periodontium was assessed by plaque index, gingival index, bleeding on probing, probing depth and clinical attachment loss. Level of investigated antioxidants (except GPx) and TAS was determined using colorimetric method and commercial kits. GPx activity was determined using UV method and commercial kits. Results. After the treatment significant increase of UA, ALB, Gpx, TAS was detected (p lt 0.01) and decrease of SOD activity (p>0.05). A significant correlation was observed between GPx and PI (r=0.575, p=0.008), SOD and GI (r=0.525, p=0.017) before therapy, and SOD and bleeding on probing (BP) (r=0.59, p=0.006), TAS and BP (r=0.453, p=0.045) after therapy. Conclusion. These data suggest that levels of salivary antioxidants generally increase after non-surgical periodontal treatment. Correlation between some clinical periodontal parameters and level of salivary antioxidants was found., Uvod. Oksidativni stres i antioksidansi igraju važnu ulogu u patogenezi zapaljenjskih oboljenja, uključujući i hroničnu parodontopatiju. Pljuvačka sadrži enzimske antioksidanse, kao što su glutation-peroksidaza (GPx) i superoksid-dismutaza (SOD), i neenzimske antioksidanse, poput albumina (ALB), mokraćne kiseline (UA), glutationa itd. Cilj rada. Cilj istraživanja bio je da se ispitaju nivoi SOD, GPx, UA i ALB i utvrdi ukupan antioksidantni status pljuvačke (TAS) kod osoba s hroničnom parodontopatijom pre i posle kauzalne terapije, te ustanove korelacije između kliničkih pokazatelja stanja parodoncijuma i nivoa antioksidansa u pljuvački. Metode rada. Pljuvačka je sakupljena od 21 pacijenta s hroničnom parodontopatijom pre i posle kauzalne terapije. Stanje parodoncijuma je procenjivano pomoću: plak-indeksa (PI), gingivalnog indeksa (GI), indeksa krvarenja gingive (BP), dubine parodontalnog džepa i nivoa pripojnog epitela. Nivo ispitivanih antioksidansa (osim GPx) i TAS određivan je pomoću kolorimetrijske metode i komercijalnih reagensa. GPx je određivan primenom UV metode i komercijalnih reagensa. Rezultati. Nakon terapije ustanovljeni su značajno povećanje koncentracije UA, GPx i TAS (p lt 0,01) i smanjenje aktivnosti SOD (p>0,05). Primećena je i značajna korelacija između GPx i PI (r=0,575; p=0,008), te SOD i GI (r=0,525; p=0,017) pre terapije, odnosno SOD i BP (r=0,59; p=0,006), kao i TAS i BP (r=0,453; p=0,045) posle nje. Zaključak. Dobijeni nalazi pokazuju da se nivoi antioksidansa u pljuvački povećavaju nakon kauzalne terapije parodontopatije. Uočene su pozitivne korelacije između kliničkih pokazatelja stanja parodoncijuma i ispitivanih koncentracija antioksidansa u pljuvački.",
publisher = "Srpsko lekarsko društvo, Beograd",
journal = "Srpski arhiv za celokupno lekarstvo",
title = "Antioxidative status of saliva before and after non-surgical periodontal treatment, Antioksidantni status pljuvačke pre i posle kauzalne terapije parodontopatije",
volume = "141",
number = "3-4",
pages = "163-168",
doi = "10.2298/SARH1304163N"
}

Novaković, N., Čakić, S., Todorović, T., Anđelski-Radičević, B., Dožić, I., Petrović, V., Perunović, N., Špadijer-Gostović, A., Kadović-Sretenović, J.,& Čolak, E.. (2013). Antioxidative status of saliva before and after non-surgical periodontal treatment. in Srpski arhiv za celokupno lekarstvo
Srpsko lekarsko društvo, Beograd., 141(3-4), 163-168.
https://doi.org/10.2298/SARH1304163N

Novaković N, Čakić S, Todorović T, Anđelski-Radičević B, Dožić I, Petrović V, Perunović N, Špadijer-Gostović A, Kadović-Sretenović J, Čolak E. Antioxidative status of saliva before and after non-surgical periodontal treatment. in Srpski arhiv za celokupno lekarstvo. 2013;141(3-4):163-168.
doi:10.2298/SARH1304163N .

Novaković, Nada, Čakić, Saša, Todorović, Tatjana, Anđelski-Radičević, Biljana, Dožić, Ivan, Petrović, Vanja, Perunović, Neda, Špadijer-Gostović, Aleksandra, Kadović-Sretenović, Jana, Čolak, Emina, "Antioxidative status of saliva before and after non-surgical periodontal treatment" in Srpski arhiv za celokupno lekarstvo, 141, no. 3-4 (2013):163-168,
https://doi.org/10.2298/SARH1304163N . .

TY  - JOUR
AU  - Todorović, Ana
AU  - Todorović, Aleksandar
AU  - Špadijer-Gostović, Aleksandra
AU  - Lazić, Vojkan
AU  - Miličić, Biljana
AU  - Đurišić, Slobodan
PY  - 2013
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1801
AB  - Background/Aim. Color matching in prosthodontic therapy is a very important task because it influences the esthetic value of dental restorations. Visual shade matching represents the most frequently applied method in clinical practice. Instrumental measurements provide objective and quantified data in color assessment of natural teeth and restorations. In instrumental shade analysis, the goal is to achieve the smallest ΔE value possible, indicating the most accurate shade match. The aim of this study was to evaluate the reliability of commercially available ceramic shade guides. Methods. VITA Easyshade spectrophotometer (VITA, Germany) was used for instrumental color determination. Utilizing this device, color samples of ten VITA Classical and ten VITA 3D - Master shade guides were analyzed. Each color sample from all shade guides was measured three times and the basic parameters of color quality were examined: ΔL, ΔC, ΔH, ΔE, ΔElc. Based on these parameters spectrophotometer marks the shade matching as good, fair or adjust. Results. After performing 1,248 measurements of ceramic color samples, frequency of evaluations adjust, fair and good were statistically significantly different between VITA Classical and VITA 3D Master shade guides (p = 0.002). There were 27.1% cases scored as adjust, 66.3% as fair and 6.7% as good. In VITA 3D - Master shade guides 30.9% cases were evaluated as adjust, 66.4% as fair and 2.7% cases as good. Conclusion. Color samples from different shade guides, produced by the same manufacturer, show variability in basic color parameters, which once again proves the lack of precision and nonuniformity of the conventional method.
AB  - Uvod/Cilj. Određivanje boje zuba u protetskoj terapiji predstavlja veoma važan zadatak jer utiče na prirodan izgled i estetsku vrednost zubnih nadoknada. Vizuelni metod određivanja boje zuba najčešće se koristi u kliničkoj praksi. Instrumentalna merenja pružaju objektivne i kvantifikovane podatke u proceni boje prirodnih zuba i restauracija. U instrumentalnoj analizi boje cilj je da se postigne najmanja moguća vrednost ΔE, što predstavlja najtačniji izbor nijanse. Cilj ovog istraživanja bio je da se utvrdi pouzdanost najčešće korišćenih ključeva za određivanje boje zuba. Metode. Za instrumentalni izbor boje korišćen je VITA Easyshade spektrofotometar (VITA, Germany). Uz pomoć ovog uređaja, analizirani su uzorci boja 10 VITA Classical i 10 VITA 3D - Master ključeva boja. Svaki uzorak boje analiziran je tri puta i ispitivani su osnovni parametri kvaliteta boje: ΔL, ΔC, ΔH, ΔE, ΔElc. Stepen poklapanje boje nadoknade sa ciljnom nijansom spektrofotometar izražava kroz tri ocene kvaliteta: good, fair i adjust. Rezultati. Nakon izvršenih 1 248 merenja keramičkih uzoraka boje, frekvencije ocena adjust, fair i good statistički su se značajno razlikovale između VITA Classical i VITA 3D - Master ključeva boja (p = 0.002). U VITA Classical ključu boja bilo je 27,1% ocene adjust, 66,3% fair i 6,7% ocene good. U VITA 3D - Master ključu boja bilo je 30,9% ocene adjust, 66,4% fair i 2,7% ocene good. Zaključak. Uzorci boje iz različitih ključeva boja proizvedenih od istog proizvođača, pokazuju varijabilnost u osnovnim parametrima boje, što ukazuje na nepreciznost i neuniformnost konvencionalne metode.
PB  - Vojnomedicinska akademija - Institut za naučne informacije, Beograd
T2  - Vojnosanitetski pregled
T1  - Reliability of conventional shade guides in teeth color determination
T1  - Pouzdanost primene konvencionalnih ključeva za određivanje boje zuba
VL  - 70
IS  - 10
SP  - 929
EP  - 934
DO  - 10.2298/VSP110513019T
ER  - 

@article{
author = "Todorović, Ana and Todorović, Aleksandar and Špadijer-Gostović, Aleksandra and Lazić, Vojkan and Miličić, Biljana and Đurišić, Slobodan",
year = "2013",
abstract = "Background/Aim. Color matching in prosthodontic therapy is a very important task because it influences the esthetic value of dental restorations. Visual shade matching represents the most frequently applied method in clinical practice. Instrumental measurements provide objective and quantified data in color assessment of natural teeth and restorations. In instrumental shade analysis, the goal is to achieve the smallest ΔE value possible, indicating the most accurate shade match. The aim of this study was to evaluate the reliability of commercially available ceramic shade guides. Methods. VITA Easyshade spectrophotometer (VITA, Germany) was used for instrumental color determination. Utilizing this device, color samples of ten VITA Classical and ten VITA 3D - Master shade guides were analyzed. Each color sample from all shade guides was measured three times and the basic parameters of color quality were examined: ΔL, ΔC, ΔH, ΔE, ΔElc. Based on these parameters spectrophotometer marks the shade matching as good, fair or adjust. Results. After performing 1,248 measurements of ceramic color samples, frequency of evaluations adjust, fair and good were statistically significantly different between VITA Classical and VITA 3D Master shade guides (p = 0.002). There were 27.1% cases scored as adjust, 66.3% as fair and 6.7% as good. In VITA 3D - Master shade guides 30.9% cases were evaluated as adjust, 66.4% as fair and 2.7% cases as good. Conclusion. Color samples from different shade guides, produced by the same manufacturer, show variability in basic color parameters, which once again proves the lack of precision and nonuniformity of the conventional method., Uvod/Cilj. Određivanje boje zuba u protetskoj terapiji predstavlja veoma važan zadatak jer utiče na prirodan izgled i estetsku vrednost zubnih nadoknada. Vizuelni metod određivanja boje zuba najčešće se koristi u kliničkoj praksi. Instrumentalna merenja pružaju objektivne i kvantifikovane podatke u proceni boje prirodnih zuba i restauracija. U instrumentalnoj analizi boje cilj je da se postigne najmanja moguća vrednost ΔE, što predstavlja najtačniji izbor nijanse. Cilj ovog istraživanja bio je da se utvrdi pouzdanost najčešće korišćenih ključeva za određivanje boje zuba. Metode. Za instrumentalni izbor boje korišćen je VITA Easyshade spektrofotometar (VITA, Germany). Uz pomoć ovog uređaja, analizirani su uzorci boja 10 VITA Classical i 10 VITA 3D - Master ključeva boja. Svaki uzorak boje analiziran je tri puta i ispitivani su osnovni parametri kvaliteta boje: ΔL, ΔC, ΔH, ΔE, ΔElc. Stepen poklapanje boje nadoknade sa ciljnom nijansom spektrofotometar izražava kroz tri ocene kvaliteta: good, fair i adjust. Rezultati. Nakon izvršenih 1 248 merenja keramičkih uzoraka boje, frekvencije ocena adjust, fair i good statistički su se značajno razlikovale između VITA Classical i VITA 3D - Master ključeva boja (p = 0.002). U VITA Classical ključu boja bilo je 27,1% ocene adjust, 66,3% fair i 6,7% ocene good. U VITA 3D - Master ključu boja bilo je 30,9% ocene adjust, 66,4% fair i 2,7% ocene good. Zaključak. Uzorci boje iz različitih ključeva boja proizvedenih od istog proizvođača, pokazuju varijabilnost u osnovnim parametrima boje, što ukazuje na nepreciznost i neuniformnost konvencionalne metode.",
publisher = "Vojnomedicinska akademija - Institut za naučne informacije, Beograd",
journal = "Vojnosanitetski pregled",
title = "Reliability of conventional shade guides in teeth color determination, Pouzdanost primene konvencionalnih ključeva za određivanje boje zuba",
volume = "70",
number = "10",
pages = "929-934",
doi = "10.2298/VSP110513019T"
}

Todorović, A., Todorović, A., Špadijer-Gostović, A., Lazić, V., Miličić, B.,& Đurišić, S.. (2013). Reliability of conventional shade guides in teeth color determination. in Vojnosanitetski pregled
Vojnomedicinska akademija - Institut za naučne informacije, Beograd., 70(10), 929-934.
https://doi.org/10.2298/VSP110513019T

Todorović A, Todorović A, Špadijer-Gostović A, Lazić V, Miličić B, Đurišić S. Reliability of conventional shade guides in teeth color determination. in Vojnosanitetski pregled. 2013;70(10):929-934.
doi:10.2298/VSP110513019T .

Todorović, Ana, Todorović, Aleksandar, Špadijer-Gostović, Aleksandra, Lazić, Vojkan, Miličić, Biljana, Đurišić, Slobodan, "Reliability of conventional shade guides in teeth color determination" in Vojnosanitetski pregled, 70, no. 10 (2013):929-934,
https://doi.org/10.2298/VSP110513019T . .

TY  - JOUR
AU  - Jovičić, Bojan
AU  - Lazić, Zoran
AU  - Nedić, Milica
AU  - Matijević, Stevo
AU  - Špadijer-Gostović, Aleksandra
PY  - 2013
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1781
AB  - Background/Aim. Gingival recession progression in clinical practaice has influenced the development of various surgical procedures and techniques for solving esthetic imperfections and subjective difficulties coused by gingival recession. The aim of this study was to verify efficacy of surgical procedures and to compare both of surgical procedures through the keratinized tissue width. Methods. The study included 20 teeth with gingival recesion, Müller class I and II. Ten teeth with gingival recession were treated with connective tissue autotransplants with periosteum in combination with coronary guided surgical flap (CTG group). On the contralateral side 10 teeth with gingival recession were treated with the same surgical procedures but in combination with platelet-rich plasma (CTGPRP group). We measured the keratinized tissue width. For statistical significance we used the Student's t-test. Results. The study reveled a statistical significance in reducing vertical deepress of recession by both used treatments. Root deepness in CTG and CTG-PRP group was 90% and 93.5%, respectively. With both surgical techniques we achieved larger zone of keratinized gingiva but with a wide zone of keratinized tissue in CTG - the PRP group. Conclusion. The concept regeneration technique with PRP and with the stimulating influence of platele activated growth factors results in the regeneration of deep periodontal tissue as an important prerequisite for the successful treatment of gingival recession.
AB  - Uvod/Cilj. Sve veća zastupljenost gingivalnih recesija u svakodnevnoj kliničkoj praksi uslovila je zahteve za što efikasnijim rekonstruktivnim hirurškim procedurama, u cilju rešavanja estetskih nedostataka i subjektivnih tegoba usled povlačenja gingive. Cilj rada bio je da se uporedi efikasnost lečenja autotransplantatom vezivnog tkiva (ATVT) sa periostom i plazme obogaćene trombocitima (PRP) sa ATVT sa periostom, ali bez PRP, na širinu keratinizirane gingive. Metode. Studijama je bilo obuhvaćeno 20 zuba sa recesijama gingive klase I i II prema Mülleru. U toku terapije 10 recesija lečeno je ATVT sa periostom u kombinaciji sa koronarno pomerenim režnjima (ATVT grupa). Na kontralateralnoj strani, isti broj recesija lečen je ATVT uz koronarno pomeren režanj i uz primenu PRP (PRP + ATVT grupa). Od kliničkih parametara praćena je širina keratinizovane gingive kao pokazatelj pokrenutih regenerativnih procesa. U statističkoj obradi rezultata korišćen je Studentov t-test. Rezultati. Analizom kliničkih parametara ustanovljeno je statistički značajno proširenje zone keratinizirane gingive, što je od izuzetnog značaja za regeneraciju s tim što je proširenje bilo izraženije u ATVT + PRP grupi. Procentualno gledano, prekrivenost korena u ATVT grupi iznosila je 90%, a u ATVT + PRP grupi 93,5%. Zaključak. Primenom koncepta aktivne regeneracije odnosno primenom PRP i stimulativnim dejstvom aktiviranih faktora rasta iz trombocita, postiže se regeneracija dubljeg periodontalnog tkiva što je bitan preduslov za uspešno zbrinjavanje recesije gingive.
PB  - Vojnomedicinska akademija - Institut za naučne informacije, Beograd
T2  - Vojnosanitetski pregled
T1  - Therapeutic efficacy of connective tissue autotransplants with periosteum and platelet rich plasma in the management of gingival recession
T1  - Terapijski efekat plazme obogaćene trombocitima i autotransplantata vezivnog tkiva sa periostom u zbrinjavanju gingivalnih recesija
VL  - 70
IS  - 7
SP  - 664
EP  - 669
DO  - 10.2298/VSP1307664J
ER  - 

@article{
author = "Jovičić, Bojan and Lazić, Zoran and Nedić, Milica and Matijević, Stevo and Špadijer-Gostović, Aleksandra",
year = "2013",
abstract = "Background/Aim. Gingival recession progression in clinical practaice has influenced the development of various surgical procedures and techniques for solving esthetic imperfections and subjective difficulties coused by gingival recession. The aim of this study was to verify efficacy of surgical procedures and to compare both of surgical procedures through the keratinized tissue width. Methods. The study included 20 teeth with gingival recesion, Müller class I and II. Ten teeth with gingival recession were treated with connective tissue autotransplants with periosteum in combination with coronary guided surgical flap (CTG group). On the contralateral side 10 teeth with gingival recession were treated with the same surgical procedures but in combination with platelet-rich plasma (CTGPRP group). We measured the keratinized tissue width. For statistical significance we used the Student's t-test. Results. The study reveled a statistical significance in reducing vertical deepress of recession by both used treatments. Root deepness in CTG and CTG-PRP group was 90% and 93.5%, respectively. With both surgical techniques we achieved larger zone of keratinized gingiva but with a wide zone of keratinized tissue in CTG - the PRP group. Conclusion. The concept regeneration technique with PRP and with the stimulating influence of platele activated growth factors results in the regeneration of deep periodontal tissue as an important prerequisite for the successful treatment of gingival recession., Uvod/Cilj. Sve veća zastupljenost gingivalnih recesija u svakodnevnoj kliničkoj praksi uslovila je zahteve za što efikasnijim rekonstruktivnim hirurškim procedurama, u cilju rešavanja estetskih nedostataka i subjektivnih tegoba usled povlačenja gingive. Cilj rada bio je da se uporedi efikasnost lečenja autotransplantatom vezivnog tkiva (ATVT) sa periostom i plazme obogaćene trombocitima (PRP) sa ATVT sa periostom, ali bez PRP, na širinu keratinizirane gingive. Metode. Studijama je bilo obuhvaćeno 20 zuba sa recesijama gingive klase I i II prema Mülleru. U toku terapije 10 recesija lečeno je ATVT sa periostom u kombinaciji sa koronarno pomerenim režnjima (ATVT grupa). Na kontralateralnoj strani, isti broj recesija lečen je ATVT uz koronarno pomeren režanj i uz primenu PRP (PRP + ATVT grupa). Od kliničkih parametara praćena je širina keratinizovane gingive kao pokazatelj pokrenutih regenerativnih procesa. U statističkoj obradi rezultata korišćen je Studentov t-test. Rezultati. Analizom kliničkih parametara ustanovljeno je statistički značajno proširenje zone keratinizirane gingive, što je od izuzetnog značaja za regeneraciju s tim što je proširenje bilo izraženije u ATVT + PRP grupi. Procentualno gledano, prekrivenost korena u ATVT grupi iznosila je 90%, a u ATVT + PRP grupi 93,5%. Zaključak. Primenom koncepta aktivne regeneracije odnosno primenom PRP i stimulativnim dejstvom aktiviranih faktora rasta iz trombocita, postiže se regeneracija dubljeg periodontalnog tkiva što je bitan preduslov za uspešno zbrinjavanje recesije gingive.",
publisher = "Vojnomedicinska akademija - Institut za naučne informacije, Beograd",
journal = "Vojnosanitetski pregled",
title = "Therapeutic efficacy of connective tissue autotransplants with periosteum and platelet rich plasma in the management of gingival recession, Terapijski efekat plazme obogaćene trombocitima i autotransplantata vezivnog tkiva sa periostom u zbrinjavanju gingivalnih recesija",
volume = "70",
number = "7",
pages = "664-669",
doi = "10.2298/VSP1307664J"
}

Jovičić, B., Lazić, Z., Nedić, M., Matijević, S.,& Špadijer-Gostović, A.. (2013). Therapeutic efficacy of connective tissue autotransplants with periosteum and platelet rich plasma in the management of gingival recession. in Vojnosanitetski pregled
Vojnomedicinska akademija - Institut za naučne informacije, Beograd., 70(7), 664-669.
https://doi.org/10.2298/VSP1307664J

Jovičić B, Lazić Z, Nedić M, Matijević S, Špadijer-Gostović A. Therapeutic efficacy of connective tissue autotransplants with periosteum and platelet rich plasma in the management of gingival recession. in Vojnosanitetski pregled. 2013;70(7):664-669.
doi:10.2298/VSP1307664J .

Jovičić, Bojan, Lazić, Zoran, Nedić, Milica, Matijević, Stevo, Špadijer-Gostović, Aleksandra, "Therapeutic efficacy of connective tissue autotransplants with periosteum and platelet rich plasma in the management of gingival recession" in Vojnosanitetski pregled, 70, no. 7 (2013):664-669,
https://doi.org/10.2298/VSP1307664J . .

TY  - JOUR
AU  - Maksimović, Miloš
AU  - Špadijer-Gostović, Aleksandra
AU  - Todorović, Aleksandar
AU  - Romcević, Nebojsa
AU  - Rudolf, Rebeka
AU  - Todorović, Ana
PY  - 2012
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1685
AB  - The aim of this study was to assess and compare the mechanical resistance and the retentive force of metal and composite post systems cemented with different types of cements. Three different designs of prefabricated titanium alloy posts were used in the study, i.e., active, passive and combined, as well as AgPd cast posts and two different fibre-reinforced composite post systems. In accordance with the experimental design these posts were cemented with zinc phosphate, self-curing composite resin or self-adhesive, self-etching, luting agent. Comparing the results between the different metal post designs, cemented with zinc phosphate, a statistically significant difference in the retention was found between all the analysed posts. The best results with the pull-out test were obtained with the active posts, then the passive, followed by the combined posts. The metal cast posts cemented conventionally with Zn-phosphate demonstrated the lowest retentive force value, based on all the measurements. The bond strengths between the post and the root dentine were influenced statistically by the post design (active, passive, combined or cast) and material, metal vs. composite. The active Ti posts showed significantly superior retention in combination with all the cements. The Ti alloy posts achieved higher retentive force values than the composite posts, in general. The composite cements compared to the Zn-phosphate ensure a better retentive strength for all the posts, including individually cast posts.
PB  - Institute of Metals and Technology
T2  - Materiali in Tehnologije
T1  - In-vitro evaluation of the retention of different prefabricated posts luted with different cements
VL  - 46
IS  - 6
SP  - 595
EP  - 599
UR  - https://hdl.handle.net/21.15107/rcub_smile_1685
ER  - 

@article{
author = "Maksimović, Miloš and Špadijer-Gostović, Aleksandra and Todorović, Aleksandar and Romcević, Nebojsa and Rudolf, Rebeka and Todorović, Ana",
year = "2012",
abstract = "The aim of this study was to assess and compare the mechanical resistance and the retentive force of metal and composite post systems cemented with different types of cements. Three different designs of prefabricated titanium alloy posts were used in the study, i.e., active, passive and combined, as well as AgPd cast posts and two different fibre-reinforced composite post systems. In accordance with the experimental design these posts were cemented with zinc phosphate, self-curing composite resin or self-adhesive, self-etching, luting agent. Comparing the results between the different metal post designs, cemented with zinc phosphate, a statistically significant difference in the retention was found between all the analysed posts. The best results with the pull-out test were obtained with the active posts, then the passive, followed by the combined posts. The metal cast posts cemented conventionally with Zn-phosphate demonstrated the lowest retentive force value, based on all the measurements. The bond strengths between the post and the root dentine were influenced statistically by the post design (active, passive, combined or cast) and material, metal vs. composite. The active Ti posts showed significantly superior retention in combination with all the cements. The Ti alloy posts achieved higher retentive force values than the composite posts, in general. The composite cements compared to the Zn-phosphate ensure a better retentive strength for all the posts, including individually cast posts.",
publisher = "Institute of Metals and Technology",
journal = "Materiali in Tehnologije",
title = "In-vitro evaluation of the retention of different prefabricated posts luted with different cements",
volume = "46",
number = "6",
pages = "595-599",
url = "https://hdl.handle.net/21.15107/rcub_smile_1685"
}

Maksimović, M., Špadijer-Gostović, A., Todorović, A., Romcević, N., Rudolf, R.,& Todorović, A.. (2012). In-vitro evaluation of the retention of different prefabricated posts luted with different cements. in Materiali in Tehnologije
Institute of Metals and Technology., 46(6), 595-599.
https://hdl.handle.net/21.15107/rcub_smile_1685

Maksimović M, Špadijer-Gostović A, Todorović A, Romcević N, Rudolf R, Todorović A. In-vitro evaluation of the retention of different prefabricated posts luted with different cements. in Materiali in Tehnologije. 2012;46(6):595-599.
https://hdl.handle.net/21.15107/rcub_smile_1685 .

Maksimović, Miloš, Špadijer-Gostović, Aleksandra, Todorović, Aleksandar, Romcević, Nebojsa, Rudolf, Rebeka, Todorović, Ana, "In-vitro evaluation of the retention of different prefabricated posts luted with different cements" in Materiali in Tehnologije, 46, no. 6 (2012):595-599,
https://hdl.handle.net/21.15107/rcub_smile_1685 .

TY  - JOUR
AU  - Špadijer-Gostović, Aleksandra
AU  - Todorović, Aleksandar
AU  - Lazić, Vojkan
AU  - Todorović, Ana
AU  - Milinković, Iva
AU  - Leković, Vojislav
PY  - 2012
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1716
AB  - Background/Aim. Immediate loading is considered to be the most innovative technique in contemporary implant dentistry. Recent clinical and experimental findings have demonstrated that only implants with high primary stability can be subjected to immediate loading protocol with predictable results. It is generally accepted that the most important prerequsite for successful osseointegration is achievement and maintenance of implant stability. The aim of this in vivo study was to investigate the possibility for successful application of immediate loading protocol in implant systems with different surface properties. Methods. In the experimental study 2 mongrel dogs were edentulated bilaterally in the mandibular and maxillary premolar areas. After 3 months implants were placed in a pattern 4 different commercially available implants per quadrant (n = 32): Mk III TiUnite (Nobel Biocare, Sweden), ITI TPS (Straumann, Switzerland), 3IOsseotite (Implant Innovation, USA) and XiVE Cell-Plus (Friadent, Germany). Implants were subjected to immediate loading with 4 unit gold cast bridges, 2 days post implantation. The assessment of implant stability and immediate loading possibilities were done by performing Resonance frequency analysis (RFA). Results. After a 6- month loading period all bridges were in function and all implants occurred well osseointegrated. When summarizing the Implant Stability Quotient (ISQ) values, it was noted that resonance frequency was significantly higher for mandibular implants. The results of this experimental setting showed that all evaluated surfaces achieved good implant stability. Increase of ISQ values was found for all implants in the mandible and partially decrease of ISQ values for maxillary implants after 6 months of functional loading with 4 unit bridges. Conclusions. Investigated endooseal implants did not show different degree of osseointegration, because there was not statistically significant difference among observed parameters (ISQh i ISQp) between implant systems.
AB  - Uvod/Cilj. Imedijatno opterećenje implantata smatra se jednim od najznačajnijih dostignuća savremene dentalne implantologije. Rezultati novijih kliničkih i eksperimentalnih studija pokazali su da samo implantati visoke primarne stabilnosti mogu biti izloženi protokolu imedijatnog opterećenja zubnom nadoknadom sa predvidivim ishodom. Cilj studije bio je da se ispita mogućnost uspešne primene protokola imedijatnog opterećenja implantata različitog mikrodizajna fiksnim zubnim nadoknadama. Metode. U eksperimentalno istraživanje uključena su dva psa, obezubljena obostrano u premolarnoj regiji gornje i donje vilice. Nakon tri meseca od ekstrakcije zuba, ugrađena su, po predviđenoj šemi, četiri različita implantata po kvadrantu (n = 32): Mk III TiUnite (Nobel Biocare, Sweden), ITI TPS (Straumann, Switzerland), 3I-Osseotite (Implant Innovation, USA) i XiVE Cell-Plus (Friadent, Germany). Implantati su imedijatno opterećeni fiksnim zubnim nadoknadama, četvoročlanim mostovima od plemenite legure zlato-platina, dva dana posle implantacije. Stabilnost implantata i mogućnost imedijatnog opterećenja ocenjivana je na osnovu analize rezonantnih frekvencija (RFA). Rezultati. Šest meseci nakon implantacije i imedijatnog opterećenja fiksnom zubnom nadoknadom, svi mostovi bili su u funkciji i svi implantati uspešno integrisani, ne pokazujući znake mobilnosti. Sumiranjem dobijenih vrednosti koeficijenta stabilnosti implantata (ISQ) ustanovljeno je da su rezonantne frekvencije bile značajno veće kod implantata u donjoj vilici. Rezultati eksperimentalnog istraživanja pokazali su da su sve analizirane površine ostvarile dobru implantatnu stabilnost. Utvrđen je porast ISQ vrednosti kod svih implantata u mandibuli i delimičan pad ISQ vrednosti za implantate u maksili, nakon šest meseci funkcionalnog opterećenja fiksnim zubnim nadoknadama. Zaključak. Ispitivani endoosealni implantati nisu pokazali različit stepen oseointegracije jer se rezultati merenih parametara hirurških (ISQh) i protetkih (ISQp), nisu statistički značajno razlikovali između implantatnih sistema.
PB  - Vojnomedicinska akademija - Institut za naučne informacije, Beograd
T2  - Vojnosanitetski pregled
T1  - Immediate implant loading with fixed dental restorations: An animal model study
T1  - Imedijatno opterećenje implantata fiksnim zubnim nadoknadama - studija na psima
VL  - 69
IS  - 2
SP  - 181
EP  - 189
DO  - 10.2298/VSP1202181S
ER  - 

@article{
author = "Špadijer-Gostović, Aleksandra and Todorović, Aleksandar and Lazić, Vojkan and Todorović, Ana and Milinković, Iva and Leković, Vojislav",
year = "2012",
abstract = "Background/Aim. Immediate loading is considered to be the most innovative technique in contemporary implant dentistry. Recent clinical and experimental findings have demonstrated that only implants with high primary stability can be subjected to immediate loading protocol with predictable results. It is generally accepted that the most important prerequsite for successful osseointegration is achievement and maintenance of implant stability. The aim of this in vivo study was to investigate the possibility for successful application of immediate loading protocol in implant systems with different surface properties. Methods. In the experimental study 2 mongrel dogs were edentulated bilaterally in the mandibular and maxillary premolar areas. After 3 months implants were placed in a pattern 4 different commercially available implants per quadrant (n = 32): Mk III TiUnite (Nobel Biocare, Sweden), ITI TPS (Straumann, Switzerland), 3IOsseotite (Implant Innovation, USA) and XiVE Cell-Plus (Friadent, Germany). Implants were subjected to immediate loading with 4 unit gold cast bridges, 2 days post implantation. The assessment of implant stability and immediate loading possibilities were done by performing Resonance frequency analysis (RFA). Results. After a 6- month loading period all bridges were in function and all implants occurred well osseointegrated. When summarizing the Implant Stability Quotient (ISQ) values, it was noted that resonance frequency was significantly higher for mandibular implants. The results of this experimental setting showed that all evaluated surfaces achieved good implant stability. Increase of ISQ values was found for all implants in the mandible and partially decrease of ISQ values for maxillary implants after 6 months of functional loading with 4 unit bridges. Conclusions. Investigated endooseal implants did not show different degree of osseointegration, because there was not statistically significant difference among observed parameters (ISQh i ISQp) between implant systems., Uvod/Cilj. Imedijatno opterećenje implantata smatra se jednim od najznačajnijih dostignuća savremene dentalne implantologije. Rezultati novijih kliničkih i eksperimentalnih studija pokazali su da samo implantati visoke primarne stabilnosti mogu biti izloženi protokolu imedijatnog opterećenja zubnom nadoknadom sa predvidivim ishodom. Cilj studije bio je da se ispita mogućnost uspešne primene protokola imedijatnog opterećenja implantata različitog mikrodizajna fiksnim zubnim nadoknadama. Metode. U eksperimentalno istraživanje uključena su dva psa, obezubljena obostrano u premolarnoj regiji gornje i donje vilice. Nakon tri meseca od ekstrakcije zuba, ugrađena su, po predviđenoj šemi, četiri različita implantata po kvadrantu (n = 32): Mk III TiUnite (Nobel Biocare, Sweden), ITI TPS (Straumann, Switzerland), 3I-Osseotite (Implant Innovation, USA) i XiVE Cell-Plus (Friadent, Germany). Implantati su imedijatno opterećeni fiksnim zubnim nadoknadama, četvoročlanim mostovima od plemenite legure zlato-platina, dva dana posle implantacije. Stabilnost implantata i mogućnost imedijatnog opterećenja ocenjivana je na osnovu analize rezonantnih frekvencija (RFA). Rezultati. Šest meseci nakon implantacije i imedijatnog opterećenja fiksnom zubnom nadoknadom, svi mostovi bili su u funkciji i svi implantati uspešno integrisani, ne pokazujući znake mobilnosti. Sumiranjem dobijenih vrednosti koeficijenta stabilnosti implantata (ISQ) ustanovljeno je da su rezonantne frekvencije bile značajno veće kod implantata u donjoj vilici. Rezultati eksperimentalnog istraživanja pokazali su da su sve analizirane površine ostvarile dobru implantatnu stabilnost. Utvrđen je porast ISQ vrednosti kod svih implantata u mandibuli i delimičan pad ISQ vrednosti za implantate u maksili, nakon šest meseci funkcionalnog opterećenja fiksnim zubnim nadoknadama. Zaključak. Ispitivani endoosealni implantati nisu pokazali različit stepen oseointegracije jer se rezultati merenih parametara hirurških (ISQh) i protetkih (ISQp), nisu statistički značajno razlikovali između implantatnih sistema.",
publisher = "Vojnomedicinska akademija - Institut za naučne informacije, Beograd",
journal = "Vojnosanitetski pregled",
title = "Immediate implant loading with fixed dental restorations: An animal model study, Imedijatno opterećenje implantata fiksnim zubnim nadoknadama - studija na psima",
volume = "69",
number = "2",
pages = "181-189",
doi = "10.2298/VSP1202181S"
}

Špadijer-Gostović, A., Todorović, A., Lazić, V., Todorović, A., Milinković, I.,& Leković, V.. (2012). Immediate implant loading with fixed dental restorations: An animal model study. in Vojnosanitetski pregled
Vojnomedicinska akademija - Institut za naučne informacije, Beograd., 69(2), 181-189.
https://doi.org/10.2298/VSP1202181S

Špadijer-Gostović A, Todorović A, Lazić V, Todorović A, Milinković I, Leković V. Immediate implant loading with fixed dental restorations: An animal model study. in Vojnosanitetski pregled. 2012;69(2):181-189.
doi:10.2298/VSP1202181S .

Špadijer-Gostović, Aleksandra, Todorović, Aleksandar, Lazić, Vojkan, Todorović, Ana, Milinković, Iva, Leković, Vojislav, "Immediate implant loading with fixed dental restorations: An animal model study" in Vojnosanitetski pregled, 69, no. 2 (2012):181-189,
https://doi.org/10.2298/VSP1202181S . .

TY  - JOUR
AU  - Mirković, Nemanja
AU  - Špadijer-Gostović, Aleksandra
AU  - Lazić, Zoran
AU  - Trifković, Branka
PY  - 2012
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1719
AB  - Background/Aim. Fracture toughness determines functional crown strenght and prevents damages on ceramics during mastication. There is a lack of relevant literature data about fracture toughness of crowns made by feather-edge preparation. Mechanical testing of ceramic samples is supposed to show if feather-edge tooth preparation is a successful method for making ceramic crowns without any risk of reduction of their mechanical properties. This research was done to establish effects of feather-edge tooth preparation on fracture toughness of single zirconia ceramic crowns. Methods. The research was performed as an experimental study. Sixty (60) ceramic crowns were made on non-carious extracted human premolars. Thirty (30) crowns were made on the basis of feather-edge preparation (experimental group I). The group II included 30 crowns made on 1 mm rounded shoulder. Crowns fabrication was executed on a copy mill production system 'Zirkonzahn' (Zirkonzahn GMBH, Gais, Germany). The spherical compression test was used to determine fracture toughness, using 6 mm diameter ceramic ball. Fracture load for damaging ceramic crown was recorded on a universal testing machine - Zwick, type 1464, with the speed of 0.05 mm/min. Results. The results of this research introduced significant differences between fracture toughness of ceramic samples in every examined group. However, fracture toughness of crowns from both group was above 2 000 N, what was double beyond a recommended value. The mean value of fracture toughness in the feather-edge group was 2 090 N, and in shoulder group it was 2 214 N. Conclusion. This research showed a high fracture toughness of zirconia crowns made on feather-edge preparation. The examined crowns showed a fracture resistance at a sufficient distance in relation to the minimum values of functional loads. Further research of functional loads of these crown is necessary, as well as research of marginal adaptation of cemented crowns and gingival inflammatory response.
AB  - Uvod/Cilj. Otpornost na lom uslovljava čvrstoću krune u toku funkcionalnih opterećenja i sprečava oštećenje keramike u toku mastikacije. U literaturi nema podataka o otpornosti na lom kruna izrađenih na bazi linijske preparacije. Mehaničkim testiranjem keramičkih uzoraka treba pokazati da li se linijska preparacija zuba može primeniti bez rizika od degradacije mehaničkih osobina keramičkih kruna. Ovo istraživanje sprovedeno je sa ciljem da se utvrdi uticaj linijske preparacije zuba na otpornost na lom pojedinačnih cirkonijumskih keramičkih kruna. Metode. Istraživanje je obavljeno kao eksperimentalna studija. Izrađeno je ukupno 60 keramičkih kruna na nekarioznim ekstrahovanim humanim premolarima. Ukupno 30 kruna izrađeno je na bazi linijske preparacije (prva eksperimentalna grupa), dok je u drugoj grupi izrađeno 30 kruna na osnovu preparacije oblika pravouglog stepenika sa unutrašnjim zaobljenjem. Za izradu kruna korišćen je kopir-frez sistem 'Zirkonzahn' (Zirkonzahn GMBH, Gais, Germany). Za određivanje otpornosti na lom primenjen je test pritiska sa sferičnim opterećenjem - keramičkom kuglom prečnika 6 mm. Sila potrebna da dovede do loma keramičke krune zabeležena je na univerzalnoj mašini za testiranje materijala Zwick, tipa 1464, koja se kretala brzinom od 0,05 mm/min. Rezultati. Rezultati ovog ispitivanja ukazali su na značajne razlike između otpornosti na lom dve ispitivane grupe kruna. Prosečna otpornost na lom obe grupe kruna bila je iznad 2 000 N, što je dvostruko više od preporučene vrednosti. Krune na bazi linijske preparacije imale su prosečnu vrednost otpornosti na lom od 2 090 N, dok je u drugoj grupi otpornost iznosila 2 214 N. Zaključak Eksperimentalnim ispitivanjem utvrđena je visoka otpornost na lom cirkonijumskih keramičkih kruna izrađenih na osnovu linijske preparacije zuba. Ispitivane krune imale su otpornost na lom na dovoljnoj distanci u odnosu na minimalne vrednosti funkcionalnog opterećenja. Neophodna su dalja istraživanja funkcionalnog opterećenja ovakvih kruna u uslovima in vivo kao i ispitivanje rubnog zaptivanja cementiranih kruna i inflamatornog odgovora gingive.
PB  - Vojnomedicinska akademija - Institut za naučne informacije, Beograd
T2  - Vojnosanitetski pregled
T1  - Fracture toughness of zirconia ceramic crowns made by feather-edge tooth preparation design
T1  - Otpornost na lom cirkonijumskih keramičkih kruna izrađenih na bazi linijske preparacije zuba
VL  - 69
IS  - 7
SP  - 562
EP  - 568
DO  - 10.2298/VSP100820004M
ER  - 

@article{
author = "Mirković, Nemanja and Špadijer-Gostović, Aleksandra and Lazić, Zoran and Trifković, Branka",
year = "2012",
abstract = "Background/Aim. Fracture toughness determines functional crown strenght and prevents damages on ceramics during mastication. There is a lack of relevant literature data about fracture toughness of crowns made by feather-edge preparation. Mechanical testing of ceramic samples is supposed to show if feather-edge tooth preparation is a successful method for making ceramic crowns without any risk of reduction of their mechanical properties. This research was done to establish effects of feather-edge tooth preparation on fracture toughness of single zirconia ceramic crowns. Methods. The research was performed as an experimental study. Sixty (60) ceramic crowns were made on non-carious extracted human premolars. Thirty (30) crowns were made on the basis of feather-edge preparation (experimental group I). The group II included 30 crowns made on 1 mm rounded shoulder. Crowns fabrication was executed on a copy mill production system 'Zirkonzahn' (Zirkonzahn GMBH, Gais, Germany). The spherical compression test was used to determine fracture toughness, using 6 mm diameter ceramic ball. Fracture load for damaging ceramic crown was recorded on a universal testing machine - Zwick, type 1464, with the speed of 0.05 mm/min. Results. The results of this research introduced significant differences between fracture toughness of ceramic samples in every examined group. However, fracture toughness of crowns from both group was above 2 000 N, what was double beyond a recommended value. The mean value of fracture toughness in the feather-edge group was 2 090 N, and in shoulder group it was 2 214 N. Conclusion. This research showed a high fracture toughness of zirconia crowns made on feather-edge preparation. The examined crowns showed a fracture resistance at a sufficient distance in relation to the minimum values of functional loads. Further research of functional loads of these crown is necessary, as well as research of marginal adaptation of cemented crowns and gingival inflammatory response., Uvod/Cilj. Otpornost na lom uslovljava čvrstoću krune u toku funkcionalnih opterećenja i sprečava oštećenje keramike u toku mastikacije. U literaturi nema podataka o otpornosti na lom kruna izrađenih na bazi linijske preparacije. Mehaničkim testiranjem keramičkih uzoraka treba pokazati da li se linijska preparacija zuba može primeniti bez rizika od degradacije mehaničkih osobina keramičkih kruna. Ovo istraživanje sprovedeno je sa ciljem da se utvrdi uticaj linijske preparacije zuba na otpornost na lom pojedinačnih cirkonijumskih keramičkih kruna. Metode. Istraživanje je obavljeno kao eksperimentalna studija. Izrađeno je ukupno 60 keramičkih kruna na nekarioznim ekstrahovanim humanim premolarima. Ukupno 30 kruna izrađeno je na bazi linijske preparacije (prva eksperimentalna grupa), dok je u drugoj grupi izrađeno 30 kruna na osnovu preparacije oblika pravouglog stepenika sa unutrašnjim zaobljenjem. Za izradu kruna korišćen je kopir-frez sistem 'Zirkonzahn' (Zirkonzahn GMBH, Gais, Germany). Za određivanje otpornosti na lom primenjen je test pritiska sa sferičnim opterećenjem - keramičkom kuglom prečnika 6 mm. Sila potrebna da dovede do loma keramičke krune zabeležena je na univerzalnoj mašini za testiranje materijala Zwick, tipa 1464, koja se kretala brzinom od 0,05 mm/min. Rezultati. Rezultati ovog ispitivanja ukazali su na značajne razlike između otpornosti na lom dve ispitivane grupe kruna. Prosečna otpornost na lom obe grupe kruna bila je iznad 2 000 N, što je dvostruko više od preporučene vrednosti. Krune na bazi linijske preparacije imale su prosečnu vrednost otpornosti na lom od 2 090 N, dok je u drugoj grupi otpornost iznosila 2 214 N. Zaključak Eksperimentalnim ispitivanjem utvrđena je visoka otpornost na lom cirkonijumskih keramičkih kruna izrađenih na osnovu linijske preparacije zuba. Ispitivane krune imale su otpornost na lom na dovoljnoj distanci u odnosu na minimalne vrednosti funkcionalnog opterećenja. Neophodna su dalja istraživanja funkcionalnog opterećenja ovakvih kruna u uslovima in vivo kao i ispitivanje rubnog zaptivanja cementiranih kruna i inflamatornog odgovora gingive.",
publisher = "Vojnomedicinska akademija - Institut za naučne informacije, Beograd",
journal = "Vojnosanitetski pregled",
title = "Fracture toughness of zirconia ceramic crowns made by feather-edge tooth preparation design, Otpornost na lom cirkonijumskih keramičkih kruna izrađenih na bazi linijske preparacije zuba",
volume = "69",
number = "7",
pages = "562-568",
doi = "10.2298/VSP100820004M"
}

Mirković, N., Špadijer-Gostović, A., Lazić, Z.,& Trifković, B.. (2012). Fracture toughness of zirconia ceramic crowns made by feather-edge tooth preparation design. in Vojnosanitetski pregled
Vojnomedicinska akademija - Institut za naučne informacije, Beograd., 69(7), 562-568.
https://doi.org/10.2298/VSP100820004M

Mirković N, Špadijer-Gostović A, Lazić Z, Trifković B. Fracture toughness of zirconia ceramic crowns made by feather-edge tooth preparation design. in Vojnosanitetski pregled. 2012;69(7):562-568.
doi:10.2298/VSP100820004M .

Mirković, Nemanja, Špadijer-Gostović, Aleksandra, Lazić, Zoran, Trifković, Branka, "Fracture toughness of zirconia ceramic crowns made by feather-edge tooth preparation design" in Vojnosanitetski pregled, 69, no. 7 (2012):562-568,
https://doi.org/10.2298/VSP100820004M . .

TY  - JOUR
AU  - Weinlaender, Michael
AU  - Leković, Vojislav
AU  - Špadijer-Gostović, Aleksandra
AU  - Miličić, Biljana
AU  - Wegscheider, Walther A.
AU  - Piehslinger, Eva
PY  - 2011
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1619
AB  - Objectives: The aim of this study was to evaluate soft tissue development at concave circular macro-grooved titanium abutments in healed sites. Material and methods: In a split-mouth pilot study 10 patients received two implants each at healed posterior sites in contralateral maxillary or mandibular jaw quadrants. Either circular macro-grooved concave study abutments or conventional convex control abutments were immediately provisionalized and received permanent crowns 3 months postimplantation. Marginal bone level, papilla index, modified plaque and bleeding index were recorded. The esthetic outcome was evaluated with standardized perpendicular pictures according to the Pink Esthetic Score (PES). Statistical analysis included the description of all variables by mean value, standard deviation and range. PES values were compared using the Wilcoxon signed rank test for paired data. Results: Cumulative survival rate for all 20 implants was 100%. At the 1-year follow up, there was no statistical significant difference of marginal bone levels between sites restored with the study (-0.11 +/- 0.77 mm) vs. the control (-0.34 +/- 0.53 mm) abutments (P>0.05). Esthetic evaluation (PES) revealed statistically significant differences in scores between the study group [study abutment group] (7.2 +/- 2.82, 8 +/- 1.89) and the control group [control abutment group] (9.5 +/- 1.58, 10.5 +/- 1.72) at the time of prosthetic delivery and the 1-year follow-up. Whereas PES scores for mesial papilla at control sites at the 1-year follow-up demonstrated statistically significant higher values, both soft tissue level and soft tissue contour at control sites revealed statistically significantly higher PES values (P lt 0.05) at time of prosthetic delivery and at 1-year follow-up when compared with study sites. Conclusions: Concave macro-grooved abutments in healed posterior maxillary and mandibular sites did not exhibit a superior soft tissue development compared with standard convex abutments.
PB  - Wiley, Hoboken
T2  - Clinical Oral Implants Research
T1  - Soft tissue development around abutments with a circular macro-groove in healed sites of partially edentulous posterior maxillae and mandibles: a clinical pilot study
VL  - 22
IS  - 7
SP  - 743
EP  - 752
DO  - 10.1111/j.1600-0501.2010.02054.x
ER  - 

@article{
author = "Weinlaender, Michael and Leković, Vojislav and Špadijer-Gostović, Aleksandra and Miličić, Biljana and Wegscheider, Walther A. and Piehslinger, Eva",
year = "2011",
abstract = "Objectives: The aim of this study was to evaluate soft tissue development at concave circular macro-grooved titanium abutments in healed sites. Material and methods: In a split-mouth pilot study 10 patients received two implants each at healed posterior sites in contralateral maxillary or mandibular jaw quadrants. Either circular macro-grooved concave study abutments or conventional convex control abutments were immediately provisionalized and received permanent crowns 3 months postimplantation. Marginal bone level, papilla index, modified plaque and bleeding index were recorded. The esthetic outcome was evaluated with standardized perpendicular pictures according to the Pink Esthetic Score (PES). Statistical analysis included the description of all variables by mean value, standard deviation and range. PES values were compared using the Wilcoxon signed rank test for paired data. Results: Cumulative survival rate for all 20 implants was 100%. At the 1-year follow up, there was no statistical significant difference of marginal bone levels between sites restored with the study (-0.11 +/- 0.77 mm) vs. the control (-0.34 +/- 0.53 mm) abutments (P>0.05). Esthetic evaluation (PES) revealed statistically significant differences in scores between the study group [study abutment group] (7.2 +/- 2.82, 8 +/- 1.89) and the control group [control abutment group] (9.5 +/- 1.58, 10.5 +/- 1.72) at the time of prosthetic delivery and the 1-year follow-up. Whereas PES scores for mesial papilla at control sites at the 1-year follow-up demonstrated statistically significant higher values, both soft tissue level and soft tissue contour at control sites revealed statistically significantly higher PES values (P lt 0.05) at time of prosthetic delivery and at 1-year follow-up when compared with study sites. Conclusions: Concave macro-grooved abutments in healed posterior maxillary and mandibular sites did not exhibit a superior soft tissue development compared with standard convex abutments.",
publisher = "Wiley, Hoboken",
journal = "Clinical Oral Implants Research",
title = "Soft tissue development around abutments with a circular macro-groove in healed sites of partially edentulous posterior maxillae and mandibles: a clinical pilot study",
volume = "22",
number = "7",
pages = "743-752",
doi = "10.1111/j.1600-0501.2010.02054.x"
}

Weinlaender, M., Leković, V., Špadijer-Gostović, A., Miličić, B., Wegscheider, W. A.,& Piehslinger, E.. (2011). Soft tissue development around abutments with a circular macro-groove in healed sites of partially edentulous posterior maxillae and mandibles: a clinical pilot study. in Clinical Oral Implants Research
Wiley, Hoboken., 22(7), 743-752.
https://doi.org/10.1111/j.1600-0501.2010.02054.x

Weinlaender M, Leković V, Špadijer-Gostović A, Miličić B, Wegscheider WA, Piehslinger E. Soft tissue development around abutments with a circular macro-groove in healed sites of partially edentulous posterior maxillae and mandibles: a clinical pilot study. in Clinical Oral Implants Research. 2011;22(7):743-752.
doi:10.1111/j.1600-0501.2010.02054.x .

Weinlaender, Michael, Leković, Vojislav, Špadijer-Gostović, Aleksandra, Miličić, Biljana, Wegscheider, Walther A., Piehslinger, Eva, "Soft tissue development around abutments with a circular macro-groove in healed sites of partially edentulous posterior maxillae and mandibles: a clinical pilot study" in Clinical Oral Implants Research, 22, no. 7 (2011):743-752,
https://doi.org/10.1111/j.1600-0501.2010.02054.x . .

TY  - THES
AU  - Špadijer-Gostović, Aleksandra
PY  - 2011
UR  - https://plus.sr.cobiss.net/opac7/bib/38644751
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/516
PB  - Univerzitet u Beogradu, Stomatološki fakultet
T1  - Gingivomorfometrijska analiza u implantološkoj terapiji fiksnim zubnim nadoknadama
UR  - https://hdl.handle.net/21.15107/rcub_smile_516
ER  - 

@phdthesis{
author = "Špadijer-Gostović, Aleksandra",
year = "2011",
publisher = "Univerzitet u Beogradu, Stomatološki fakultet",
title = "Gingivomorfometrijska analiza u implantološkoj terapiji fiksnim zubnim nadoknadama",
url = "https://hdl.handle.net/21.15107/rcub_smile_516"
}

Špadijer-Gostović, A.. (2011). Gingivomorfometrijska analiza u implantološkoj terapiji fiksnim zubnim nadoknadama. 
Univerzitet u Beogradu, Stomatološki fakultet..
https://hdl.handle.net/21.15107/rcub_smile_516

Špadijer-Gostović A. Gingivomorfometrijska analiza u implantološkoj terapiji fiksnim zubnim nadoknadama. 2011;.
https://hdl.handle.net/21.15107/rcub_smile_516 .

Špadijer-Gostović, Aleksandra, "Gingivomorfometrijska analiza u implantološkoj terapiji fiksnim zubnim nadoknadama" (2011),
https://hdl.handle.net/21.15107/rcub_smile_516 .

TY  - JOUR
AU  - Todorović, Aleksandar
AU  - Lisjak, Dejan
AU  - Lazić, Vojkan
AU  - Špadijer-Gostović, Aleksandra
PY  - 2010
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1524
AB  - Introduction. Modern technologies offer a range of benefits and significantly improve specific therapeutic procedures in dentistry. However, despite gaining experience and training there are still some mistakes in their implementation. The aim of this study was to describe the most common errors during intraoral scanning, 'optical impression' procedure, during CAD-CAM technology for production of dental restorations. Material and Methods. Cerec® 3D CAD-CAM system for one visit tooth reconstruction by inlays, onlays, endocrowns, half and complete crowns and veneers from the ceramic material was used in the study. Results. Analysis included 1564 reconstruction during 5 years. The most common causes of errors performing optical impression were the result of: improper preparation of teeth, the instability of the scanner in the mouth of the patient, incorrect position and angle of the scanner to the object scanning, contrast spray applied in uneven layer, the presence of fluid in the region scan, the presence of artifacts in the region gingival sulcus. Conclusion. Optical impression is faster procedure than conventional impression, but technologically sensitive. The most frequent errors are: improper handling of the scanner, inadequate tooth preparation, irregular powder application on the tooth and irregular use in the gingival sulcus.
AB  - Uvod. Savremene tehnologije u stomatologiji imaju niz prednosti i značajno unapređuju pojedine terapijske postupke. Međutim, i pored sticanja i usavršavanja određenih iskustava, javljaju se greške u njihovoj primeni. Cilj rada je bio da se prikažu najčešće greške prilikom postupka optičkog intraoralnog skeniranja (tzv. otiskivanja) kod CAD-CAM tehnologije izrade zubnih nadoknada. Materijal i metode rada. U radu je korišćen Cerec ® 3D CAD-CAM sistem za jednoseansnu rekonstrukciji zuba izradom inleja, onleja, endokruna, delimičnih i celih kruna, venira, najčešće izrađenih od keramičkih materijala. Rezultati. Analiza je obuhvatila 1.564 restauracije tokom petogodišnjeg rada. Najčešći uzroci grešaka kod optičkog otiskivanja bili su posledica nepravilne preparacije zuba, nestabilnosti skenera u ustima pacijenta, nepravilna pozicija i ugao skenera u odnosu na objekat snimanja, kontrastni sprej nanesen u neravnomernom sloju, zastupljenost tečnosti u regionu skeniranja i artefakta u regionu gingivalnog sulkusa. Zaključak. Optičko intraoralno skeniranje je jednostavniji i brži princip otiskivanja od konvencionalnog postupka, ali je tehnološki osetljiviji. Najčešće greške prilikom optičkog otiskivanja su: nepravilno rukovanje skenerom, neadekvatna priprema zuba, nepravilno nanošenje praha za matiranje površina i nepravilna priprema regiona gingivalnog sulkusa.
PB  - Srpsko lekarsko društvo - Stomatološka sekcija, Beograd
T2  - Stomatološki glasnik Srbije
T1  - Possible errors during the optical impression procedure
T1  - Moguće greške prilikom intraoralnog optičkog otiskivanja
VL  - 57
IS  - 1
SP  - 30
EP  - 37
DO  - 10.2298/SGS1001030T
ER  - 

@article{
author = "Todorović, Aleksandar and Lisjak, Dejan and Lazić, Vojkan and Špadijer-Gostović, Aleksandra",
year = "2010",
abstract = "Introduction. Modern technologies offer a range of benefits and significantly improve specific therapeutic procedures in dentistry. However, despite gaining experience and training there are still some mistakes in their implementation. The aim of this study was to describe the most common errors during intraoral scanning, 'optical impression' procedure, during CAD-CAM technology for production of dental restorations. Material and Methods. Cerec® 3D CAD-CAM system for one visit tooth reconstruction by inlays, onlays, endocrowns, half and complete crowns and veneers from the ceramic material was used in the study. Results. Analysis included 1564 reconstruction during 5 years. The most common causes of errors performing optical impression were the result of: improper preparation of teeth, the instability of the scanner in the mouth of the patient, incorrect position and angle of the scanner to the object scanning, contrast spray applied in uneven layer, the presence of fluid in the region scan, the presence of artifacts in the region gingival sulcus. Conclusion. Optical impression is faster procedure than conventional impression, but technologically sensitive. The most frequent errors are: improper handling of the scanner, inadequate tooth preparation, irregular powder application on the tooth and irregular use in the gingival sulcus., Uvod. Savremene tehnologije u stomatologiji imaju niz prednosti i značajno unapređuju pojedine terapijske postupke. Međutim, i pored sticanja i usavršavanja određenih iskustava, javljaju se greške u njihovoj primeni. Cilj rada je bio da se prikažu najčešće greške prilikom postupka optičkog intraoralnog skeniranja (tzv. otiskivanja) kod CAD-CAM tehnologije izrade zubnih nadoknada. Materijal i metode rada. U radu je korišćen Cerec ® 3D CAD-CAM sistem za jednoseansnu rekonstrukciji zuba izradom inleja, onleja, endokruna, delimičnih i celih kruna, venira, najčešće izrađenih od keramičkih materijala. Rezultati. Analiza je obuhvatila 1.564 restauracije tokom petogodišnjeg rada. Najčešći uzroci grešaka kod optičkog otiskivanja bili su posledica nepravilne preparacije zuba, nestabilnosti skenera u ustima pacijenta, nepravilna pozicija i ugao skenera u odnosu na objekat snimanja, kontrastni sprej nanesen u neravnomernom sloju, zastupljenost tečnosti u regionu skeniranja i artefakta u regionu gingivalnog sulkusa. Zaključak. Optičko intraoralno skeniranje je jednostavniji i brži princip otiskivanja od konvencionalnog postupka, ali je tehnološki osetljiviji. Najčešće greške prilikom optičkog otiskivanja su: nepravilno rukovanje skenerom, neadekvatna priprema zuba, nepravilno nanošenje praha za matiranje površina i nepravilna priprema regiona gingivalnog sulkusa.",
publisher = "Srpsko lekarsko društvo - Stomatološka sekcija, Beograd",
journal = "Stomatološki glasnik Srbije",
title = "Possible errors during the optical impression procedure, Moguće greške prilikom intraoralnog optičkog otiskivanja",
volume = "57",
number = "1",
pages = "30-37",
doi = "10.2298/SGS1001030T"
}

Todorović, A., Lisjak, D., Lazić, V.,& Špadijer-Gostović, A.. (2010). Possible errors during the optical impression procedure. in Stomatološki glasnik Srbije
Srpsko lekarsko društvo - Stomatološka sekcija, Beograd., 57(1), 30-37.
https://doi.org/10.2298/SGS1001030T

Todorović A, Lisjak D, Lazić V, Špadijer-Gostović A. Possible errors during the optical impression procedure. in Stomatološki glasnik Srbije. 2010;57(1):30-37.
doi:10.2298/SGS1001030T .

Todorović, Aleksandar, Lisjak, Dejan, Lazić, Vojkan, Špadijer-Gostović, Aleksandra, "Possible errors during the optical impression procedure" in Stomatološki glasnik Srbije, 57, no. 1 (2010):30-37,
https://doi.org/10.2298/SGS1001030T . .

TY  - JOUR
AU  - Weinlaender, Michael
AU  - Leković, Vojislav
AU  - Špadijer-Gostović, Aleksandra
AU  - Miličić, Biljana
AU  - Krennmair, Gerald
AU  - Plenk, Hanns, Jr.
PY  - 2009
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1490
AB  - Objectives: A new method is introduced for the esthetic evaluation of the periimplant mucogingival complex through collection of standardized oral photographs and computer-assisted measurement of reproducible data. Using this method, different soft tissue and crown parameters in the dentogingival complex can be measured and the esthetic outcome monitored. Material and methods: A photographic device for standardized oral photography and a standard protocol for the esthetic evaluation of the crown-mucogingival complex is presented, comprising six soft tissue parameters: (1) mesial and (2) distal papilla areas, (3) mesial and (4) distal papilla heights, (5) soft tissue-crown perimeter, and (6) gingival recession. In order to demonstrate the reproducibility of standardized oral photographs and the accuracy of the measurement of the six parameters, the data obtained in each of two such standardized clinical photographs, taken at 10-14 days intervals, of the anterior maxillary region from 10 patients with no apparent dental disease were compared. For the statistical analysis of the reproducibility of these dependent data the 95% confidence interval and the coefficients of variation were calculated from measurement means and ranges of each of the above parameters, pooled from all 10 patients. Results: Statistical analysis revealed high reproducibility with no significant differences between the range of mean values of all six parameter measurements on the first and second standardized oral photograph of the same patient, respectively. Conclusion: Gingivomorphometry on standardized oral photographs can be considered to be an accurate and reproducible method for the evaluation and measurement of different dentogingival and periimplant parameters.
PB  - Wiley, Hoboken
T2  - Clinical Oral Implants Research
T1  - Gingivomorphometry - esthetic evaluation of the crown-mucogingival complex: a new method for collection and measurement of standardized and reproducible data in oral photography
VL  - 20
IS  - 5
SP  - 526
EP  - 530
DO  - 10.1111/j.1600-0501.2008.01685.x
ER  - 

@article{
author = "Weinlaender, Michael and Leković, Vojislav and Špadijer-Gostović, Aleksandra and Miličić, Biljana and Krennmair, Gerald and Plenk, Hanns, Jr.",
year = "2009",
abstract = "Objectives: A new method is introduced for the esthetic evaluation of the periimplant mucogingival complex through collection of standardized oral photographs and computer-assisted measurement of reproducible data. Using this method, different soft tissue and crown parameters in the dentogingival complex can be measured and the esthetic outcome monitored. Material and methods: A photographic device for standardized oral photography and a standard protocol for the esthetic evaluation of the crown-mucogingival complex is presented, comprising six soft tissue parameters: (1) mesial and (2) distal papilla areas, (3) mesial and (4) distal papilla heights, (5) soft tissue-crown perimeter, and (6) gingival recession. In order to demonstrate the reproducibility of standardized oral photographs and the accuracy of the measurement of the six parameters, the data obtained in each of two such standardized clinical photographs, taken at 10-14 days intervals, of the anterior maxillary region from 10 patients with no apparent dental disease were compared. For the statistical analysis of the reproducibility of these dependent data the 95% confidence interval and the coefficients of variation were calculated from measurement means and ranges of each of the above parameters, pooled from all 10 patients. Results: Statistical analysis revealed high reproducibility with no significant differences between the range of mean values of all six parameter measurements on the first and second standardized oral photograph of the same patient, respectively. Conclusion: Gingivomorphometry on standardized oral photographs can be considered to be an accurate and reproducible method for the evaluation and measurement of different dentogingival and periimplant parameters.",
publisher = "Wiley, Hoboken",
journal = "Clinical Oral Implants Research",
title = "Gingivomorphometry - esthetic evaluation of the crown-mucogingival complex: a new method for collection and measurement of standardized and reproducible data in oral photography",
volume = "20",
number = "5",
pages = "526-530",
doi = "10.1111/j.1600-0501.2008.01685.x"
}

Weinlaender, M., Leković, V., Špadijer-Gostović, A., Miličić, B., Krennmair, G.,& Plenk, H. Jr.. (2009). Gingivomorphometry - esthetic evaluation of the crown-mucogingival complex: a new method for collection and measurement of standardized and reproducible data in oral photography. in Clinical Oral Implants Research
Wiley, Hoboken., 20(5), 526-530.
https://doi.org/10.1111/j.1600-0501.2008.01685.x

Weinlaender M, Leković V, Špadijer-Gostović A, Miličić B, Krennmair G, Plenk HJ. Gingivomorphometry - esthetic evaluation of the crown-mucogingival complex: a new method for collection and measurement of standardized and reproducible data in oral photography. in Clinical Oral Implants Research. 2009;20(5):526-530.
doi:10.1111/j.1600-0501.2008.01685.x .

Weinlaender, Michael, Leković, Vojislav, Špadijer-Gostović, Aleksandra, Miličić, Biljana, Krennmair, Gerald, Plenk, Hanns, Jr., "Gingivomorphometry - esthetic evaluation of the crown-mucogingival complex: a new method for collection and measurement of standardized and reproducible data in oral photography" in Clinical Oral Implants Research, 20, no. 5 (2009):526-530,
https://doi.org/10.1111/j.1600-0501.2008.01685.x . .

TY  - JOUR
AU  - Špadijer, Aleksandra
PY  - 2005
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1255
AB  - The most important prerequisite for successful osseointegration is achievement and maintenance of implant stability. Recent clinical findings have demonstrated that only implants with high primary stability can be subjected to immediate loading protocol with predictable result. The purpose of this in vivo study was: (1) to determine the changes in implant stability after 6 months of functional loading by using RFA; (2) to evaluate implant stability of 4 implant systems utilizing different techniques for preparing surface roughness; and (3) to compare the results of RFA measurements with histomorphometrical data. 2 mongrel dogs were edentulated bilaterally in the mandibular and maxillary premolar areas. After 3 months, implants were placed in a pattern, 4 different implants per quadrant (n=32): (1) Mk III (RP), TiUnite, Nobel Biocare, Sweden D-3.75, L-10; (2) ITI-Screw, ITI TPS, Straumann, Switzerland D-4.1, L-10; (3) 3I-Osseotite, Implant Innovation, USA D-3.75, L-10; and (4) XiVE, Cell-Plus, Friadent, Germany D-3.4, L-11. Implants were subjected to immediate loading with 4 unit gold cast bridges (3-5days post implantation). Resonance Frequency Analysis - RFA, (Osstelltm, Integration Diagnostics, Sävedalen, Sweden) was used for measurement of implant stability after insertion, as ISQ surgical, and 6 months later, as ISQ prosthetic. Histomorphometrical evaluation - BIC%, the percentage of implant to bone contacts were quantified in the defined zone of interest (total peri-implant area) by computer assisted histomorphometry. In this experimental setting, all evaluated surfaces achieved a good bone-to-implant contact and implant stability. The study demonstrated no statistically significant difference in implant stability and amount of bone-to-implant contact between implant systems utilizing different techniques for preparing surface roughness. Decrease or increase of ISQ values were not always correspondent to histomorphometrical data.
PB  - Udruženje stomatologa Balkana
T2  - Balkan Journal of Stomatology
T1  - The applicability of Resonance Frequency Analysis (RFA) in evaluation implant stability
VL  - 9
IS  - 2
SP  - 91
EP  - 96
UR  - https://hdl.handle.net/21.15107/rcub_smile_1255
ER  - 

@article{
author = "Špadijer, Aleksandra",
year = "2005",
abstract = "The most important prerequisite for successful osseointegration is achievement and maintenance of implant stability. Recent clinical findings have demonstrated that only implants with high primary stability can be subjected to immediate loading protocol with predictable result. The purpose of this in vivo study was: (1) to determine the changes in implant stability after 6 months of functional loading by using RFA; (2) to evaluate implant stability of 4 implant systems utilizing different techniques for preparing surface roughness; and (3) to compare the results of RFA measurements with histomorphometrical data. 2 mongrel dogs were edentulated bilaterally in the mandibular and maxillary premolar areas. After 3 months, implants were placed in a pattern, 4 different implants per quadrant (n=32): (1) Mk III (RP), TiUnite, Nobel Biocare, Sweden D-3.75, L-10; (2) ITI-Screw, ITI TPS, Straumann, Switzerland D-4.1, L-10; (3) 3I-Osseotite, Implant Innovation, USA D-3.75, L-10; and (4) XiVE, Cell-Plus, Friadent, Germany D-3.4, L-11. Implants were subjected to immediate loading with 4 unit gold cast bridges (3-5days post implantation). Resonance Frequency Analysis - RFA, (Osstelltm, Integration Diagnostics, Sävedalen, Sweden) was used for measurement of implant stability after insertion, as ISQ surgical, and 6 months later, as ISQ prosthetic. Histomorphometrical evaluation - BIC%, the percentage of implant to bone contacts were quantified in the defined zone of interest (total peri-implant area) by computer assisted histomorphometry. In this experimental setting, all evaluated surfaces achieved a good bone-to-implant contact and implant stability. The study demonstrated no statistically significant difference in implant stability and amount of bone-to-implant contact between implant systems utilizing different techniques for preparing surface roughness. Decrease or increase of ISQ values were not always correspondent to histomorphometrical data.",
publisher = "Udruženje stomatologa Balkana",
journal = "Balkan Journal of Stomatology",
title = "The applicability of Resonance Frequency Analysis (RFA) in evaluation implant stability",
volume = "9",
number = "2",
pages = "91-96",
url = "https://hdl.handle.net/21.15107/rcub_smile_1255"
}

Špadijer, A.. (2005). The applicability of Resonance Frequency Analysis (RFA) in evaluation implant stability. in Balkan Journal of Stomatology
Udruženje stomatologa Balkana., 9(2), 91-96.
https://hdl.handle.net/21.15107/rcub_smile_1255

Špadijer A. The applicability of Resonance Frequency Analysis (RFA) in evaluation implant stability. in Balkan Journal of Stomatology. 2005;9(2):91-96.
https://hdl.handle.net/21.15107/rcub_smile_1255 .

Špadijer, Aleksandra, "The applicability of Resonance Frequency Analysis (RFA) in evaluation implant stability" in Balkan Journal of Stomatology, 9, no. 2 (2005):91-96,
https://hdl.handle.net/21.15107/rcub_smile_1255 .

TY  - THES
AU  - Špadijer-Gostović, Aleksandra
PY  - 2005
UR  - https://plus.sr.cobiss.net/opac7/bib/1024164494
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/412
PB  - Univerzitet u Beogradu, Stomatološki fakultet
T1  - Biološki odgovor tkiva na endoosealne implantate opterećene fiksnim zubnim nadoknadama
UR  - https://hdl.handle.net/21.15107/rcub_smile_412
ER  - 

@mastersthesis{
author = "Špadijer-Gostović, Aleksandra",
year = "2005",
publisher = "Univerzitet u Beogradu, Stomatološki fakultet",
title = "Biološki odgovor tkiva na endoosealne implantate opterećene fiksnim zubnim nadoknadama",
url = "https://hdl.handle.net/21.15107/rcub_smile_412"
}

Špadijer-Gostović, A.. (2005). Biološki odgovor tkiva na endoosealne implantate opterećene fiksnim zubnim nadoknadama. 
Univerzitet u Beogradu, Stomatološki fakultet..
https://hdl.handle.net/21.15107/rcub_smile_412

Špadijer-Gostović A. Biološki odgovor tkiva na endoosealne implantate opterećene fiksnim zubnim nadoknadama. 2005;.
https://hdl.handle.net/21.15107/rcub_smile_412 .

Špadijer-Gostović, Aleksandra, "Biološki odgovor tkiva na endoosealne implantate opterećene fiksnim zubnim nadoknadama" (2005),
https://hdl.handle.net/21.15107/rcub_smile_412 .

TY  - JOUR
AU  - Todorović, Aleksandar
AU  - Vulićević, Zoran
AU  - Špadijer, Aleksandra
PY  - 2004
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1194
AB  - Perfect temporary care guarantees us the complete trust of our patients. From a chemical standpoint Luxatemp or Acrytemp can be classified as bis-acrylic materials. This class of materials has numerous advantages that give us many possibilities for successful clinical use: compatibility with the pulp, lowest setting temperatures, good flexural strength, low shrinkage and high abrasion resistance. The purpose of this paper is to present method of fabrication fixed provisional restorations using a vacuum formed tray matrix with new generation of temporary materials.
AB  - Adekvatno izrađene privremene nadoknade nam obezbeđuju između ostalog i sticanje pacijentovog poverenja. Luxatemp ili Acrytemp pripadaju grupi bis-akrilatnih kompozita. Ovi materijali imaju brojne prednosti: kompatibilnost sa pulpo-dentinskim kompleksom, nisku temperaturu polimerizacije, dobru otpornost na savijanje, malu kontrakciju i dobru otpornost na abraziju. Cilj ovog rada je bio da prikaže kombinovanu metodu izrade privremenih mostova upotrebom transparentnih plastičnih kalupa u kombinaciji sa novom generacijom materijala za izradu privremenih nadoknada.
PB  - Udruženje stomatologa Srbije i Crne Gore - Sekcija za stomatološku protetiku, Beograd
T2  - Stomatološka protetika
T1  - Temporary care in focus-temporary bridges
T1  - Kombinovana metoda izrade privremenih mostova
VL  - 3
IS  - 1
SP  - 21
EP  - 25
UR  - https://hdl.handle.net/21.15107/rcub_smile_1194
ER  - 

@article{
author = "Todorović, Aleksandar and Vulićević, Zoran and Špadijer, Aleksandra",
year = "2004",
abstract = "Perfect temporary care guarantees us the complete trust of our patients. From a chemical standpoint Luxatemp or Acrytemp can be classified as bis-acrylic materials. This class of materials has numerous advantages that give us many possibilities for successful clinical use: compatibility with the pulp, lowest setting temperatures, good flexural strength, low shrinkage and high abrasion resistance. The purpose of this paper is to present method of fabrication fixed provisional restorations using a vacuum formed tray matrix with new generation of temporary materials., Adekvatno izrađene privremene nadoknade nam obezbeđuju između ostalog i sticanje pacijentovog poverenja. Luxatemp ili Acrytemp pripadaju grupi bis-akrilatnih kompozita. Ovi materijali imaju brojne prednosti: kompatibilnost sa pulpo-dentinskim kompleksom, nisku temperaturu polimerizacije, dobru otpornost na savijanje, malu kontrakciju i dobru otpornost na abraziju. Cilj ovog rada je bio da prikaže kombinovanu metodu izrade privremenih mostova upotrebom transparentnih plastičnih kalupa u kombinaciji sa novom generacijom materijala za izradu privremenih nadoknada.",
publisher = "Udruženje stomatologa Srbije i Crne Gore - Sekcija za stomatološku protetiku, Beograd",
journal = "Stomatološka protetika",
title = "Temporary care in focus-temporary bridges, Kombinovana metoda izrade privremenih mostova",
volume = "3",
number = "1",
pages = "21-25",
url = "https://hdl.handle.net/21.15107/rcub_smile_1194"
}

Todorović, A., Vulićević, Z.,& Špadijer, A.. (2004). Temporary care in focus-temporary bridges. in Stomatološka protetika
Udruženje stomatologa Srbije i Crne Gore - Sekcija za stomatološku protetiku, Beograd., 3(1), 21-25.
https://hdl.handle.net/21.15107/rcub_smile_1194

Todorović A, Vulićević Z, Špadijer A. Temporary care in focus-temporary bridges. in Stomatološka protetika. 2004;3(1):21-25.
https://hdl.handle.net/21.15107/rcub_smile_1194 .

Todorović, Aleksandar, Vulićević, Zoran, Špadijer, Aleksandra, "Temporary care in focus-temporary bridges" in Stomatološka protetika, 3, no. 1 (2004):21-25,
https://hdl.handle.net/21.15107/rcub_smile_1194 .