Cvijović-Alagić, Ivana

Link to this page

Authority KeyName Variants
orcid::0000-0002-3554-4003
  • Cvijović-Alagić, Ivana (6)
Projects

Author's Bibliography

Laser surface modification of metallic implant materials

Laketić, Slađana; Rakin, Marko; Čairović, Aleksandra; Maksimović, Vesna; Cvijović-Alagić, Ivana

(Srpsko lekarsko društvo, Beograd, 2019)

TY  - JOUR
AU  - Laketić, Slađana
AU  - Rakin, Marko
AU  - Čairović, Aleksandra
AU  - Maksimović, Vesna
AU  - Cvijović-Alagić, Ivana
PY  - 2019
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/2460
AB  - Metallic biomaterials are most commonly used as hard-tissue replacements because of their favorable mechanical features and excellent biocompatibility. The objective of this paper is to present an overview of diverse surface modification techniques, with a special emphasis on the laser surface modification method, as well as diverse characterization techniques used for investigating the impact of the surface modification process on metallic implant materials' properties. Moreover, the effect of laser radiation on the surface its and mechanical characteristics, as well as on the structure of metallic bioimplants, is presented. The study of influence of high-intensity laser radiation on metallic materials' surface includes primarily investigations of the surface morphology modifications and specific surface structure formation since their presence enables enhanced osseointegration.
AB  - Metalni biomaterijali se najčešće koriste za izradu implantanata čvrstih strukturnih delova ljudskog tela zbog svojih dobrih mehaničkih karakteristika i odlične biokompatibilnosti. Cilj rada je da se pregledno predstave različite tehnike površinske modifikacije implantantnih materijala sa posebnim osvrtom na metodu laserske modifikacije površine, kao i mnogobrojne karakterizacione metode za ispitivanje uticaja procesa površinske modifikacije na svojstva metalnih implantantnih materijala. Osim toga, predstavljen je i razmatran uticaj laserskog zračenja na površinske i mehaničke karakteristike, kao i na strukturu metalnih bioimplantanata. Ispitivanje uticaja laserskog zračenja visokog intenziteta na površinu metalnih materijala prvenstveno obuhvata ispitivanje morfoloških površinskih promena i formiranja specifičnih površinskih struktura, koje doprinose poboljšanju oseointegracije metalnih implantanata.
PB  - Srpsko lekarsko društvo, Beograd
T2  - Srpski arhiv za celokupno lekarstvo
T1  - Laser surface modification of metallic implant materials
T1  - Laserska površinska modifikacija metalnih implantantnih materijala
VL  - 147
IS  - 7-8
SP  - 497
EP  - 501
DO  - 10.2298/SARH181126054L
ER  - 
@article{
author = "Laketić, Slađana and Rakin, Marko and Čairović, Aleksandra and Maksimović, Vesna and Cvijović-Alagić, Ivana",
year = "2019",
abstract = "Metallic biomaterials are most commonly used as hard-tissue replacements because of their favorable mechanical features and excellent biocompatibility. The objective of this paper is to present an overview of diverse surface modification techniques, with a special emphasis on the laser surface modification method, as well as diverse characterization techniques used for investigating the impact of the surface modification process on metallic implant materials' properties. Moreover, the effect of laser radiation on the surface its and mechanical characteristics, as well as on the structure of metallic bioimplants, is presented. The study of influence of high-intensity laser radiation on metallic materials' surface includes primarily investigations of the surface morphology modifications and specific surface structure formation since their presence enables enhanced osseointegration., Metalni biomaterijali se najčešće koriste za izradu implantanata čvrstih strukturnih delova ljudskog tela zbog svojih dobrih mehaničkih karakteristika i odlične biokompatibilnosti. Cilj rada je da se pregledno predstave različite tehnike površinske modifikacije implantantnih materijala sa posebnim osvrtom na metodu laserske modifikacije površine, kao i mnogobrojne karakterizacione metode za ispitivanje uticaja procesa površinske modifikacije na svojstva metalnih implantantnih materijala. Osim toga, predstavljen je i razmatran uticaj laserskog zračenja na površinske i mehaničke karakteristike, kao i na strukturu metalnih bioimplantanata. Ispitivanje uticaja laserskog zračenja visokog intenziteta na površinu metalnih materijala prvenstveno obuhvata ispitivanje morfoloških površinskih promena i formiranja specifičnih površinskih struktura, koje doprinose poboljšanju oseointegracije metalnih implantanata.",
publisher = "Srpsko lekarsko društvo, Beograd",
journal = "Srpski arhiv za celokupno lekarstvo",
title = "Laser surface modification of metallic implant materials, Laserska površinska modifikacija metalnih implantantnih materijala",
volume = "147",
number = "7-8",
pages = "497-501",
doi = "10.2298/SARH181126054L"
}
Laketić, S., Rakin, M., Čairović, A., Maksimović, V.,& Cvijović-Alagić, I.. (2019). Laser surface modification of metallic implant materials. in Srpski arhiv za celokupno lekarstvo
Srpsko lekarsko društvo, Beograd., 147(7-8), 497-501.
https://doi.org/10.2298/SARH181126054L
Laketić S, Rakin M, Čairović A, Maksimović V, Cvijović-Alagić I. Laser surface modification of metallic implant materials. in Srpski arhiv za celokupno lekarstvo. 2019;147(7-8):497-501.
doi:10.2298/SARH181126054L .
Laketić, Slađana, Rakin, Marko, Čairović, Aleksandra, Maksimović, Vesna, Cvijović-Alagić, Ivana, "Laser surface modification of metallic implant materials" in Srpski arhiv za celokupno lekarstvo, 147, no. 7-8 (2019):497-501,
https://doi.org/10.2298/SARH181126054L . .

Recasting as a booster of Ag-Pd alloy cytotoxicity: induction of cell senescence prior to mass cell death

Čairović, Aleksandra; Stanimirović, Dragan; Krajnović, Tamara T.; Dojčinović, Biljana; Maksimović, Vesna; Cvijović-Alagić, Ivana

(Srpsko biološko društvo, Beograd, i dr., 2019)

TY  - JOUR
AU  - Čairović, Aleksandra
AU  - Stanimirović, Dragan
AU  - Krajnović, Tamara T.
AU  - Dojčinović, Biljana
AU  - Maksimović, Vesna
AU  - Cvijović-Alagić, Ivana
PY  - 2019
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/2386
AB  - The biological quality and chemical composition of alloys used in dental practice change during heat treatment. Often the residues of the previous cast are not disposed of but are reused and recycled until consumed. Thus, manufactured dental restorations have modified biological quality and chemical composition, and compromised biocompatibility. The aim of this study was to investigate the influence of repeated casting on the cytotoxicity of the silver-palladium (Ag-Pd) alloy. Our results showed that repeated casting of the Ag-Pd dental alloy affected its biocompatibility by promoting toxicity against transformed fibroblasts in a contact-independent manner. A strong decrease in cell proliferation, induction of senescence and massive cell death were observed in cultures exposed only to a medium previously incubated with dental alloy samples. The obtained data indicated that toxicity mediated by the accumulation of the Ag, Pd, Cu and Zn cations released from the Ag-Pd material was enhanced by recasting. The induction of cell senescence and subsequent apoptotic and necrotic death were accompanied by amplified intracellular production of reactive oxygen and nitrogen species, suggesting their involvement in the cell destruction process. Therefore, compromised biocompatibility after recasting with the Ag-Pd alloy can be the cause of serious local cell destruction, as observed in clinical practice.
PB  - Srpsko biološko društvo, Beograd, i dr.
T2  - Archives of Biological Sciences
T1  - Recasting as a booster of Ag-Pd alloy cytotoxicity: induction of cell senescence prior to mass cell death
VL  - 71
IS  - 2
SP  - 347
EP  - 356
DO  - 10.2298/ABS190305017C
ER  - 
@article{
author = "Čairović, Aleksandra and Stanimirović, Dragan and Krajnović, Tamara T. and Dojčinović, Biljana and Maksimović, Vesna and Cvijović-Alagić, Ivana",
year = "2019",
abstract = "The biological quality and chemical composition of alloys used in dental practice change during heat treatment. Often the residues of the previous cast are not disposed of but are reused and recycled until consumed. Thus, manufactured dental restorations have modified biological quality and chemical composition, and compromised biocompatibility. The aim of this study was to investigate the influence of repeated casting on the cytotoxicity of the silver-palladium (Ag-Pd) alloy. Our results showed that repeated casting of the Ag-Pd dental alloy affected its biocompatibility by promoting toxicity against transformed fibroblasts in a contact-independent manner. A strong decrease in cell proliferation, induction of senescence and massive cell death were observed in cultures exposed only to a medium previously incubated with dental alloy samples. The obtained data indicated that toxicity mediated by the accumulation of the Ag, Pd, Cu and Zn cations released from the Ag-Pd material was enhanced by recasting. The induction of cell senescence and subsequent apoptotic and necrotic death were accompanied by amplified intracellular production of reactive oxygen and nitrogen species, suggesting their involvement in the cell destruction process. Therefore, compromised biocompatibility after recasting with the Ag-Pd alloy can be the cause of serious local cell destruction, as observed in clinical practice.",
publisher = "Srpsko biološko društvo, Beograd, i dr.",
journal = "Archives of Biological Sciences",
title = "Recasting as a booster of Ag-Pd alloy cytotoxicity: induction of cell senescence prior to mass cell death",
volume = "71",
number = "2",
pages = "347-356",
doi = "10.2298/ABS190305017C"
}
Čairović, A., Stanimirović, D., Krajnović, T. T., Dojčinović, B., Maksimović, V.,& Cvijović-Alagić, I.. (2019). Recasting as a booster of Ag-Pd alloy cytotoxicity: induction of cell senescence prior to mass cell death. in Archives of Biological Sciences
Srpsko biološko društvo, Beograd, i dr.., 71(2), 347-356.
https://doi.org/10.2298/ABS190305017C
Čairović A, Stanimirović D, Krajnović TT, Dojčinović B, Maksimović V, Cvijović-Alagić I. Recasting as a booster of Ag-Pd alloy cytotoxicity: induction of cell senescence prior to mass cell death. in Archives of Biological Sciences. 2019;71(2):347-356.
doi:10.2298/ABS190305017C .
Čairović, Aleksandra, Stanimirović, Dragan, Krajnović, Tamara T., Dojčinović, Biljana, Maksimović, Vesna, Cvijović-Alagić, Ivana, "Recasting as a booster of Ag-Pd alloy cytotoxicity: induction of cell senescence prior to mass cell death" in Archives of Biological Sciences, 71, no. 2 (2019):347-356,
https://doi.org/10.2298/ABS190305017C . .

The effect of calcinated hydroxyapatite and magnesium doped hydroxyapatite as fillers on the mechanical properties of a model bisgma/tegdma dental composite initially and after aging

Matić, Tamara; Ležaja-Zebić, Maja; Cvijović-Alagić, Ivana; Miletić, Vesna; Petrović, Rada; Janaćković, Đorđe; Veljović, Đorđe

(Savez inženjera metalurgije Srbije, Beograd, 2018)

TY  - JOUR
AU  - Matić, Tamara
AU  - Ležaja-Zebić, Maja
AU  - Cvijović-Alagić, Ivana
AU  - Miletić, Vesna
AU  - Petrović, Rada
AU  - Janaćković, Đorđe
AU  - Veljović, Đorđe
PY  - 2018
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/2281
AB  - This study aimed to investigate the possibility of modifying model BisGMA/TEGDMA dental composite by substituting 10 wt. % of conventional glass fillers with bioactive fillers based on calcinated nanosized hydroxyapatite (HAp) and Mg-doped hydroxyapatite (Mg-HAp). HAp and Mg-HAp powders were synthesized hydrothermally. Mechanical properties: hardness by Vickers (HV) and flexural strength (Fs) were tested initially and after being stored for 28 days in simulated body fluid (SBF). The experimental composites with HAp and Mg-HAp particles showed no statistically significant difference in HV compared to the control (p>0.05) either initially or after storage. Although mean Fs values of modified composites tested initially were lower (62 MPa) than those of the control (72 MPa), after 28 days of storage in SBF Fs values were greater for modified composites (42 MPa control sample, 48 MPa HAp, and Mg-HAp samples). In vitro bioactivity of BisGMA/TEGDMA composites with HAp and Mg-HAp particles after 28 days in SBF was not detected.
PB  - Savez inženjera metalurgije Srbije, Beograd
T2  - Metallurgical & Materials Engineering
T1  - The effect of calcinated hydroxyapatite and magnesium doped hydroxyapatite as fillers on the mechanical properties of a model bisgma/tegdma dental composite initially and after aging
VL  - 24
IS  - 4
SP  - 271
EP  - 281
DO  - 10.30544/403
ER  - 
@article{
author = "Matić, Tamara and Ležaja-Zebić, Maja and Cvijović-Alagić, Ivana and Miletić, Vesna and Petrović, Rada and Janaćković, Đorđe and Veljović, Đorđe",
year = "2018",
abstract = "This study aimed to investigate the possibility of modifying model BisGMA/TEGDMA dental composite by substituting 10 wt. % of conventional glass fillers with bioactive fillers based on calcinated nanosized hydroxyapatite (HAp) and Mg-doped hydroxyapatite (Mg-HAp). HAp and Mg-HAp powders were synthesized hydrothermally. Mechanical properties: hardness by Vickers (HV) and flexural strength (Fs) were tested initially and after being stored for 28 days in simulated body fluid (SBF). The experimental composites with HAp and Mg-HAp particles showed no statistically significant difference in HV compared to the control (p>0.05) either initially or after storage. Although mean Fs values of modified composites tested initially were lower (62 MPa) than those of the control (72 MPa), after 28 days of storage in SBF Fs values were greater for modified composites (42 MPa control sample, 48 MPa HAp, and Mg-HAp samples). In vitro bioactivity of BisGMA/TEGDMA composites with HAp and Mg-HAp particles after 28 days in SBF was not detected.",
publisher = "Savez inženjera metalurgije Srbije, Beograd",
journal = "Metallurgical & Materials Engineering",
title = "The effect of calcinated hydroxyapatite and magnesium doped hydroxyapatite as fillers on the mechanical properties of a model bisgma/tegdma dental composite initially and after aging",
volume = "24",
number = "4",
pages = "271-281",
doi = "10.30544/403"
}
Matić, T., Ležaja-Zebić, M., Cvijović-Alagić, I., Miletić, V., Petrović, R., Janaćković, Đ.,& Veljović, Đ.. (2018). The effect of calcinated hydroxyapatite and magnesium doped hydroxyapatite as fillers on the mechanical properties of a model bisgma/tegdma dental composite initially and after aging. in Metallurgical & Materials Engineering
Savez inženjera metalurgije Srbije, Beograd., 24(4), 271-281.
https://doi.org/10.30544/403
Matić T, Ležaja-Zebić M, Cvijović-Alagić I, Miletić V, Petrović R, Janaćković Đ, Veljović Đ. The effect of calcinated hydroxyapatite and magnesium doped hydroxyapatite as fillers on the mechanical properties of a model bisgma/tegdma dental composite initially and after aging. in Metallurgical & Materials Engineering. 2018;24(4):271-281.
doi:10.30544/403 .
Matić, Tamara, Ležaja-Zebić, Maja, Cvijović-Alagić, Ivana, Miletić, Vesna, Petrović, Rada, Janaćković, Đorđe, Veljović, Đorđe, "The effect of calcinated hydroxyapatite and magnesium doped hydroxyapatite as fillers on the mechanical properties of a model bisgma/tegdma dental composite initially and after aging" in Metallurgical & Materials Engineering, 24, no. 4 (2018):271-281,
https://doi.org/10.30544/403 . .
3
1

Effects of a low-Shrinkage methacrylate monomer and monoacylphosphine oxide photoinitiator on curing efficiency and mechanical properties of experimental resin-based composites

Manojlović, Dragica; Dramićanin, Miroslav D.; Milošević, Miloš; Zeković, Ivana; Cvijović-Alagić, Ivana; Mitrović, Nenad; Miletić, Vesna

(Elsevier, Amsterdam, 2016)

TY  - JOUR
AU  - Manojlović, Dragica
AU  - Dramićanin, Miroslav D.
AU  - Milošević, Miloš
AU  - Zeković, Ivana
AU  - Cvijović-Alagić, Ivana
AU  - Mitrović, Nenad
AU  - Miletić, Vesna
PY  - 2016
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/2132
AB  - This study investigated the degree of conversion, depth of cure, Vickers hardness, flexural strength, flexural modulus and volumetric shrinkage of experimental composite containing a low shrinkage monomer FIT-852 (FIT; Esstech Inc.) and photoinitiator 2,4,6-trimethylbenzoyldiphenylphosphine oxide (TPO; Sigma Aldrich) compared to conventional composite containing Bisphenol A-glycidyl methacrylate (BisGMA) and camphorquinone-amine photoinitiator system. The degree of conversion was generally higher in FIT-based composites (45-64% range) than in BisGMA-based composites (34-58% range). Vickers hardness, flexural strength and modulus were higher in BisGMA-based composites. A polywave light-curing unit was generally more efficient in terms of conversion and hardness of experimental composites than a monowave unit. FIT-based composite containing TPO showed the depth of cure below 2 mm irrespective of the curing light. The depth of cure of FIT-based composite containing CQ and BisGMA-based composites with either photoinitiator was in the range of 2.8-3.0 mm. Volumetric shrinkage of FIT-based composite (0.9-5.7% range) was lower than that of BisGMA-based composite (2.2-12% range). FIT may be used as a shrinkage reducing monomer compatible with the conventional CQ-amine system as well as the alternative TPO photoinitiator. However, the depth of cure of FIT_TPO composite requires boosting to achieve clinically recommended thickness of 2 mm.
PB  - Elsevier, Amsterdam
T2  - Materials Science & Engineering C - Materials for Biological Applications
T1  - Effects of a low-Shrinkage methacrylate monomer and monoacylphosphine oxide photoinitiator on curing efficiency and mechanical properties of experimental resin-based composites
VL  - 58
SP  - 487
EP  - 494
DO  - 10.1016/j.msec.2015.08.054
ER  - 
@article{
author = "Manojlović, Dragica and Dramićanin, Miroslav D. and Milošević, Miloš and Zeković, Ivana and Cvijović-Alagić, Ivana and Mitrović, Nenad and Miletić, Vesna",
year = "2016",
abstract = "This study investigated the degree of conversion, depth of cure, Vickers hardness, flexural strength, flexural modulus and volumetric shrinkage of experimental composite containing a low shrinkage monomer FIT-852 (FIT; Esstech Inc.) and photoinitiator 2,4,6-trimethylbenzoyldiphenylphosphine oxide (TPO; Sigma Aldrich) compared to conventional composite containing Bisphenol A-glycidyl methacrylate (BisGMA) and camphorquinone-amine photoinitiator system. The degree of conversion was generally higher in FIT-based composites (45-64% range) than in BisGMA-based composites (34-58% range). Vickers hardness, flexural strength and modulus were higher in BisGMA-based composites. A polywave light-curing unit was generally more efficient in terms of conversion and hardness of experimental composites than a monowave unit. FIT-based composite containing TPO showed the depth of cure below 2 mm irrespective of the curing light. The depth of cure of FIT-based composite containing CQ and BisGMA-based composites with either photoinitiator was in the range of 2.8-3.0 mm. Volumetric shrinkage of FIT-based composite (0.9-5.7% range) was lower than that of BisGMA-based composite (2.2-12% range). FIT may be used as a shrinkage reducing monomer compatible with the conventional CQ-amine system as well as the alternative TPO photoinitiator. However, the depth of cure of FIT_TPO composite requires boosting to achieve clinically recommended thickness of 2 mm.",
publisher = "Elsevier, Amsterdam",
journal = "Materials Science & Engineering C - Materials for Biological Applications",
title = "Effects of a low-Shrinkage methacrylate monomer and monoacylphosphine oxide photoinitiator on curing efficiency and mechanical properties of experimental resin-based composites",
volume = "58",
pages = "487-494",
doi = "10.1016/j.msec.2015.08.054"
}
Manojlović, D., Dramićanin, M. D., Milošević, M., Zeković, I., Cvijović-Alagić, I., Mitrović, N.,& Miletić, V.. (2016). Effects of a low-Shrinkage methacrylate monomer and monoacylphosphine oxide photoinitiator on curing efficiency and mechanical properties of experimental resin-based composites. in Materials Science & Engineering C - Materials for Biological Applications
Elsevier, Amsterdam., 58, 487-494.
https://doi.org/10.1016/j.msec.2015.08.054
Manojlović D, Dramićanin MD, Milošević M, Zeković I, Cvijović-Alagić I, Mitrović N, Miletić V. Effects of a low-Shrinkage methacrylate monomer and monoacylphosphine oxide photoinitiator on curing efficiency and mechanical properties of experimental resin-based composites. in Materials Science & Engineering C - Materials for Biological Applications. 2016;58:487-494.
doi:10.1016/j.msec.2015.08.054 .
Manojlović, Dragica, Dramićanin, Miroslav D., Milošević, Miloš, Zeković, Ivana, Cvijović-Alagić, Ivana, Mitrović, Nenad, Miletić, Vesna, "Effects of a low-Shrinkage methacrylate monomer and monoacylphosphine oxide photoinitiator on curing efficiency and mechanical properties of experimental resin-based composites" in Materials Science & Engineering C - Materials for Biological Applications, 58 (2016):487-494,
https://doi.org/10.1016/j.msec.2015.08.054 . .
27
20
28

The recasting effects on the high gold dental alloy properties

Maksimović, Vesna; Čairović, Aleksandra; Pantić, J.R.; Cvijović-Alagić, Ivana

(Univerzitet u Beogradu - Tehnički fakultet u Boru, Beograd, 2015)

TY  - JOUR
AU  - Maksimović, Vesna
AU  - Čairović, Aleksandra
AU  - Pantić, J.R.
AU  - Cvijović-Alagić, Ivana
PY  - 2015
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/2049
AB  - Noble dental alloys are often reused in dental practice by recasting. The aim of this study was to determine if repeated casting of high gold dental alloys has a detrimental effect on alloy microstructure, type of porosity, structure and microhardness. Results showed that recasting procedure had a strong effect on the change of alloy porosity type. It was also found that alloy microhardness increased with the increase of the number of recasting cycles. At the same time the grain growth and changes of the solid solution phases in the microstructure were observed.
PB  - Univerzitet u Beogradu - Tehnički fakultet u Boru, Beograd
T2  - Journal of Mining & Metallurgy B: Metallurgy
T1  - The recasting effects on the high gold dental alloy properties
VL  - 51
IS  - 1
SP  - 55
EP  - 59
DO  - 10.2298/JMMB130716023M
ER  - 
@article{
author = "Maksimović, Vesna and Čairović, Aleksandra and Pantić, J.R. and Cvijović-Alagić, Ivana",
year = "2015",
abstract = "Noble dental alloys are often reused in dental practice by recasting. The aim of this study was to determine if repeated casting of high gold dental alloys has a detrimental effect on alloy microstructure, type of porosity, structure and microhardness. Results showed that recasting procedure had a strong effect on the change of alloy porosity type. It was also found that alloy microhardness increased with the increase of the number of recasting cycles. At the same time the grain growth and changes of the solid solution phases in the microstructure were observed.",
publisher = "Univerzitet u Beogradu - Tehnički fakultet u Boru, Beograd",
journal = "Journal of Mining & Metallurgy B: Metallurgy",
title = "The recasting effects on the high gold dental alloy properties",
volume = "51",
number = "1",
pages = "55-59",
doi = "10.2298/JMMB130716023M"
}
Maksimović, V., Čairović, A., Pantić, J.R.,& Cvijović-Alagić, I.. (2015). The recasting effects on the high gold dental alloy properties. in Journal of Mining & Metallurgy B: Metallurgy
Univerzitet u Beogradu - Tehnički fakultet u Boru, Beograd., 51(1), 55-59.
https://doi.org/10.2298/JMMB130716023M
Maksimović V, Čairović A, Pantić J, Cvijović-Alagić I. The recasting effects on the high gold dental alloy properties. in Journal of Mining & Metallurgy B: Metallurgy. 2015;51(1):55-59.
doi:10.2298/JMMB130716023M .
Maksimović, Vesna, Čairović, Aleksandra, Pantić, J.R., Cvijović-Alagić, Ivana, "The recasting effects on the high gold dental alloy properties" in Journal of Mining & Metallurgy B: Metallurgy, 51, no. 1 (2015):55-59,
https://doi.org/10.2298/JMMB130716023M . .
2
1

Effect of hydroxyapatite spheres, whiskers, and nanoparticles on mechanical properties of a model BisGMA/TEGDMA composite initially and after storage

Ležaja, Maja; Veljović, Đorđe; Jokić, Bojan; Cvijović-Alagić, Ivana; Zrilić, Milorad; Miletić, Vesna

(Wiley-Blackwell, Hoboken, 2013)

TY  - JOUR
AU  - Ležaja, Maja
AU  - Veljović, Đorđe
AU  - Jokić, Bojan
AU  - Cvijović-Alagić, Ivana
AU  - Zrilić, Milorad
AU  - Miletić, Vesna
PY  - 2013
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1848
AB  - This study investigated the effect of shape, size, and surface modification of hydroxyapatite (HAP) fillers on the degree of conversion (DC) and mechanical properties of a model BisGMA/TEGDMA composite initially and after 4 weeks of storage. Ten percent of conventional glass fillers were replaced by HAP spheres (Sph), silicon-doped spheres (Sph(Si)), whiskers (Wh), silicon-doped whiskers (Wh(Si)), and nanosized HAP particles (Nano). Spheres were specifically structured agglomerates consisting of a central void and radially orientated primary particles, whereas whiskers were compact monocrystals. DC, Vickers hardness (HV), flexural strength (Fs), flexural modulus (Ef), compressive strength (Cs), and compressive modulus (Ec) were tested. There were no significant differences in the DC between all tested groups. HV decreased by 5.4-17% with the addition of HAP, while Fs increased by 13.9-29% except in Nano group (decrease by 13%). After storage, Sph and Sph(Si) groups showed similar HV, Ef, Cs and Ec and higher Fs than the control. The fracture mode of HAP spheres was through the central void whereas whiskers showed longitudinal delamination, transverse, and mixed fractures. HAP spheres with or without silicon- doping have a potential to be part of the filler content of dental composites.
PB  - Wiley-Blackwell, Hoboken
T2  - Journal of Biomedical Materials Research Part B: Applied Biomaterials
T1  - Effect of hydroxyapatite spheres, whiskers, and nanoparticles on mechanical properties of a model BisGMA/TEGDMA composite initially and after storage
VL  - 101
IS  - 8
SP  - 1469
EP  - 1476
DO  - 10.1002/jbm.b.32967
ER  - 
@article{
author = "Ležaja, Maja and Veljović, Đorđe and Jokić, Bojan and Cvijović-Alagić, Ivana and Zrilić, Milorad and Miletić, Vesna",
year = "2013",
abstract = "This study investigated the effect of shape, size, and surface modification of hydroxyapatite (HAP) fillers on the degree of conversion (DC) and mechanical properties of a model BisGMA/TEGDMA composite initially and after 4 weeks of storage. Ten percent of conventional glass fillers were replaced by HAP spheres (Sph), silicon-doped spheres (Sph(Si)), whiskers (Wh), silicon-doped whiskers (Wh(Si)), and nanosized HAP particles (Nano). Spheres were specifically structured agglomerates consisting of a central void and radially orientated primary particles, whereas whiskers were compact monocrystals. DC, Vickers hardness (HV), flexural strength (Fs), flexural modulus (Ef), compressive strength (Cs), and compressive modulus (Ec) were tested. There were no significant differences in the DC between all tested groups. HV decreased by 5.4-17% with the addition of HAP, while Fs increased by 13.9-29% except in Nano group (decrease by 13%). After storage, Sph and Sph(Si) groups showed similar HV, Ef, Cs and Ec and higher Fs than the control. The fracture mode of HAP spheres was through the central void whereas whiskers showed longitudinal delamination, transverse, and mixed fractures. HAP spheres with or without silicon- doping have a potential to be part of the filler content of dental composites.",
publisher = "Wiley-Blackwell, Hoboken",
journal = "Journal of Biomedical Materials Research Part B: Applied Biomaterials",
title = "Effect of hydroxyapatite spheres, whiskers, and nanoparticles on mechanical properties of a model BisGMA/TEGDMA composite initially and after storage",
volume = "101",
number = "8",
pages = "1469-1476",
doi = "10.1002/jbm.b.32967"
}
Ležaja, M., Veljović, Đ., Jokić, B., Cvijović-Alagić, I., Zrilić, M.,& Miletić, V.. (2013). Effect of hydroxyapatite spheres, whiskers, and nanoparticles on mechanical properties of a model BisGMA/TEGDMA composite initially and after storage. in Journal of Biomedical Materials Research Part B: Applied Biomaterials
Wiley-Blackwell, Hoboken., 101(8), 1469-1476.
https://doi.org/10.1002/jbm.b.32967
Ležaja M, Veljović Đ, Jokić B, Cvijović-Alagić I, Zrilić M, Miletić V. Effect of hydroxyapatite spheres, whiskers, and nanoparticles on mechanical properties of a model BisGMA/TEGDMA composite initially and after storage. in Journal of Biomedical Materials Research Part B: Applied Biomaterials. 2013;101(8):1469-1476.
doi:10.1002/jbm.b.32967 .
Ležaja, Maja, Veljović, Đorđe, Jokić, Bojan, Cvijović-Alagić, Ivana, Zrilić, Milorad, Miletić, Vesna, "Effect of hydroxyapatite spheres, whiskers, and nanoparticles on mechanical properties of a model BisGMA/TEGDMA composite initially and after storage" in Journal of Biomedical Materials Research Part B: Applied Biomaterials, 101, no. 8 (2013):1469-1476,
https://doi.org/10.1002/jbm.b.32967 . .
28
14
28