Radović, Ivana

Link to this page

Authority KeyName Variants
5206ea35-112b-4a46-b66a-07c963046d63
  • Radović, Ivana (31)
Projects

Author's Bibliography

Changes in pulp sensitivity across the menstrual cycle in healthy women and women with temporomandibular disorders

Krunic, Jelena; Mladenović, Irena; Radović, Ivana; Stojanović, Nikola

(Wiley, 2021)

TY  - JOUR
AU  - Krunic, Jelena
AU  - Mladenović, Irena
AU  - Radović, Ivana
AU  - Stojanović, Nikola
PY  - 2021
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/2574
AB  - Background
Menstrual cycle may contribute to experimental pain measures in healthy women and women with chronic pain.

Objectives
The present study aimed to investigate variation in pulp sensitivity across the menstrual cycle in healthy women and women with temporomandibular disorders (TMD) and to explore the effect of TMD pain and psychosocial variables on the pulp response.

Methods
This longitudinal study involved 47 regularly menstruating women aged 20‐45, 24 healthy and 23 with diagnosed painful TMD. The electric and cold stimuli were performed by electric pulp tester and refrigerant spray, respectively, on mandibular lateral incisors, in five menstrual phases (menstrual, follicular, periovulatory, luteal and premenstrual). Research Diagnostic Criteria for TMD were used to assess TMD, chronic pain, depression and somatisation. Regression analysis was performed to investigate the effect of the predictor variables on the pulp sensitivity.

Results
Significant phase‐related differences were observed for pain intensity to cold stimuli. Higher pain sensitivity was reported in menstrual in comparison with luteal phase (P = .019) among healthy women, and in menstrual in comparison with follicular (P = .033), periovulatory (P = .003) and luteal (P = .007) phases in TMD women. No significant differences were recorded for electric stimuli. Regression analysis identified depression as the determinant of cold and electric response in menstrual phase, regardless of age and presence of TMD.

Conclusion
Menstrual phase in healthy and TMD women with regular menstrual cycle is characterised with higher pulp sensitivity to cold stimuli. Depressive symptoms independently influence pulp response in this phase.
PB  - Wiley
T2  - Journal of Oral Rehabilitationa
T1  - Changes in pulp sensitivity across the menstrual cycle in healthy women and women with temporomandibular disorders
VL  - 48
IS  - 2
SP  - 124
EP  - 131
DO  - 10.1111/joor.13116
ER  - 
@article{
author = "Krunic, Jelena and Mladenović, Irena and Radović, Ivana and Stojanović, Nikola",
year = "2021",
abstract = "Background
Menstrual cycle may contribute to experimental pain measures in healthy women and women with chronic pain.

Objectives
The present study aimed to investigate variation in pulp sensitivity across the menstrual cycle in healthy women and women with temporomandibular disorders (TMD) and to explore the effect of TMD pain and psychosocial variables on the pulp response.

Methods
This longitudinal study involved 47 regularly menstruating women aged 20‐45, 24 healthy and 23 with diagnosed painful TMD. The electric and cold stimuli were performed by electric pulp tester and refrigerant spray, respectively, on mandibular lateral incisors, in five menstrual phases (menstrual, follicular, periovulatory, luteal and premenstrual). Research Diagnostic Criteria for TMD were used to assess TMD, chronic pain, depression and somatisation. Regression analysis was performed to investigate the effect of the predictor variables on the pulp sensitivity.

Results
Significant phase‐related differences were observed for pain intensity to cold stimuli. Higher pain sensitivity was reported in menstrual in comparison with luteal phase (P = .019) among healthy women, and in menstrual in comparison with follicular (P = .033), periovulatory (P = .003) and luteal (P = .007) phases in TMD women. No significant differences were recorded for electric stimuli. Regression analysis identified depression as the determinant of cold and electric response in menstrual phase, regardless of age and presence of TMD.

Conclusion
Menstrual phase in healthy and TMD women with regular menstrual cycle is characterised with higher pulp sensitivity to cold stimuli. Depressive symptoms independently influence pulp response in this phase.",
publisher = "Wiley",
journal = "Journal of Oral Rehabilitationa",
title = "Changes in pulp sensitivity across the menstrual cycle in healthy women and women with temporomandibular disorders",
volume = "48",
number = "2",
pages = "124-131",
doi = "10.1111/joor.13116"
}
Krunic, J., Mladenović, I., Radović, I.,& Stojanović, N.. (2021). Changes in pulp sensitivity across the menstrual cycle in healthy women and women with temporomandibular disorders. in Journal of Oral Rehabilitationa
Wiley., 48(2), 124-131.
https://doi.org/10.1111/joor.13116
Krunic J, Mladenović I, Radović I, Stojanović N. Changes in pulp sensitivity across the menstrual cycle in healthy women and women with temporomandibular disorders. in Journal of Oral Rehabilitationa. 2021;48(2):124-131.
doi:10.1111/joor.13116 .
Krunic, Jelena, Mladenović, Irena, Radović, Ivana, Stojanović, Nikola, "Changes in pulp sensitivity across the menstrual cycle in healthy women and women with temporomandibular disorders" in Journal of Oral Rehabilitationa, 48, no. 2 (2021):124-131,
https://doi.org/10.1111/joor.13116 . .
1

Treatment after inadequate immediate replantation of accidentally extracted immature mandibular premolar during primary molar extraction

Juloski, Jelena; Dimitrijević, Maja; Juloski, Jovana; Radović, Ivana

(Wiley, Hoboken, 2020)

TY  - JOUR
AU  - Juloski, Jelena
AU  - Dimitrijević, Maja
AU  - Juloski, Jovana
AU  - Radović, Ivana
PY  - 2020
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/2529
AB  - During extraction of the primary mandibular right second molar in an 11-year-old girl, the unerupted second premolar was accidentally extracted. Clinical and radiographic examination showed that the immediately replanted immature premolar was not oriented and positioned correctly. Four hours later, treatment consisted of manual extrusion of the permanent tooth bud, rotation, and gentle repositioning into its original position. Adequate replantation was confirmed by a post-operative radiograph. After 2 years and 4 months, clinical examination revealed normal, healthy appearance of the replanted tooth, no sensitivity to percussion, no tenderness to palpation, and a slight response to a cold pulp sensibility test. A radiograph showed completely developed root with closed apical foramen, slightly irregular root morphology and shorter root length, complete obliteration of the pulp, and no signs of periapical pathosis.
PB  - Wiley, Hoboken
T2  - Dental Traumatology
T1  - Treatment after inadequate immediate replantation of accidentally extracted immature mandibular premolar during primary molar extraction
DO  - 10.1111/edt.12558
ER  - 
@article{
author = "Juloski, Jelena and Dimitrijević, Maja and Juloski, Jovana and Radović, Ivana",
year = "2020",
abstract = "During extraction of the primary mandibular right second molar in an 11-year-old girl, the unerupted second premolar was accidentally extracted. Clinical and radiographic examination showed that the immediately replanted immature premolar was not oriented and positioned correctly. Four hours later, treatment consisted of manual extrusion of the permanent tooth bud, rotation, and gentle repositioning into its original position. Adequate replantation was confirmed by a post-operative radiograph. After 2 years and 4 months, clinical examination revealed normal, healthy appearance of the replanted tooth, no sensitivity to percussion, no tenderness to palpation, and a slight response to a cold pulp sensibility test. A radiograph showed completely developed root with closed apical foramen, slightly irregular root morphology and shorter root length, complete obliteration of the pulp, and no signs of periapical pathosis.",
publisher = "Wiley, Hoboken",
journal = "Dental Traumatology",
title = "Treatment after inadequate immediate replantation of accidentally extracted immature mandibular premolar during primary molar extraction",
doi = "10.1111/edt.12558"
}
Juloski, J., Dimitrijević, M., Juloski, J.,& Radović, I.. (2020). Treatment after inadequate immediate replantation of accidentally extracted immature mandibular premolar during primary molar extraction. in Dental Traumatology
Wiley, Hoboken..
https://doi.org/10.1111/edt.12558
Juloski J, Dimitrijević M, Juloski J, Radović I. Treatment after inadequate immediate replantation of accidentally extracted immature mandibular premolar during primary molar extraction. in Dental Traumatology. 2020;.
doi:10.1111/edt.12558 .
Juloski, Jelena, Dimitrijević, Maja, Juloski, Jovana, Radović, Ivana, "Treatment after inadequate immediate replantation of accidentally extracted immature mandibular premolar during primary molar extraction" in Dental Traumatology (2020),
https://doi.org/10.1111/edt.12558 . .

Treatment after inadequate immediate replantation of accidentally extracted immature mandibular premolar during primary molar extraction

Juloski, Jelena; Dimitrijević, Maja; Juloski, Jovana; Radović, Ivana

(Wiley, Hoboken, 2020)

TY  - JOUR
AU  - Juloski, Jelena
AU  - Dimitrijević, Maja
AU  - Juloski, Jovana
AU  - Radović, Ivana
PY  - 2020
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1048
AB  - During extraction of the primary mandibular right second molar in an 11-year-old girl, the unerupted second premolar was accidentally extracted. Clinical and radiographic examination showed that the immediately replanted immature premolar was not oriented and positioned correctly. Four hours later, treatment consisted of manual extrusion of the permanent tooth bud, rotation, and gentle repositioning into its original position. Adequate replantation was confirmed by a post-operative radiograph. After 2 years and 4 months, clinical examination revealed normal, healthy appearance of the replanted tooth, no sensitivity to percussion, no tenderness to palpation, and a slight response to a cold pulp sensibility test. A radiograph showed completely developed root with closed apical foramen, slightly irregular root morphology and shorter root length, complete obliteration of the pulp, and no signs of periapical pathosis.
PB  - Wiley, Hoboken
T2  - Dental Traumatology
T1  - Treatment after inadequate immediate replantation of accidentally extracted immature mandibular premolar during primary molar extraction
DO  - 10.1111/edt.12558
ER  - 
@article{
author = "Juloski, Jelena and Dimitrijević, Maja and Juloski, Jovana and Radović, Ivana",
year = "2020",
abstract = "During extraction of the primary mandibular right second molar in an 11-year-old girl, the unerupted second premolar was accidentally extracted. Clinical and radiographic examination showed that the immediately replanted immature premolar was not oriented and positioned correctly. Four hours later, treatment consisted of manual extrusion of the permanent tooth bud, rotation, and gentle repositioning into its original position. Adequate replantation was confirmed by a post-operative radiograph. After 2 years and 4 months, clinical examination revealed normal, healthy appearance of the replanted tooth, no sensitivity to percussion, no tenderness to palpation, and a slight response to a cold pulp sensibility test. A radiograph showed completely developed root with closed apical foramen, slightly irregular root morphology and shorter root length, complete obliteration of the pulp, and no signs of periapical pathosis.",
publisher = "Wiley, Hoboken",
journal = "Dental Traumatology",
title = "Treatment after inadequate immediate replantation of accidentally extracted immature mandibular premolar during primary molar extraction",
doi = "10.1111/edt.12558"
}
Juloski, J., Dimitrijević, M., Juloski, J.,& Radović, I.. (2020). Treatment after inadequate immediate replantation of accidentally extracted immature mandibular premolar during primary molar extraction. in Dental Traumatology
Wiley, Hoboken..
https://doi.org/10.1111/edt.12558
Juloski J, Dimitrijević M, Juloski J, Radović I. Treatment after inadequate immediate replantation of accidentally extracted immature mandibular premolar during primary molar extraction. in Dental Traumatology. 2020;.
doi:10.1111/edt.12558 .
Juloski, Jelena, Dimitrijević, Maja, Juloski, Jovana, Radović, Ivana, "Treatment after inadequate immediate replantation of accidentally extracted immature mandibular premolar during primary molar extraction" in Dental Traumatology (2020),
https://doi.org/10.1111/edt.12558 . .

Oral health difficulties in children and adolescents with autism spectrum disorder: Parental perception

Radović, Ivana; Juloski, Jelena; Josić, Uroš; Beloica, Miloš; Kosanović, Dušan

(Srpsko lekarsko društvo, Beograd, 2018)

TY  - JOUR
AU  - Radović, Ivana
AU  - Juloski, Jelena
AU  - Josić, Uroš
AU  - Beloica, Miloš
AU  - Kosanović, Dušan
PY  - 2018
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/2350
AB  - Introduction/Objective Autism spectrum disorder (ASD) is characterized by features that have the potential to make oral hygiene and dental appointments challenging. The aim of this study was to investigate difficulties related to oral hygiene and dental appointments that may be encountered in children and adolescents with ASD, in comparison to their typically developing peers. Methods A 48-item questionnaire was prepared for the purpose of the study and distributed to parents of children and adolescents with ASD in three specialized daycare centers, as well as to parents of typically developing children and adolescents at the Clinic for Pediatric and Preventive Dentistry in Belgrade, Serbia. Ninety-two questionnaires were considered and statistically analyzed in the SPSS program, using χ2 and Mann-Whitney U-test. Results The following statistically significant differences were found between children and adolescents with ASD and their typically developing peers: general difficulties in everyday oral hygiene, need of help for basic oral hygiene tasks, tooth brushing frequency, sensory difficulties related to toothbrush and toothpaste, level of anxiety prior to dental appointment, cooperation during appointment, sensory difficulties related to touch, operatory light and sound of dental unit, number of treatments under general anesthesia, and the number of refused dental treatments. Conclusion Children and adolescents with ASD face significantly more difficulties concerning everyday oral hygiene and dental appointments in comparison to their typically developing peers. Dentists' awareness of issues that are specific to this population of patients is important in order to enable quality dental care.
AB  - Uvod/Cilj Poremećaji autističnog spektra (PAS) mogu biti uzrok poteškoća vezanih za održavanje oralne higijene, kao i za posete stomatologu. Cilj rada je bio da se utvrde razlike između dece i adolescenata sa PAS i kontrolne grupe neurotipičnih vršnjaka sa aspekta održavanja oralne higijene i poseta stomatologu. Metode Upitnik od 48 pitanja distribuiran je roditeljima dece i adolescenata sa PAS u tri specijalizovana dnevna boravka, kao i roditeljima kontrolne grupe neurotipičnih vršnjaka. Devedeset dva upitnika je uzeto u obzir i statistički analizirano u programu SPSS. Rezultati Statistički značajne razlike između dece i adolescenata sa PAS i njihovih tipično razvijenih vršnjaka utvrđene su u sledećim kategorijama: teškoće u svakodnevnoj oralnoj higijeni, potreba za pomoći u održavanju oralne higijene, učestalost pranja zuba, senzorne teškoće vezane za četkicu i zubnu pastu, nivo anksioznosti pre posete stomatologu, saradnja tokom stomatološkog tretmana, senzorne teškoće vezane za dodir stomatologa, svetlo i zvuk stomatološkog uređaja, broj tretmana pod opštom anestezijom i broj odbijenih stomatoloških usluga. Zaključak Deca i adolescenti sa PAS suočavaju se sa znatno većim poteškoćama u pogledu svakodnevne oralne higijene i poseta stomatologu u poređenju sa tipično razvijenim vršnjacima. Svest stomatologa o pitanjima koja su specifična za ovu populaciju pacijenata je važna kako bi se deci i adolescentima sa PAS omogućila kvalitetna stomatološka nega.
PB  - Srpsko lekarsko društvo, Beograd
T2  - Srpski arhiv za celokupno lekarstvo
T1  - Oral health difficulties in children and adolescents with autism spectrum disorder: Parental perception
T1  - Teškoće u održavanju oralnog zdravlja kod dece i adolescenata sa poremećajima iz autističnog spektra - opažanja roditelja
VL  - 146
IS  - 11-12
SP  - 624
EP  - 628
DO  - 10.2298/SARH171204015R
ER  - 
@article{
author = "Radović, Ivana and Juloski, Jelena and Josić, Uroš and Beloica, Miloš and Kosanović, Dušan",
year = "2018",
abstract = "Introduction/Objective Autism spectrum disorder (ASD) is characterized by features that have the potential to make oral hygiene and dental appointments challenging. The aim of this study was to investigate difficulties related to oral hygiene and dental appointments that may be encountered in children and adolescents with ASD, in comparison to their typically developing peers. Methods A 48-item questionnaire was prepared for the purpose of the study and distributed to parents of children and adolescents with ASD in three specialized daycare centers, as well as to parents of typically developing children and adolescents at the Clinic for Pediatric and Preventive Dentistry in Belgrade, Serbia. Ninety-two questionnaires were considered and statistically analyzed in the SPSS program, using χ2 and Mann-Whitney U-test. Results The following statistically significant differences were found between children and adolescents with ASD and their typically developing peers: general difficulties in everyday oral hygiene, need of help for basic oral hygiene tasks, tooth brushing frequency, sensory difficulties related to toothbrush and toothpaste, level of anxiety prior to dental appointment, cooperation during appointment, sensory difficulties related to touch, operatory light and sound of dental unit, number of treatments under general anesthesia, and the number of refused dental treatments. Conclusion Children and adolescents with ASD face significantly more difficulties concerning everyday oral hygiene and dental appointments in comparison to their typically developing peers. Dentists' awareness of issues that are specific to this population of patients is important in order to enable quality dental care., Uvod/Cilj Poremećaji autističnog spektra (PAS) mogu biti uzrok poteškoća vezanih za održavanje oralne higijene, kao i za posete stomatologu. Cilj rada je bio da se utvrde razlike između dece i adolescenata sa PAS i kontrolne grupe neurotipičnih vršnjaka sa aspekta održavanja oralne higijene i poseta stomatologu. Metode Upitnik od 48 pitanja distribuiran je roditeljima dece i adolescenata sa PAS u tri specijalizovana dnevna boravka, kao i roditeljima kontrolne grupe neurotipičnih vršnjaka. Devedeset dva upitnika je uzeto u obzir i statistički analizirano u programu SPSS. Rezultati Statistički značajne razlike između dece i adolescenata sa PAS i njihovih tipično razvijenih vršnjaka utvrđene su u sledećim kategorijama: teškoće u svakodnevnoj oralnoj higijeni, potreba za pomoći u održavanju oralne higijene, učestalost pranja zuba, senzorne teškoće vezane za četkicu i zubnu pastu, nivo anksioznosti pre posete stomatologu, saradnja tokom stomatološkog tretmana, senzorne teškoće vezane za dodir stomatologa, svetlo i zvuk stomatološkog uređaja, broj tretmana pod opštom anestezijom i broj odbijenih stomatoloških usluga. Zaključak Deca i adolescenti sa PAS suočavaju se sa znatno većim poteškoćama u pogledu svakodnevne oralne higijene i poseta stomatologu u poređenju sa tipično razvijenim vršnjacima. Svest stomatologa o pitanjima koja su specifična za ovu populaciju pacijenata je važna kako bi se deci i adolescentima sa PAS omogućila kvalitetna stomatološka nega.",
publisher = "Srpsko lekarsko društvo, Beograd",
journal = "Srpski arhiv za celokupno lekarstvo",
title = "Oral health difficulties in children and adolescents with autism spectrum disorder: Parental perception, Teškoće u održavanju oralnog zdravlja kod dece i adolescenata sa poremećajima iz autističnog spektra - opažanja roditelja",
volume = "146",
number = "11-12",
pages = "624-628",
doi = "10.2298/SARH171204015R"
}
Radović, I., Juloski, J., Josić, U., Beloica, M.,& Kosanović, D.. (2018). Oral health difficulties in children and adolescents with autism spectrum disorder: Parental perception. in Srpski arhiv za celokupno lekarstvo
Srpsko lekarsko društvo, Beograd., 146(11-12), 624-628.
https://doi.org/10.2298/SARH171204015R
Radović I, Juloski J, Josić U, Beloica M, Kosanović D. Oral health difficulties in children and adolescents with autism spectrum disorder: Parental perception. in Srpski arhiv za celokupno lekarstvo. 2018;146(11-12):624-628.
doi:10.2298/SARH171204015R .
Radović, Ivana, Juloski, Jelena, Josić, Uroš, Beloica, Miloš, Kosanović, Dušan, "Oral health difficulties in children and adolescents with autism spectrum disorder: Parental perception" in Srpski arhiv za celokupno lekarstvo, 146, no. 11-12 (2018):624-628,
https://doi.org/10.2298/SARH171204015R . .

Prosthetics in paediatric dentistry

Vulićević, Zoran; Beloica, Miloš; Kosanović, Dušan; Radović, Ivana; Juloski, Jelena; Ivanović, Dragan

(Udruženje stomatologa Balkana, 2017)

TY  - JOUR
AU  - Vulićević, Zoran
AU  - Beloica, Miloš
AU  - Kosanović, Dušan
AU  - Radović, Ivana
AU  - Juloski, Jelena
AU  - Ivanović, Dragan
PY  - 2017
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/2246
AB  - Premature loss of teeth in children may lead to both functional and esthetic problems. Missing teeth in both anterior and posterior regions may cause malfunctions in mastication and proper pronunciation. If the missing teeth are not replaced, further complications may occur, including adjacent tooth migration, loss of alveolar bone, and irregular occlusion. Considering the sensitive nature of children, loss of teeth may cause the development of insecurities and low self esteem problems. Due to dynamic nature of growth in children and adolescents, prosthetic appliances must not hinder development of orofacial system, and must meet adequate esthetic and functional standards. Dental prosthetic appliances in paediatrics must be planned with respect to the special conditions that led to tooth loss or damage. Multi-disciplinary approach is needed, under constant supervision of paediatric dentist and orthodontist, as well as regular checkups with clinical and radiographical examinations.
PB  - Udruženje stomatologa Balkana
T2  - Balkan Journal of Dental Medicine
T1  - Prosthetics in paediatric dentistry
VL  - 21
IS  - 2
SP  - 78
EP  - 82
DO  - 10.1515/bjdm-2017-0012
ER  - 
@article{
author = "Vulićević, Zoran and Beloica, Miloš and Kosanović, Dušan and Radović, Ivana and Juloski, Jelena and Ivanović, Dragan",
year = "2017",
abstract = "Premature loss of teeth in children may lead to both functional and esthetic problems. Missing teeth in both anterior and posterior regions may cause malfunctions in mastication and proper pronunciation. If the missing teeth are not replaced, further complications may occur, including adjacent tooth migration, loss of alveolar bone, and irregular occlusion. Considering the sensitive nature of children, loss of teeth may cause the development of insecurities and low self esteem problems. Due to dynamic nature of growth in children and adolescents, prosthetic appliances must not hinder development of orofacial system, and must meet adequate esthetic and functional standards. Dental prosthetic appliances in paediatrics must be planned with respect to the special conditions that led to tooth loss or damage. Multi-disciplinary approach is needed, under constant supervision of paediatric dentist and orthodontist, as well as regular checkups with clinical and radiographical examinations.",
publisher = "Udruženje stomatologa Balkana",
journal = "Balkan Journal of Dental Medicine",
title = "Prosthetics in paediatric dentistry",
volume = "21",
number = "2",
pages = "78-82",
doi = "10.1515/bjdm-2017-0012"
}
Vulićević, Z., Beloica, M., Kosanović, D., Radović, I., Juloski, J.,& Ivanović, D.. (2017). Prosthetics in paediatric dentistry. in Balkan Journal of Dental Medicine
Udruženje stomatologa Balkana., 21(2), 78-82.
https://doi.org/10.1515/bjdm-2017-0012
Vulićević Z, Beloica M, Kosanović D, Radović I, Juloski J, Ivanović D. Prosthetics in paediatric dentistry. in Balkan Journal of Dental Medicine. 2017;21(2):78-82.
doi:10.1515/bjdm-2017-0012 .
Vulićević, Zoran, Beloica, Miloš, Kosanović, Dušan, Radović, Ivana, Juloski, Jelena, Ivanović, Dragan, "Prosthetics in paediatric dentistry" in Balkan Journal of Dental Medicine, 21, no. 2 (2017):78-82,
https://doi.org/10.1515/bjdm-2017-0012 . .
3

The application of air abrasion in dentistry

Mandinić, Zoran; Vulićević, Zoran; Beloica, Miloš; Radović, Ivana; Mandić, Jelena; Carević, Momir; Tekić, Jasmina

(Srpsko lekarsko društvo, Beograd, 2014)

TY  - JOUR
AU  - Mandinić, Zoran
AU  - Vulićević, Zoran
AU  - Beloica, Miloš
AU  - Radović, Ivana
AU  - Mandić, Jelena
AU  - Carević, Momir
AU  - Tekić, Jasmina
PY  - 2014
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1920
AB  - One of the main objectives of contemporary dentistry is to preserve healthy tooth structure by applying techniques of noninvasive treatment. Air abrasion is a minimally invasive non mechanical technique of tooth preparation that uses kinetic energy to remove carious tooth structure. A powerful narrow stream of moving aluminum-oxide particles hit the tooth surface and they abrade it without heat, vibration or noise. Variables that affect speed of cutting include air pressure, particle size, powder flow, tip's size, angle and distance from the tooth. It has been proposed that air abrasion can be used to diagnose early occlusal-surface lesions and treat them with minimal tooth preparation using magnifier. Reported advantages of air abrasion include reduced noise, vibration and sensitivity. Air abrasion cavity preparations have more rounded internal contours than those prepared with straight burs. This may increase the longevity of placed restorations because it reduces the incidence of fractures and a consequence of decreased internal stresses. However, air abrasion cannot be used for all patients, i.e. in cases involving severe dust allergy, asthma, chronic obstructive lung disease, recent extraction or other oral surgery, open wounds, advanced periodontal disease, recent placement of orthodontic appliances and oral abrasions, or subgingival caries removal. Many of these conditions increase the risk of air embolism in the oral soft tissues. Dust control is a challenge, and it necessitates the use of rubber dam, high-volume evacuation, protective masks and safety eyewear for both the patient and the therapist.
AB  - Jedan od osnovnih ciljeva savremene stomatologije jeste očuvanje zdravog zubnog tkiva primenom preventivnih metoda i tehnika neinvazivnog lečenja. Vazdušna abrazija je minimalno invazivna tehnika preparacije kaviteta koja koristi kinetičku energiju za uklanjanje karijesa. Usmeravanje pravolinijskog mlaza čestica aluminijum- oksida na površinu zuba koja se obrađuje dovodi do abrazije supstrata bez toplote, vibracija i zvuka. Faktori koji utiču na brzinu preparacije uključuju intenzitet vazdušnog pritiska, veličinu čestica abraziva, brzinu protoka čestica, prečnik vrha kanile, veličinu ugla kanile i udaljenost vrha kanile od površine zuba koja se obrađuje. Njena upotreba se savetuje u dijagnostici rane karijesne lezije gleđi na okluzalnim površinama zuba i minimalnoj preparaciji kaviteta. Pojedini autori preporučuju i upotrebu optičkih pomagala. Prednosti tehnike vazdušne abrazije uključuju smanjenje buke, vibracija i operativne osetljivosti, koja je veoma subjektivna i promenljiva kod pacijenata. Kaviteti preparisani vazdušnom abrazijom imaju zaobljene ivice, za razliku od kaviteta preparisanih standardnim tehnikama. To može povećati dugotrajnost postavljenih ispuna, jer se smanjuje mogućnost nastanka njihovog odlamanja, neutralisanjem sila unutrašnjeg napona u poređenju sa stresom koji se javlja kod angularnih preparacija. Primena tehnike vazdušne abrazije je kontraindikovana kod osoba alergičnih na prašinu, obolelih od astme ili hronične opstruktivne bolesti pluća, pacijenata sa postekstrakcionim ranama, parodontopatijom, ortodontskim aparatima ili dubokim karijesom, jer se ovom tehnikom preparacije ne odstranjuje uspešno mekana dentinska struktura. Mnoga ova stanja povećavaju rizik od nastanka vazdušne embolije u mekim oralnim tkivima. Kontrola rasejanja čestica abraziva predstavlja izazov kliničkom stomatologu, a zahteva i primenu koferdama, jakih aspiratora, zaštitnih maski i zaštitnih naočara kako kod pacijenta, tako i kod terapeuta.
PB  - Srpsko lekarsko društvo, Beograd
T2  - Srpski arhiv za celokupno lekarstvo
T1  - The application of air abrasion in dentistry
T1  - Primena vazdušne abrazije u stomatologiji
VL  - 142
IS  - 1-2
SP  - 99
EP  - 105
DO  - 10.2298/SARH1402099M
ER  - 
@article{
author = "Mandinić, Zoran and Vulićević, Zoran and Beloica, Miloš and Radović, Ivana and Mandić, Jelena and Carević, Momir and Tekić, Jasmina",
year = "2014",
abstract = "One of the main objectives of contemporary dentistry is to preserve healthy tooth structure by applying techniques of noninvasive treatment. Air abrasion is a minimally invasive non mechanical technique of tooth preparation that uses kinetic energy to remove carious tooth structure. A powerful narrow stream of moving aluminum-oxide particles hit the tooth surface and they abrade it without heat, vibration or noise. Variables that affect speed of cutting include air pressure, particle size, powder flow, tip's size, angle and distance from the tooth. It has been proposed that air abrasion can be used to diagnose early occlusal-surface lesions and treat them with minimal tooth preparation using magnifier. Reported advantages of air abrasion include reduced noise, vibration and sensitivity. Air abrasion cavity preparations have more rounded internal contours than those prepared with straight burs. This may increase the longevity of placed restorations because it reduces the incidence of fractures and a consequence of decreased internal stresses. However, air abrasion cannot be used for all patients, i.e. in cases involving severe dust allergy, asthma, chronic obstructive lung disease, recent extraction or other oral surgery, open wounds, advanced periodontal disease, recent placement of orthodontic appliances and oral abrasions, or subgingival caries removal. Many of these conditions increase the risk of air embolism in the oral soft tissues. Dust control is a challenge, and it necessitates the use of rubber dam, high-volume evacuation, protective masks and safety eyewear for both the patient and the therapist., Jedan od osnovnih ciljeva savremene stomatologije jeste očuvanje zdravog zubnog tkiva primenom preventivnih metoda i tehnika neinvazivnog lečenja. Vazdušna abrazija je minimalno invazivna tehnika preparacije kaviteta koja koristi kinetičku energiju za uklanjanje karijesa. Usmeravanje pravolinijskog mlaza čestica aluminijum- oksida na površinu zuba koja se obrađuje dovodi do abrazije supstrata bez toplote, vibracija i zvuka. Faktori koji utiču na brzinu preparacije uključuju intenzitet vazdušnog pritiska, veličinu čestica abraziva, brzinu protoka čestica, prečnik vrha kanile, veličinu ugla kanile i udaljenost vrha kanile od površine zuba koja se obrađuje. Njena upotreba se savetuje u dijagnostici rane karijesne lezije gleđi na okluzalnim površinama zuba i minimalnoj preparaciji kaviteta. Pojedini autori preporučuju i upotrebu optičkih pomagala. Prednosti tehnike vazdušne abrazije uključuju smanjenje buke, vibracija i operativne osetljivosti, koja je veoma subjektivna i promenljiva kod pacijenata. Kaviteti preparisani vazdušnom abrazijom imaju zaobljene ivice, za razliku od kaviteta preparisanih standardnim tehnikama. To može povećati dugotrajnost postavljenih ispuna, jer se smanjuje mogućnost nastanka njihovog odlamanja, neutralisanjem sila unutrašnjeg napona u poređenju sa stresom koji se javlja kod angularnih preparacija. Primena tehnike vazdušne abrazije je kontraindikovana kod osoba alergičnih na prašinu, obolelih od astme ili hronične opstruktivne bolesti pluća, pacijenata sa postekstrakcionim ranama, parodontopatijom, ortodontskim aparatima ili dubokim karijesom, jer se ovom tehnikom preparacije ne odstranjuje uspešno mekana dentinska struktura. Mnoga ova stanja povećavaju rizik od nastanka vazdušne embolije u mekim oralnim tkivima. Kontrola rasejanja čestica abraziva predstavlja izazov kliničkom stomatologu, a zahteva i primenu koferdama, jakih aspiratora, zaštitnih maski i zaštitnih naočara kako kod pacijenta, tako i kod terapeuta.",
publisher = "Srpsko lekarsko društvo, Beograd",
journal = "Srpski arhiv za celokupno lekarstvo",
title = "The application of air abrasion in dentistry, Primena vazdušne abrazije u stomatologiji",
volume = "142",
number = "1-2",
pages = "99-105",
doi = "10.2298/SARH1402099M"
}
Mandinić, Z., Vulićević, Z., Beloica, M., Radović, I., Mandić, J., Carević, M.,& Tekić, J.. (2014). The application of air abrasion in dentistry. in Srpski arhiv za celokupno lekarstvo
Srpsko lekarsko društvo, Beograd., 142(1-2), 99-105.
https://doi.org/10.2298/SARH1402099M
Mandinić Z, Vulićević Z, Beloica M, Radović I, Mandić J, Carević M, Tekić J. The application of air abrasion in dentistry. in Srpski arhiv za celokupno lekarstvo. 2014;142(1-2):99-105.
doi:10.2298/SARH1402099M .
Mandinić, Zoran, Vulićević, Zoran, Beloica, Miloš, Radović, Ivana, Mandić, Jelena, Carević, Momir, Tekić, Jasmina, "The application of air abrasion in dentistry" in Srpski arhiv za celokupno lekarstvo, 142, no. 1-2 (2014):99-105,
https://doi.org/10.2298/SARH1402099M . .
3
1
1

Hard dental tissue minimal-invasive preparation using contemporary polymer rotating instruments and laser

Beloica, Miloš; Vulićević, Zoran; Mandinić, Zoran; Radović, Ivana; Jovičić, Olivera; Carević, Momir; Tekić, Jasmina

(Srpsko lekarsko društvo, Beograd, 2014)

TY  - JOUR
AU  - Beloica, Miloš
AU  - Vulićević, Zoran
AU  - Mandinić, Zoran
AU  - Radović, Ivana
AU  - Jovičić, Olivera
AU  - Carević, Momir
AU  - Tekić, Jasmina
PY  - 2014
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1915
AB  - Goal of contemporary dentistry is to decrease the patient's discomfort during treatment. Dentists aim to achieve maximum with the newly developed dental materials as well as with new cavity preparation techniques in the shortest time span. Since the development of the first constructed borer (drilling machine) for caries removal, the preparation techniques have considerably changed. The progress of dental materials as well as the cavity preparation techniques has led us to contemporary carbide tungsten and diamond borers that are used with obligatory water cooling. The innovation within this field represents newly developed polymer borers that can detect the difference between carious lesions and healthy tooth structure. In this way the cavity preparation may be performed without damaging dental healthy tissue. This is possible owing to their hardness which is lower than the hardness of intact dentin. Polymer borer preparation is painless with less vibration, while the increase in temperature is negligible. Lasers have been used in clinical dentistry since 1980s so it can be said that they represent a new technology. The function of lasers is based on ablation which requires water. Erbium lasers have shown the highest potential with their ability to produce effective ablation of hard dental tissues. Laser application in dentistry requires special training as well as some protective measures. Laser advantages, compared to traditional preparation techniques, involve the absence of vibration, painless preparation, possibility of preparation without anesthetic and easier patient's adjustment to dental intervention which is of importance, especially in pediatric dentistry.
AB  - Savremena stomatologija teži ka što manjoj traumatizaciji pacijenta prilikom rada uz maksimalni učinak. Savremeni materijali uz nove vidove preparacije kaviteta pružaju mogućnost sanacije karijesnih lezija u najkraćem vremenskom roku. Vidovi preparacije kaviteta su se znatno promenili otkako je uvedeno prvo mašinski napravljeno svrdlo za uklanjanje karijesa. Tehnološki napredak materijala za ispune i načina preparacije doveli su do savremenih karbidnih i dijamantskih svrdla koja se koriste uz obavezno vodeno hlađenje. Inovaciju na polju rotirajućih instrumenata predstavljaju polimerna 'pametna' svrdla, koja uklanjaju karijesnu leziju bez mogućnosti povređivanja i uklanjanja zdrave zubne strukture. Ovo je moguće zahvaljujući čvrstoći koju poseduju, koja je manja od čvrstoće zdravog dentina. Zahvaljujući prirodi materijala od kojih su izrađena, ova svrdla omogućuju bezbolniji rad uz manje vibracija i slabije zagrevanje zubne supstance. Laseri su relativno novo tehnološko sredstvo u stomatologiji, a njihova klinička upotreba počela je osamdesetih godina dvadesetog veka. Laseri funkcionišu po principu ablacije, za šta je neophodno prisustvo vode. Najveći potencijal među ispitivanim laserima pokazali su erbijumski laseri, kojima je moguće uraditi efikasnu ablaciju čvrstih zubnih tkiva. Za korišćenje lasera u stomatologiji neophodni su posebna obuka i odgovarajuće mere zaštite. Prednosti lasera u poređenju sa drugim metodama preparacije čvrstih zubnih tkiva su nepostojanje vibracija, bezbolan rad, mogućnost rada bez anestezije i lakše prilagođavanje pacijenta stomatološkim intervencijama, što je veoma značajno u dečjoj stomatologiji.
PB  - Srpsko lekarsko društvo, Beograd
T2  - Srpski arhiv za celokupno lekarstvo
T1  - Hard dental tissue minimal-invasive preparation using contemporary polymer rotating instruments and laser
T1  - Minimalno invazivna preparacija čvrstih zubnih tkiva savremenim polimernim rotirajućim instrumentima i laserom
VL  - 142
IS  - 5-6
SP  - 365
EP  - 370
DO  - 10.2298/SARH1406365B
ER  - 
@article{
author = "Beloica, Miloš and Vulićević, Zoran and Mandinić, Zoran and Radović, Ivana and Jovičić, Olivera and Carević, Momir and Tekić, Jasmina",
year = "2014",
abstract = "Goal of contemporary dentistry is to decrease the patient's discomfort during treatment. Dentists aim to achieve maximum with the newly developed dental materials as well as with new cavity preparation techniques in the shortest time span. Since the development of the first constructed borer (drilling machine) for caries removal, the preparation techniques have considerably changed. The progress of dental materials as well as the cavity preparation techniques has led us to contemporary carbide tungsten and diamond borers that are used with obligatory water cooling. The innovation within this field represents newly developed polymer borers that can detect the difference between carious lesions and healthy tooth structure. In this way the cavity preparation may be performed without damaging dental healthy tissue. This is possible owing to their hardness which is lower than the hardness of intact dentin. Polymer borer preparation is painless with less vibration, while the increase in temperature is negligible. Lasers have been used in clinical dentistry since 1980s so it can be said that they represent a new technology. The function of lasers is based on ablation which requires water. Erbium lasers have shown the highest potential with their ability to produce effective ablation of hard dental tissues. Laser application in dentistry requires special training as well as some protective measures. Laser advantages, compared to traditional preparation techniques, involve the absence of vibration, painless preparation, possibility of preparation without anesthetic and easier patient's adjustment to dental intervention which is of importance, especially in pediatric dentistry., Savremena stomatologija teži ka što manjoj traumatizaciji pacijenta prilikom rada uz maksimalni učinak. Savremeni materijali uz nove vidove preparacije kaviteta pružaju mogućnost sanacije karijesnih lezija u najkraćem vremenskom roku. Vidovi preparacije kaviteta su se znatno promenili otkako je uvedeno prvo mašinski napravljeno svrdlo za uklanjanje karijesa. Tehnološki napredak materijala za ispune i načina preparacije doveli su do savremenih karbidnih i dijamantskih svrdla koja se koriste uz obavezno vodeno hlađenje. Inovaciju na polju rotirajućih instrumenata predstavljaju polimerna 'pametna' svrdla, koja uklanjaju karijesnu leziju bez mogućnosti povređivanja i uklanjanja zdrave zubne strukture. Ovo je moguće zahvaljujući čvrstoći koju poseduju, koja je manja od čvrstoće zdravog dentina. Zahvaljujući prirodi materijala od kojih su izrađena, ova svrdla omogućuju bezbolniji rad uz manje vibracija i slabije zagrevanje zubne supstance. Laseri su relativno novo tehnološko sredstvo u stomatologiji, a njihova klinička upotreba počela je osamdesetih godina dvadesetog veka. Laseri funkcionišu po principu ablacije, za šta je neophodno prisustvo vode. Najveći potencijal među ispitivanim laserima pokazali su erbijumski laseri, kojima je moguće uraditi efikasnu ablaciju čvrstih zubnih tkiva. Za korišćenje lasera u stomatologiji neophodni su posebna obuka i odgovarajuće mere zaštite. Prednosti lasera u poređenju sa drugim metodama preparacije čvrstih zubnih tkiva su nepostojanje vibracija, bezbolan rad, mogućnost rada bez anestezije i lakše prilagođavanje pacijenta stomatološkim intervencijama, što je veoma značajno u dečjoj stomatologiji.",
publisher = "Srpsko lekarsko društvo, Beograd",
journal = "Srpski arhiv za celokupno lekarstvo",
title = "Hard dental tissue minimal-invasive preparation using contemporary polymer rotating instruments and laser, Minimalno invazivna preparacija čvrstih zubnih tkiva savremenim polimernim rotirajućim instrumentima i laserom",
volume = "142",
number = "5-6",
pages = "365-370",
doi = "10.2298/SARH1406365B"
}
Beloica, M., Vulićević, Z., Mandinić, Z., Radović, I., Jovičić, O., Carević, M.,& Tekić, J.. (2014). Hard dental tissue minimal-invasive preparation using contemporary polymer rotating instruments and laser. in Srpski arhiv za celokupno lekarstvo
Srpsko lekarsko društvo, Beograd., 142(5-6), 365-370.
https://doi.org/10.2298/SARH1406365B
Beloica M, Vulićević Z, Mandinić Z, Radović I, Jovičić O, Carević M, Tekić J. Hard dental tissue minimal-invasive preparation using contemporary polymer rotating instruments and laser. in Srpski arhiv za celokupno lekarstvo. 2014;142(5-6):365-370.
doi:10.2298/SARH1406365B .
Beloica, Miloš, Vulićević, Zoran, Mandinić, Zoran, Radović, Ivana, Jovičić, Olivera, Carević, Momir, Tekić, Jasmina, "Hard dental tissue minimal-invasive preparation using contemporary polymer rotating instruments and laser" in Srpski arhiv za celokupno lekarstvo, 142, no. 5-6 (2014):365-370,
https://doi.org/10.2298/SARH1406365B . .
1

Push-out bond strength of an experimental self-adhesive resin cement

Juloski, Jelena; Fadda, Giovanni M.; Radović, Ivana; Chieffi, Nicoletta; Vulićević, Zoran; Aragoneses, Juan M.; Ferrari, Marco

(Wiley-Blackwell, Hoboken, 2013)

TY  - JOUR
AU  - Juloski, Jelena
AU  - Fadda, Giovanni M.
AU  - Radović, Ivana
AU  - Chieffi, Nicoletta
AU  - Vulićević, Zoran
AU  - Aragoneses, Juan M.
AU  - Ferrari, Marco
PY  - 2013
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1842
AB  - The adhesion of fiber posts luted with simplified adhesive systems has been a matter of great interest over the past years. The aim of this study was to assess the post retentive potential of experimental self-adhesive resin cement (EXP) when used alone and in combination with a self-etch adhesive. Fiber posts were placed in endodontically treated teeth and divided into four groups (n = 6) according the luting material, as follows: group 1 (EXP alone); group 2 (EXP used with self-etch adhesive); group 3 (marketed dual-cured cement used with self-etch adhesive); and group 4 (marketed self-adhesive cement). The push-out test was used to assess the retentive strength of fiber posts (expressed in MPa), and specimens were analyzed under a stereomicroscope to determine failure mode. The adhesive interface between the cement and root canal dentin for each group was evaluated using scanning electron microscopy. The post retentive potential of group 1 (EXP) (7.48 +/- 4.35 MPa) was comparable with that of marketed cements from group 4 (6.79 +/- 3.68 MPa) and group 3 (8.77 +/- 4.58 MPa). When EXP was used in combination with self-etch adhesive (group 2), significantly higher push-out bond-strength values were measured (15.87 +/- 4.68 MPa) compared with the other groups.
PB  - Wiley-Blackwell, Hoboken
T2  - European Journal of Oral Sciences
T1  - Push-out bond strength of an experimental self-adhesive resin cement
VL  - 121
IS  - 1
SP  - 50
EP  - 56
DO  - 10.1111/eos.12005
ER  - 
@article{
author = "Juloski, Jelena and Fadda, Giovanni M. and Radović, Ivana and Chieffi, Nicoletta and Vulićević, Zoran and Aragoneses, Juan M. and Ferrari, Marco",
year = "2013",
abstract = "The adhesion of fiber posts luted with simplified adhesive systems has been a matter of great interest over the past years. The aim of this study was to assess the post retentive potential of experimental self-adhesive resin cement (EXP) when used alone and in combination with a self-etch adhesive. Fiber posts were placed in endodontically treated teeth and divided into four groups (n = 6) according the luting material, as follows: group 1 (EXP alone); group 2 (EXP used with self-etch adhesive); group 3 (marketed dual-cured cement used with self-etch adhesive); and group 4 (marketed self-adhesive cement). The push-out test was used to assess the retentive strength of fiber posts (expressed in MPa), and specimens were analyzed under a stereomicroscope to determine failure mode. The adhesive interface between the cement and root canal dentin for each group was evaluated using scanning electron microscopy. The post retentive potential of group 1 (EXP) (7.48 +/- 4.35 MPa) was comparable with that of marketed cements from group 4 (6.79 +/- 3.68 MPa) and group 3 (8.77 +/- 4.58 MPa). When EXP was used in combination with self-etch adhesive (group 2), significantly higher push-out bond-strength values were measured (15.87 +/- 4.68 MPa) compared with the other groups.",
publisher = "Wiley-Blackwell, Hoboken",
journal = "European Journal of Oral Sciences",
title = "Push-out bond strength of an experimental self-adhesive resin cement",
volume = "121",
number = "1",
pages = "50-56",
doi = "10.1111/eos.12005"
}
Juloski, J., Fadda, G. M., Radović, I., Chieffi, N., Vulićević, Z., Aragoneses, J. M.,& Ferrari, M.. (2013). Push-out bond strength of an experimental self-adhesive resin cement. in European Journal of Oral Sciences
Wiley-Blackwell, Hoboken., 121(1), 50-56.
https://doi.org/10.1111/eos.12005
Juloski J, Fadda GM, Radović I, Chieffi N, Vulićević Z, Aragoneses JM, Ferrari M. Push-out bond strength of an experimental self-adhesive resin cement. in European Journal of Oral Sciences. 2013;121(1):50-56.
doi:10.1111/eos.12005 .
Juloski, Jelena, Fadda, Giovanni M., Radović, Ivana, Chieffi, Nicoletta, Vulićević, Zoran, Aragoneses, Juan M., Ferrari, Marco, "Push-out bond strength of an experimental self-adhesive resin cement" in European Journal of Oral Sciences, 121, no. 1 (2013):50-56,
https://doi.org/10.1111/eos.12005 . .
7
7
8

Post-retentive ability of new flowable resin composites

Juloski, Jelena; Goracci, Cecilia; Radović, Ivana; Chieffi, Nicoleita; Vichi, Alessandro; Vulićević, Zoran; Ferrari, Marco

(2013)

TY  - JOUR
AU  - Juloski, Jelena
AU  - Goracci, Cecilia
AU  - Radović, Ivana
AU  - Chieffi, Nicoleita
AU  - Vichi, Alessandro
AU  - Vulićević, Zoran
AU  - Ferrari, Marco
PY  - 2013
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1825
AB  - Purpose: To investigate the applicability of flowable composites as post luting agents by assessing the push-out strength of posts. Methods: 36 intact single rooted human premolars were selected. The endodontic treatment was performed and half of the specimens were restored with light transmitting posts (DT Light Post Illusion) and the other half with opaque posts (Tech 21 X-OP). In both groups the following combinations of adhesive/cement were tested: OptiBond Solo Plus/Nexus Third Generation (NX3), XP Bond/SureFil SDR Flow (SDR), and Vertise Flow (VF). Push-out test was used to assess the retentive strength of fiber posts, which was expressed in megapascals (MPa). Specimens were analyzed under a stereomicroscope to determine failure mode (adhesive between luting agent and post, adhesive between luting agent and dentin or mixed failure). Push-out data and failure mode distribution were analyzed by two-way ANOVA and Chi-square test, respectively (P lt  0.05). Results: The statistical analysis revealed that only the type of luting material significantly influenced push-out bond strength of the post (P lt  0.001). SDR (9.00 +/- 2.17 MLPa) performed similarly to the control group NX3 (7.15 +/- 1.74 MPa), while VF (4.81 +/- 1.51 MPa) should significantly lower bond strength. Failure modes differed significantly among groups.
T2  - American Journal of Dentistry
T1  - Post-retentive ability of new flowable resin composites
VL  - 26
IS  - 6
SP  - 324
EP  - 328
UR  - https://hdl.handle.net/21.15107/rcub_smile_1825
ER  - 
@article{
author = "Juloski, Jelena and Goracci, Cecilia and Radović, Ivana and Chieffi, Nicoleita and Vichi, Alessandro and Vulićević, Zoran and Ferrari, Marco",
year = "2013",
abstract = "Purpose: To investigate the applicability of flowable composites as post luting agents by assessing the push-out strength of posts. Methods: 36 intact single rooted human premolars were selected. The endodontic treatment was performed and half of the specimens were restored with light transmitting posts (DT Light Post Illusion) and the other half with opaque posts (Tech 21 X-OP). In both groups the following combinations of adhesive/cement were tested: OptiBond Solo Plus/Nexus Third Generation (NX3), XP Bond/SureFil SDR Flow (SDR), and Vertise Flow (VF). Push-out test was used to assess the retentive strength of fiber posts, which was expressed in megapascals (MPa). Specimens were analyzed under a stereomicroscope to determine failure mode (adhesive between luting agent and post, adhesive between luting agent and dentin or mixed failure). Push-out data and failure mode distribution were analyzed by two-way ANOVA and Chi-square test, respectively (P lt  0.05). Results: The statistical analysis revealed that only the type of luting material significantly influenced push-out bond strength of the post (P lt  0.001). SDR (9.00 +/- 2.17 MLPa) performed similarly to the control group NX3 (7.15 +/- 1.74 MPa), while VF (4.81 +/- 1.51 MPa) should significantly lower bond strength. Failure modes differed significantly among groups.",
journal = "American Journal of Dentistry",
title = "Post-retentive ability of new flowable resin composites",
volume = "26",
number = "6",
pages = "324-328",
url = "https://hdl.handle.net/21.15107/rcub_smile_1825"
}
Juloski, J., Goracci, C., Radović, I., Chieffi, N., Vichi, A., Vulićević, Z.,& Ferrari, M.. (2013). Post-retentive ability of new flowable resin composites. in American Journal of Dentistry, 26(6), 324-328.
https://hdl.handle.net/21.15107/rcub_smile_1825
Juloski J, Goracci C, Radović I, Chieffi N, Vichi A, Vulićević Z, Ferrari M. Post-retentive ability of new flowable resin composites. in American Journal of Dentistry. 2013;26(6):324-328.
https://hdl.handle.net/21.15107/rcub_smile_1825 .
Juloski, Jelena, Goracci, Cecilia, Radović, Ivana, Chieffi, Nicoleita, Vichi, Alessandro, Vulićević, Zoran, Ferrari, Marco, "Post-retentive ability of new flowable resin composites" in American Journal of Dentistry, 26, no. 6 (2013):324-328,
https://hdl.handle.net/21.15107/rcub_smile_1825 .
2
2

Ferrule Effect: A Literature Review

Juloski, Jelena; Radović, Ivana; Goracci, Cecilia; Vulićević, Zoran; Ferrari, Marco

(Elsevier Science Inc, New York, 2012)

TY  - JOUR
AU  - Juloski, Jelena
AU  - Radović, Ivana
AU  - Goracci, Cecilia
AU  - Vulićević, Zoran
AU  - Ferrari, Marco
PY  - 2012
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1695
AB  - Introduction: Preserving intact coronal and radicular tooth structure, especially maintaining cervical tissue to create a ferrule effect, is considered to be crucial for the optimal biomechanical behavior of restored teeth. The ferrule effect has been extensively studied and still remains controversial from many perspectives. The purpose of this study was to summarize the results of research conducted on different issues related to the ferrule effect and published in peer-reviewed journals listed in PubMed. Methods: The search was conducted using the following key words: "ferrule" and "ferrule effect" alone or in combination with "literature review," "fracture resistance," "fatigue," "finite element analysis," and "clinical trials." Results: The findings from reviewed articles were categorized into three main categories: laboratory studies, computer simulation, and clinical trials. Laboratory studies were further classified into subchapters based on the main aspect investigated in relation to the ferrule effect. Conclusions: The presence of a 1.5- to 2-mm ferrule has a positive effect on fracture resistance of endodontically treated teeth. If the clinical situation does not permit a circumferential ferrule, an incomplete ferrule is considered a better option than a complete lack of ferrule. Including a ferrule in preparation design could lead to more favorable fracture patters. Providing an adequate ferrule lowers the impact of the post and core system, luting agents, and the final restoration on tooth performance. In teeth with no coronal structure, in order to provide a ferrule, orthodontic extrusion should be considered rather than surgical crown lengthening. If neither of the alternative methods for providing a ferrule can be performed, available evidence suggests that a poor clinical outcome is very likely. (J Endod 2012;38:11-19)
PB  - Elsevier Science Inc, New York
T2  - Journal of Endodontics
T1  - Ferrule Effect: A Literature Review
VL  - 38
IS  - 1
SP  - 11
EP  - 19
DO  - 10.1016/j.joen.2011.09.024
ER  - 
@article{
author = "Juloski, Jelena and Radović, Ivana and Goracci, Cecilia and Vulićević, Zoran and Ferrari, Marco",
year = "2012",
abstract = "Introduction: Preserving intact coronal and radicular tooth structure, especially maintaining cervical tissue to create a ferrule effect, is considered to be crucial for the optimal biomechanical behavior of restored teeth. The ferrule effect has been extensively studied and still remains controversial from many perspectives. The purpose of this study was to summarize the results of research conducted on different issues related to the ferrule effect and published in peer-reviewed journals listed in PubMed. Methods: The search was conducted using the following key words: "ferrule" and "ferrule effect" alone or in combination with "literature review," "fracture resistance," "fatigue," "finite element analysis," and "clinical trials." Results: The findings from reviewed articles were categorized into three main categories: laboratory studies, computer simulation, and clinical trials. Laboratory studies were further classified into subchapters based on the main aspect investigated in relation to the ferrule effect. Conclusions: The presence of a 1.5- to 2-mm ferrule has a positive effect on fracture resistance of endodontically treated teeth. If the clinical situation does not permit a circumferential ferrule, an incomplete ferrule is considered a better option than a complete lack of ferrule. Including a ferrule in preparation design could lead to more favorable fracture patters. Providing an adequate ferrule lowers the impact of the post and core system, luting agents, and the final restoration on tooth performance. In teeth with no coronal structure, in order to provide a ferrule, orthodontic extrusion should be considered rather than surgical crown lengthening. If neither of the alternative methods for providing a ferrule can be performed, available evidence suggests that a poor clinical outcome is very likely. (J Endod 2012;38:11-19)",
publisher = "Elsevier Science Inc, New York",
journal = "Journal of Endodontics",
title = "Ferrule Effect: A Literature Review",
volume = "38",
number = "1",
pages = "11-19",
doi = "10.1016/j.joen.2011.09.024"
}
Juloski, J., Radović, I., Goracci, C., Vulićević, Z.,& Ferrari, M.. (2012). Ferrule Effect: A Literature Review. in Journal of Endodontics
Elsevier Science Inc, New York., 38(1), 11-19.
https://doi.org/10.1016/j.joen.2011.09.024
Juloski J, Radović I, Goracci C, Vulićević Z, Ferrari M. Ferrule Effect: A Literature Review. in Journal of Endodontics. 2012;38(1):11-19.
doi:10.1016/j.joen.2011.09.024 .
Juloski, Jelena, Radović, Ivana, Goracci, Cecilia, Vulićević, Zoran, Ferrari, Marco, "Ferrule Effect: A Literature Review" in Journal of Endodontics, 38, no. 1 (2012):11-19,
https://doi.org/10.1016/j.joen.2011.09.024 . .
5
185
118
155

Microtensile vs Microshear Bond Strength of All-in-One Adhesives to Unground Enamel

Beloica, Miloš; Goracci, Cecilia; Ramos Carvalho, Carlos Augusto; Radović, Ivana; Margvelashvili, Mariam; Vulićević, Zoran; Ferrari, Marco

(Quintessence Publishing Co Inc, Hanover Park, 2010)

TY  - JOUR
AU  - Beloica, Miloš
AU  - Goracci, Cecilia
AU  - Ramos Carvalho, Carlos Augusto
AU  - Radović, Ivana
AU  - Margvelashvili, Mariam
AU  - Vulićević, Zoran
AU  - Ferrari, Marco
PY  - 2010
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1581
AB  - Purpose To determine the bond strength to unground enamel of all in one adhesives in comparison with an etch and rinse system and to compare the reliability of microtensile and microshear methods in providing such measurements Materials and Methods The bonding procedure was performed on enamel of 64 extracted molars The tested all in one adhesives were Bond Force (Tokuyama), AdheSE One (Ivoclar Vivadent) and Xeno V (Dentsply) Prime&Bond NT (Dentsply) served as control Microtensile specimens were obtained from 4 teeth per group Twelve teeth per group were used for microshear testing Microtensile specimens that failed prior to testing were included in statistical calculations, they were assigned the lowest value measured in the respective group Failure modes were observed under light microscope and classified (cohesive within substrates, adhesive mixed) Statistically significant differences in bond strength were assessed among the adhesives within each testing method and between microshear and microtensile data for each adhesive Failure mode distributions were compared using the chi square test Results All in-one adhesives had similar microshear and microtensile bond strengths In both testing methods, the etch and rinse system achieved the strongest bond For all adhesives significantly higher bond strengths were measured with the microshear test In microtensile testing specimens bonded with the etch and rinse adhesive exhibited a significantly different distribution of failure modes The coefficients of variation were extremely high for microtensile bond strength data, particularly of all in one adhesives Conclusion The adhesive potential to intact enamel of recently introduced all in-one adhesives was inferior to that of an etch and rinse system When testing bond strength to enamel of all in one adhesives, microshear testing may be a more accurate method than microtensile
PB  - Quintessence Publishing Co Inc, Hanover Park
T2  - Journal of Adhesive Dentistry
T1  - Microtensile vs Microshear Bond Strength of All-in-One Adhesives to Unground Enamel
VL  - 12
IS  - 6
SP  - 427
EP  - 433
DO  - 10.3290/j.jad.a18237
ER  - 
@article{
author = "Beloica, Miloš and Goracci, Cecilia and Ramos Carvalho, Carlos Augusto and Radović, Ivana and Margvelashvili, Mariam and Vulićević, Zoran and Ferrari, Marco",
year = "2010",
abstract = "Purpose To determine the bond strength to unground enamel of all in one adhesives in comparison with an etch and rinse system and to compare the reliability of microtensile and microshear methods in providing such measurements Materials and Methods The bonding procedure was performed on enamel of 64 extracted molars The tested all in one adhesives were Bond Force (Tokuyama), AdheSE One (Ivoclar Vivadent) and Xeno V (Dentsply) Prime&Bond NT (Dentsply) served as control Microtensile specimens were obtained from 4 teeth per group Twelve teeth per group were used for microshear testing Microtensile specimens that failed prior to testing were included in statistical calculations, they were assigned the lowest value measured in the respective group Failure modes were observed under light microscope and classified (cohesive within substrates, adhesive mixed) Statistically significant differences in bond strength were assessed among the adhesives within each testing method and between microshear and microtensile data for each adhesive Failure mode distributions were compared using the chi square test Results All in-one adhesives had similar microshear and microtensile bond strengths In both testing methods, the etch and rinse system achieved the strongest bond For all adhesives significantly higher bond strengths were measured with the microshear test In microtensile testing specimens bonded with the etch and rinse adhesive exhibited a significantly different distribution of failure modes The coefficients of variation were extremely high for microtensile bond strength data, particularly of all in one adhesives Conclusion The adhesive potential to intact enamel of recently introduced all in-one adhesives was inferior to that of an etch and rinse system When testing bond strength to enamel of all in one adhesives, microshear testing may be a more accurate method than microtensile",
publisher = "Quintessence Publishing Co Inc, Hanover Park",
journal = "Journal of Adhesive Dentistry",
title = "Microtensile vs Microshear Bond Strength of All-in-One Adhesives to Unground Enamel",
volume = "12",
number = "6",
pages = "427-433",
doi = "10.3290/j.jad.a18237"
}
Beloica, M., Goracci, C., Ramos Carvalho, C. A., Radović, I., Margvelashvili, M., Vulićević, Z.,& Ferrari, M.. (2010). Microtensile vs Microshear Bond Strength of All-in-One Adhesives to Unground Enamel. in Journal of Adhesive Dentistry
Quintessence Publishing Co Inc, Hanover Park., 12(6), 427-433.
https://doi.org/10.3290/j.jad.a18237
Beloica M, Goracci C, Ramos Carvalho CA, Radović I, Margvelashvili M, Vulićević Z, Ferrari M. Microtensile vs Microshear Bond Strength of All-in-One Adhesives to Unground Enamel. in Journal of Adhesive Dentistry. 2010;12(6):427-433.
doi:10.3290/j.jad.a18237 .
Beloica, Miloš, Goracci, Cecilia, Ramos Carvalho, Carlos Augusto, Radović, Ivana, Margvelashvili, Mariam, Vulićević, Zoran, Ferrari, Marco, "Microtensile vs Microshear Bond Strength of All-in-One Adhesives to Unground Enamel" in Journal of Adhesive Dentistry, 12, no. 6 (2010):427-433,
https://doi.org/10.3290/j.jad.a18237 . .
30
24
30

Light transmission through fiber post: The effect on adhesion, elastic modulus and hardness of dual-cure resin cement

Radović, Ivana; Corciolani, Gabriele; Magni, Elisa; Krstanović, Goranka; Pavlović, Vladimir; Vulićević, Zoran; Ferrari, Marco

(Elsevier Sci Ltd, Oxford, 2009)

TY  - JOUR
AU  - Radović, Ivana
AU  - Corciolani, Gabriele
AU  - Magni, Elisa
AU  - Krstanović, Goranka
AU  - Pavlović, Vladimir
AU  - Vulićević, Zoran
AU  - Ferrari, Marco
PY  - 2009
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1487
AB  - Objectives. The aim of this study was to investigate the effect of fiber post light transmitting ability to the continuity of resin cement-root dentin (C-RD) and resin cement-fiber post (C-FP) interface, elastic modulus and hardness of a dual-cure resin cement. Methods. Spectrophotometric measurements were applied for the determination of light transmission at coronal, middle and apical level as well as at the apical tip through Tech 21 X-OP (TECH) and DT Light Post (DT). Posts were cemented using dual-cured resin cement (Calibra). Roots were sectioned longitudinally through the post. Epoxy resin replicas were made and used to evaluate C-RD and C-FP interface under SEM. Modulus of elasticity (E) and Vicker's hardness (VH) of the cement layer were assessed. Results. No light transmission was detected through TECH. Light transmission through DT decreased from coronal to apical and rose at the apical tip. TECH presented a significantly lower percentage of continuous C-RD and C-FP interface in comparison to DT. Coronal third of C-RD interface in TECH specimens had a significantly higher percentage of continuity than apical third. No regional differences in continuity of C-RD interface were found in DT specimens. E and VH were significantly lower when TECH was used, and decreased from coronal to apical for both posts. Significance. Cementation of fiber post with no light transmitting ability using a dual-cured resin cement resulted in lower E and VH of the cement layer, and lower percentage of continuous C-RD and C-FP interface in comparison to cementation of light transmitting fiber post.
PB  - Elsevier Sci Ltd, Oxford
T2  - Dental Materials
T1  - Light transmission through fiber post: The effect on adhesion, elastic modulus and hardness of dual-cure resin cement
VL  - 25
IS  - 7
SP  - 837
EP  - 844
DO  - 10.1016/j.dental.2009.01.004
ER  - 
@article{
author = "Radović, Ivana and Corciolani, Gabriele and Magni, Elisa and Krstanović, Goranka and Pavlović, Vladimir and Vulićević, Zoran and Ferrari, Marco",
year = "2009",
abstract = "Objectives. The aim of this study was to investigate the effect of fiber post light transmitting ability to the continuity of resin cement-root dentin (C-RD) and resin cement-fiber post (C-FP) interface, elastic modulus and hardness of a dual-cure resin cement. Methods. Spectrophotometric measurements were applied for the determination of light transmission at coronal, middle and apical level as well as at the apical tip through Tech 21 X-OP (TECH) and DT Light Post (DT). Posts were cemented using dual-cured resin cement (Calibra). Roots were sectioned longitudinally through the post. Epoxy resin replicas were made and used to evaluate C-RD and C-FP interface under SEM. Modulus of elasticity (E) and Vicker's hardness (VH) of the cement layer were assessed. Results. No light transmission was detected through TECH. Light transmission through DT decreased from coronal to apical and rose at the apical tip. TECH presented a significantly lower percentage of continuous C-RD and C-FP interface in comparison to DT. Coronal third of C-RD interface in TECH specimens had a significantly higher percentage of continuity than apical third. No regional differences in continuity of C-RD interface were found in DT specimens. E and VH were significantly lower when TECH was used, and decreased from coronal to apical for both posts. Significance. Cementation of fiber post with no light transmitting ability using a dual-cured resin cement resulted in lower E and VH of the cement layer, and lower percentage of continuous C-RD and C-FP interface in comparison to cementation of light transmitting fiber post.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Dental Materials",
title = "Light transmission through fiber post: The effect on adhesion, elastic modulus and hardness of dual-cure resin cement",
volume = "25",
number = "7",
pages = "837-844",
doi = "10.1016/j.dental.2009.01.004"
}
Radović, I., Corciolani, G., Magni, E., Krstanović, G., Pavlović, V., Vulićević, Z.,& Ferrari, M.. (2009). Light transmission through fiber post: The effect on adhesion, elastic modulus and hardness of dual-cure resin cement. in Dental Materials
Elsevier Sci Ltd, Oxford., 25(7), 837-844.
https://doi.org/10.1016/j.dental.2009.01.004
Radović I, Corciolani G, Magni E, Krstanović G, Pavlović V, Vulićević Z, Ferrari M. Light transmission through fiber post: The effect on adhesion, elastic modulus and hardness of dual-cure resin cement. in Dental Materials. 2009;25(7):837-844.
doi:10.1016/j.dental.2009.01.004 .
Radović, Ivana, Corciolani, Gabriele, Magni, Elisa, Krstanović, Goranka, Pavlović, Vladimir, Vulićević, Zoran, Ferrari, Marco, "Light transmission through fiber post: The effect on adhesion, elastic modulus and hardness of dual-cure resin cement" in Dental Materials, 25, no. 7 (2009):837-844,
https://doi.org/10.1016/j.dental.2009.01.004 . .
56
45
53

Coupling of composite resin cements to quartz fiber posts: A comparison of industrial and 'chairside' treatments of the post surface

Radović, Ivana; Monticelli, Francesca; Cury, Alvaro Hafiz; Bertelli, Egidio; Vulićević, Zoran; Ferrari, Marco

(2008)

TY  - JOUR
AU  - Radović, Ivana
AU  - Monticelli, Francesca
AU  - Cury, Alvaro Hafiz
AU  - Bertelli, Egidio
AU  - Vulićević, Zoran
AU  - Ferrari, Marco
PY  - 2008
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1443
AB  - Purpose: To evaluate the influence of surface treatments on microtensile bond strength of luting resin cements to fiber posts. Materials and Methods: Forty-two quartz fiber posts (Light Post, RTD) were divided into 7 groups (n = 6) according to the surface treatment. I and 11: experimental patented industrial treatment consisting of zirconium oxide coating and silanization (RTD); III: industrial treatment followed by adhesive application (XPBond, Dentsply Caulk); IV: adhesive (XPBond); V: adhesive (Prime&Bond NT, Dentsply Caulk); VI: silane (Calibra Silane, Dentsply Caulk); VII: no treatment. Adhesives were used in the self-curing mode. Two cements (Sealbond, RTD - group 1, and Calibra, Dentsply Caulk - groups 11 to VII) were applied on the posts to produce cylindrical specimens. Post/cement interfaces were evaluated under SEM. The surface of the industrially coated posts was examined using energy dispersive analysis by x-ray. Cylinders were cut to obtain microtensile sticks that were loaded in tension at a crosshead speed of 0.5 mm/min until failure. Statistical analysis was performed using Kruskal-Wallis analysis of variance followed by Dunn's multiple range test for post-hoc comparisons (p  lt  0.05). Weibull analysis was also performed. Results: The post/cement bond strength was significantly higher on fiber posts treated industrially (I: 23.14 +/- 8.05 MPa; II: 21.56 +/- 7.07 MPa; III: 22.37 +/- 7.00 MPa) or treated with XPBond adhesive (IV: 21.03 +/- 5.34 MPa) when compared to Prime&Bond NT application (V: 14.05 +/- 5.06 MPa), silanization (VI: 6.31 +/- 4.60 MPa) or no treatment (VII: 4.62 +/- 4.31) of conventional fiber posts (p  lt  0.001). Conclusion: The experimental industrial surface treatment and the adhesive application enhanced fiber post to resin cement interfacial strength. Industrial pretreatment may simplify the clinical luting procedure.
T2  - Journal of Adhesive Dentistry
T1  - Coupling of composite resin cements to quartz fiber posts: A comparison of industrial and 'chairside' treatments of the post surface
VL  - 10
IS  - 1
SP  - 57
EP  - 66
UR  - https://hdl.handle.net/21.15107/rcub_smile_1443
ER  - 
@article{
author = "Radović, Ivana and Monticelli, Francesca and Cury, Alvaro Hafiz and Bertelli, Egidio and Vulićević, Zoran and Ferrari, Marco",
year = "2008",
abstract = "Purpose: To evaluate the influence of surface treatments on microtensile bond strength of luting resin cements to fiber posts. Materials and Methods: Forty-two quartz fiber posts (Light Post, RTD) were divided into 7 groups (n = 6) according to the surface treatment. I and 11: experimental patented industrial treatment consisting of zirconium oxide coating and silanization (RTD); III: industrial treatment followed by adhesive application (XPBond, Dentsply Caulk); IV: adhesive (XPBond); V: adhesive (Prime&Bond NT, Dentsply Caulk); VI: silane (Calibra Silane, Dentsply Caulk); VII: no treatment. Adhesives were used in the self-curing mode. Two cements (Sealbond, RTD - group 1, and Calibra, Dentsply Caulk - groups 11 to VII) were applied on the posts to produce cylindrical specimens. Post/cement interfaces were evaluated under SEM. The surface of the industrially coated posts was examined using energy dispersive analysis by x-ray. Cylinders were cut to obtain microtensile sticks that were loaded in tension at a crosshead speed of 0.5 mm/min until failure. Statistical analysis was performed using Kruskal-Wallis analysis of variance followed by Dunn's multiple range test for post-hoc comparisons (p  lt  0.05). Weibull analysis was also performed. Results: The post/cement bond strength was significantly higher on fiber posts treated industrially (I: 23.14 +/- 8.05 MPa; II: 21.56 +/- 7.07 MPa; III: 22.37 +/- 7.00 MPa) or treated with XPBond adhesive (IV: 21.03 +/- 5.34 MPa) when compared to Prime&Bond NT application (V: 14.05 +/- 5.06 MPa), silanization (VI: 6.31 +/- 4.60 MPa) or no treatment (VII: 4.62 +/- 4.31) of conventional fiber posts (p  lt  0.001). Conclusion: The experimental industrial surface treatment and the adhesive application enhanced fiber post to resin cement interfacial strength. Industrial pretreatment may simplify the clinical luting procedure.",
journal = "Journal of Adhesive Dentistry",
title = "Coupling of composite resin cements to quartz fiber posts: A comparison of industrial and 'chairside' treatments of the post surface",
volume = "10",
number = "1",
pages = "57-66",
url = "https://hdl.handle.net/21.15107/rcub_smile_1443"
}
Radović, I., Monticelli, F., Cury, A. H., Bertelli, E., Vulićević, Z.,& Ferrari, M.. (2008). Coupling of composite resin cements to quartz fiber posts: A comparison of industrial and 'chairside' treatments of the post surface. in Journal of Adhesive Dentistry, 10(1), 57-66.
https://hdl.handle.net/21.15107/rcub_smile_1443
Radović I, Monticelli F, Cury AH, Bertelli E, Vulićević Z, Ferrari M. Coupling of composite resin cements to quartz fiber posts: A comparison of industrial and 'chairside' treatments of the post surface. in Journal of Adhesive Dentistry. 2008;10(1):57-66.
https://hdl.handle.net/21.15107/rcub_smile_1443 .
Radović, Ivana, Monticelli, Francesca, Cury, Alvaro Hafiz, Bertelli, Egidio, Vulićević, Zoran, Ferrari, Marco, "Coupling of composite resin cements to quartz fiber posts: A comparison of industrial and 'chairside' treatments of the post surface" in Journal of Adhesive Dentistry, 10, no. 1 (2008):57-66,
https://hdl.handle.net/21.15107/rcub_smile_1443 .
8
8

Surface treatments for improving bond strength to prefabricated fiber posts: A literature review

Monticelli, Francesca; Osorio, Raquel; Sadek, F. T.; Radović, Ivana; Toledano, Manuel; Ferrari, Marco

(Operative Dentistry Inc, Indianapolis, 2008)

TY  - JOUR
AU  - Monticelli, Francesca
AU  - Osorio, Raquel
AU  - Sadek, F. T.
AU  - Radović, Ivana
AU  - Toledano, Manuel
AU  - Ferrari, Marco
PY  - 2008
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1430
AB  - This literature review summarizes the research on fiber post surface treatments and provides information related to their benefit in enhancing bond strength to composites, based on the results of original scientific full papers from peer-reviewed journals listed in Pub Med. The search was conducted using the terms "fiber post," "surface treatment" "surface conditioning," "etching" and "sandblasting." A consistent number of in vitro studies that investigated the surface treatment of fiber posts in an attempt to improve bond strength have been published to date. Their results have been summarized in the following categories: chemical treatments and micromechanical treatments of fiber post surfaces (or a combination of both principles). The majority of available literature data is based on studies that investigated different "chairside" post superficial treatments. According to the in vitro results, surface conditioning improves fiber post bonding properties, and the bond strength of pre-treated fiber posts to restorative materials is satisfactory. Long-term clinical studies are needed prior to making a general recommendation for their use.
PB  - Operative Dentistry Inc, Indianapolis
T2  - Operative Dentistry
T1  - Surface treatments for improving bond strength to prefabricated fiber posts: A literature review
VL  - 33
IS  - 3
SP  - 346
EP  - 355
DO  - 10.2341/07-86
ER  - 
@article{
author = "Monticelli, Francesca and Osorio, Raquel and Sadek, F. T. and Radović, Ivana and Toledano, Manuel and Ferrari, Marco",
year = "2008",
abstract = "This literature review summarizes the research on fiber post surface treatments and provides information related to their benefit in enhancing bond strength to composites, based on the results of original scientific full papers from peer-reviewed journals listed in Pub Med. The search was conducted using the terms "fiber post," "surface treatment" "surface conditioning," "etching" and "sandblasting." A consistent number of in vitro studies that investigated the surface treatment of fiber posts in an attempt to improve bond strength have been published to date. Their results have been summarized in the following categories: chemical treatments and micromechanical treatments of fiber post surfaces (or a combination of both principles). The majority of available literature data is based on studies that investigated different "chairside" post superficial treatments. According to the in vitro results, surface conditioning improves fiber post bonding properties, and the bond strength of pre-treated fiber posts to restorative materials is satisfactory. Long-term clinical studies are needed prior to making a general recommendation for their use.",
publisher = "Operative Dentistry Inc, Indianapolis",
journal = "Operative Dentistry",
title = "Surface treatments for improving bond strength to prefabricated fiber posts: A literature review",
volume = "33",
number = "3",
pages = "346-355",
doi = "10.2341/07-86"
}
Monticelli, F., Osorio, R., Sadek, F. T., Radović, I., Toledano, M.,& Ferrari, M.. (2008). Surface treatments for improving bond strength to prefabricated fiber posts: A literature review. in Operative Dentistry
Operative Dentistry Inc, Indianapolis., 33(3), 346-355.
https://doi.org/10.2341/07-86
Monticelli F, Osorio R, Sadek FT, Radović I, Toledano M, Ferrari M. Surface treatments for improving bond strength to prefabricated fiber posts: A literature review. in Operative Dentistry. 2008;33(3):346-355.
doi:10.2341/07-86 .
Monticelli, Francesca, Osorio, Raquel, Sadek, F. T., Radović, Ivana, Toledano, Manuel, Ferrari, Marco, "Surface treatments for improving bond strength to prefabricated fiber posts: A literature review" in Operative Dentistry, 33, no. 3 (2008):346-355,
https://doi.org/10.2341/07-86 . .
105
71
83

Post space cleaning using a new nickel titanium endodontic drill combined with different cleaning regimens

Coniglio, Ivanovic; Magni, Elisa; Goracci, Cecilia; Radović, Ivana; Carvalho, Carlos Augusto; Grandini, Simone; Ferrari, Marco

(Elsevier Science Inc, New York, 2008)

TY  - JOUR
AU  - Coniglio, Ivanovic
AU  - Magni, Elisa
AU  - Goracci, Cecilia
AU  - Radović, Ivana
AU  - Carvalho, Carlos Augusto
AU  - Grandini, Simone
AU  - Ferrari, Marco
PY  - 2008
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1424
AB  - This study compared the effect of two drills and five cleaning regimens on post space debridement. One hundred extracted premolars were instrumented and obturated with warm vertical compaction of gutta percha. The teeth were divided into two groups according to the drill used to remove gutta percha/sealer and for post space preparation: a Largo drill (Largo; Dentsply, St Quentin en Yvelines, France) or a MTwo-PF drill (Sweden&Martina, Due Carrare, Padova, Italy). The following cleaning regimens were used: EDTA, ultrasonics, ultrasonics + EDTA, phosphoric acid, and distilled water. Scanning electron microscopic images of the post spaces were taken, and the presence of debris and of open dentin tubules were evaluated. The ultrasonics + EDTA, phosphoric acid, and EDTA groups were comparable in open tubules scores for both drills and in debris scores after the use of MTwo-PF (p > 0.05). The ultrasonics and control groups performed significantly worse (p  lt  0.05). The MTwo-PF drill resulted as effective as the Largo drill in obtaining a good post space cleaning, especially when followed by ultrasonics + EDTA irrigant regimen.
PB  - Elsevier Science Inc, New York
T2  - Journal of Endodontics
T1  - Post space cleaning using a new nickel titanium endodontic drill combined with different cleaning regimens
VL  - 34
IS  - 1
SP  - 83
EP  - 86
DO  - 10.1016/j.joen.2007.10.019
ER  - 
@article{
author = "Coniglio, Ivanovic and Magni, Elisa and Goracci, Cecilia and Radović, Ivana and Carvalho, Carlos Augusto and Grandini, Simone and Ferrari, Marco",
year = "2008",
abstract = "This study compared the effect of two drills and five cleaning regimens on post space debridement. One hundred extracted premolars were instrumented and obturated with warm vertical compaction of gutta percha. The teeth were divided into two groups according to the drill used to remove gutta percha/sealer and for post space preparation: a Largo drill (Largo; Dentsply, St Quentin en Yvelines, France) or a MTwo-PF drill (Sweden&Martina, Due Carrare, Padova, Italy). The following cleaning regimens were used: EDTA, ultrasonics, ultrasonics + EDTA, phosphoric acid, and distilled water. Scanning electron microscopic images of the post spaces were taken, and the presence of debris and of open dentin tubules were evaluated. The ultrasonics + EDTA, phosphoric acid, and EDTA groups were comparable in open tubules scores for both drills and in debris scores after the use of MTwo-PF (p > 0.05). The ultrasonics and control groups performed significantly worse (p  lt  0.05). The MTwo-PF drill resulted as effective as the Largo drill in obtaining a good post space cleaning, especially when followed by ultrasonics + EDTA irrigant regimen.",
publisher = "Elsevier Science Inc, New York",
journal = "Journal of Endodontics",
title = "Post space cleaning using a new nickel titanium endodontic drill combined with different cleaning regimens",
volume = "34",
number = "1",
pages = "83-86",
doi = "10.1016/j.joen.2007.10.019"
}
Coniglio, I., Magni, E., Goracci, C., Radović, I., Carvalho, C. A., Grandini, S.,& Ferrari, M.. (2008). Post space cleaning using a new nickel titanium endodontic drill combined with different cleaning regimens. in Journal of Endodontics
Elsevier Science Inc, New York., 34(1), 83-86.
https://doi.org/10.1016/j.joen.2007.10.019
Coniglio I, Magni E, Goracci C, Radović I, Carvalho CA, Grandini S, Ferrari M. Post space cleaning using a new nickel titanium endodontic drill combined with different cleaning regimens. in Journal of Endodontics. 2008;34(1):83-86.
doi:10.1016/j.joen.2007.10.019 .
Coniglio, Ivanovic, Magni, Elisa, Goracci, Cecilia, Radović, Ivana, Carvalho, Carlos Augusto, Grandini, Simone, Ferrari, Marco, "Post space cleaning using a new nickel titanium endodontic drill combined with different cleaning regimens" in Journal of Endodontics, 34, no. 1 (2008):83-86,
https://doi.org/10.1016/j.joen.2007.10.019 . .
34
33
38

Microtensile bond strength of self-etching adhesives to dentin

Vulićević, Zoran; Radović, Ivana; Krstanović, Goranka; Mandić, Jelena; Cury, Alvaro Hafiz; Ferrari, Marco

(Savez inženjera metalurgije Srbije, Beograd, 2008)

TY  - JOUR
AU  - Vulićević, Zoran
AU  - Radović, Ivana
AU  - Krstanović, Goranka
AU  - Mandić, Jelena
AU  - Cury, Alvaro Hafiz
AU  - Ferrari, Marco
PY  - 2008
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1404
AB  - The aim of this study was to determine micro tensile bond strength of two and one-step self-etching adhesive systems to dentin. 25 intact human third molars were used. Flat surfaces of mid-coronal dentin were exposed and the teeth were divided into 5 groups (n=5). Composite build-ups were made using the following self-etching systems / composite materials: 2-step self-etching system Contax / Ecusphere Carat (DMG), 2-step self-etching system AdheSE / Tetric Ceram (Ivoclar Vivadent), 1-step 2-components self etching system Futurabond NR / Grandio (Voco) and 1-step 1-component self-etching adhesive G Bond / Gradia Direct (GC Corp.). Two-step etch-and-rinse system PQ Clear with Amelogen Universal composite resin (Ultra dent) was used in the control group. Bond strength was assessed with the non-trimming micro tensile technique. Statistical analysis was performed using the 1-way ANOVA, followed by the Tukey test for post-hoc comparisons (p lt 0.05). Investigated self-etching systems showed satisfactory values of micro tensile bond strength to dentin after 24 hours. Two-step self-etching system AdheSE resulted in significantly higher bond strength than all the other groups (p lt 0.001). Micro tensile bond strength of self-etching systems Contax, Futurabond NR and G Bond was comparable to the etch-and-rinse system PQ Clear. .
AB  - Cilj rada bio je da se odredi jačina veze dvofaznih i jednofaznih samonagrizajućih adhezivnih sistema sa dentinom. Površine dentina su eksponirane na 25 intaktnih trećih molara i zubi su podeljeni u 5 grupa (n=5). Izrađene su kompozitne nadogradnje korišćenjem sledećih samonagrizajućih adheziva / kompozitnih materijala: dvofazni samonagrizajući sistem Contax / Ecusphere Carat (DMG), dvofazni samonagrizajući sistem AdheSE / Tetric Ceram (Ivoclar Vivadent), jednofazni dvokomponentni samonagrizajući sistem Futurabond NR / Grandio (Voco) i jednofazni jednokomponentni samonagrizajući sistem G Bond / Gradia Direct (GC Corp.). Dvofazni adhezivni sistem sa potpunim nagrizanjem PQ Clear sa Amelogen Universal kompozitnim materijalom (Ultradent) korišćen je u kontrolnoj grupi. Jačina veze određena je testom otpornosti mikrouzoraka na kidanje. Rezultati su statistički analizirani jednofaktorskom analizom varijanse (ANOVA) i Tukey testom (p lt 0.05). Ispitivani samonagrizajući sistemi pokazali su zadovoljavajuće vrednosti jačine veze sa dentinom nakon 24 časa. Jačina veze dvofaznog samonagrizajućeg sistema AdheSE bila je značajno viša nego jačina veze u ostalim grupama (p lt 0.001). Jačine veze samonagrizajućih sistema Contax, Futurabond NR i G Bond nisu se statistički značajno razlikovale od jačine veze sistema sa potpunim nagrizanjem PQ Clear. .
PB  - Savez inženjera metalurgije Srbije, Beograd
T2  - Metalurgija
T1  - Microtensile bond strength of self-etching adhesives to dentin
VL  - 14
IS  - 2
SP  - 101
EP  - 109
UR  - https://hdl.handle.net/21.15107/rcub_smile_1404
ER  - 
@article{
author = "Vulićević, Zoran and Radović, Ivana and Krstanović, Goranka and Mandić, Jelena and Cury, Alvaro Hafiz and Ferrari, Marco",
year = "2008",
abstract = "The aim of this study was to determine micro tensile bond strength of two and one-step self-etching adhesive systems to dentin. 25 intact human third molars were used. Flat surfaces of mid-coronal dentin were exposed and the teeth were divided into 5 groups (n=5). Composite build-ups were made using the following self-etching systems / composite materials: 2-step self-etching system Contax / Ecusphere Carat (DMG), 2-step self-etching system AdheSE / Tetric Ceram (Ivoclar Vivadent), 1-step 2-components self etching system Futurabond NR / Grandio (Voco) and 1-step 1-component self-etching adhesive G Bond / Gradia Direct (GC Corp.). Two-step etch-and-rinse system PQ Clear with Amelogen Universal composite resin (Ultra dent) was used in the control group. Bond strength was assessed with the non-trimming micro tensile technique. Statistical analysis was performed using the 1-way ANOVA, followed by the Tukey test for post-hoc comparisons (p lt 0.05). Investigated self-etching systems showed satisfactory values of micro tensile bond strength to dentin after 24 hours. Two-step self-etching system AdheSE resulted in significantly higher bond strength than all the other groups (p lt 0.001). Micro tensile bond strength of self-etching systems Contax, Futurabond NR and G Bond was comparable to the etch-and-rinse system PQ Clear. ., Cilj rada bio je da se odredi jačina veze dvofaznih i jednofaznih samonagrizajućih adhezivnih sistema sa dentinom. Površine dentina su eksponirane na 25 intaktnih trećih molara i zubi su podeljeni u 5 grupa (n=5). Izrađene su kompozitne nadogradnje korišćenjem sledećih samonagrizajućih adheziva / kompozitnih materijala: dvofazni samonagrizajući sistem Contax / Ecusphere Carat (DMG), dvofazni samonagrizajući sistem AdheSE / Tetric Ceram (Ivoclar Vivadent), jednofazni dvokomponentni samonagrizajući sistem Futurabond NR / Grandio (Voco) i jednofazni jednokomponentni samonagrizajući sistem G Bond / Gradia Direct (GC Corp.). Dvofazni adhezivni sistem sa potpunim nagrizanjem PQ Clear sa Amelogen Universal kompozitnim materijalom (Ultradent) korišćen je u kontrolnoj grupi. Jačina veze određena je testom otpornosti mikrouzoraka na kidanje. Rezultati su statistički analizirani jednofaktorskom analizom varijanse (ANOVA) i Tukey testom (p lt 0.05). Ispitivani samonagrizajući sistemi pokazali su zadovoljavajuće vrednosti jačine veze sa dentinom nakon 24 časa. Jačina veze dvofaznog samonagrizajućeg sistema AdheSE bila je značajno viša nego jačina veze u ostalim grupama (p lt 0.001). Jačine veze samonagrizajućih sistema Contax, Futurabond NR i G Bond nisu se statistički značajno razlikovale od jačine veze sistema sa potpunim nagrizanjem PQ Clear. .",
publisher = "Savez inženjera metalurgije Srbije, Beograd",
journal = "Metalurgija",
title = "Microtensile bond strength of self-etching adhesives to dentin",
volume = "14",
number = "2",
pages = "101-109",
url = "https://hdl.handle.net/21.15107/rcub_smile_1404"
}
Vulićević, Z., Radović, I., Krstanović, G., Mandić, J., Cury, A. H.,& Ferrari, M.. (2008). Microtensile bond strength of self-etching adhesives to dentin. in Metalurgija
Savez inženjera metalurgije Srbije, Beograd., 14(2), 101-109.
https://hdl.handle.net/21.15107/rcub_smile_1404
Vulićević Z, Radović I, Krstanović G, Mandić J, Cury AH, Ferrari M. Microtensile bond strength of self-etching adhesives to dentin. in Metalurgija. 2008;14(2):101-109.
https://hdl.handle.net/21.15107/rcub_smile_1404 .
Vulićević, Zoran, Radović, Ivana, Krstanović, Goranka, Mandić, Jelena, Cury, Alvaro Hafiz, Ferrari, Marco, "Microtensile bond strength of self-etching adhesives to dentin" in Metalurgija, 14, no. 2 (2008):101-109,
https://hdl.handle.net/21.15107/rcub_smile_1404 .

Flowable composites as intermediate agents without adhesive application in resin composite repair

Papacchini, Federica; Radović, Ivana; Magni, Elisa; Goracci, Cecilia; Monticelli, Francesca; Chieffi, Nicoletta; Polimeni, Antonella; Ferrari, Marco

(Mosher and Linder, Inc, 2008)

TY  - JOUR
AU  - Papacchini, Federica
AU  - Radović, Ivana
AU  - Magni, Elisa
AU  - Goracci, Cecilia
AU  - Monticelli, Francesca
AU  - Chieffi, Nicoletta
AU  - Polimeni, Antonella
AU  - Ferrari, Marco
PY  - 2008
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1396
AB  - Purpose: To evaluate the effect of different intermediate resin agents on composite-to-composite microtensile bond strength (mu TBS). Methods: Composite disks (8 x 4 mm) of Gradia Direct Anterior (N= 15) and Filtek Supreme XT (N=15), stored in a saline solution at 37 degrees C for I month, were sandblasted (Microetcher, 50 mu m-Al2O3), cleaned (35% H3PO4), and randomly divided into five groups (N=3) according to the intermediate agent applied. Two flowable composites (Gradia LoFlo; Filtek Supreme XT Flow) and two adhesives (Adper Scotchbond 1XT, Scotchbond Multi-Purpose) were used. As a control, no intermediate agent was applied., Each disk was incrementally repaired (W mm) with the same resin as the respective substrate. By serially cutting each repaired specimen, multiple sticks of about 0.8 mm(2) in cross-section were obtained and loaded in tension until failure at a cross-head speed of 0.5 mm/minute. Data were statistically analyzed. Failure mode was examined by stereo- and scanning electron-microscopy (SEM). Additional specimens were prepared to morphologically evaluate the composite-to-composite interfacial quality by SEM analysis. Results: Composite substrate and intermediate agent were significant factors (Two-way ANOVA, P lt  0.001). Bond strengths achieved with Gradia Direct Anterior were higher than Hick Supreme XT. The application of flowable composites resulted in statistically superior mu TBS than adhesives and control (Tukey test, P lt  0.001). Failure mode was predominantly cohesive (flowable composites), cohesive/adhesive (adhesives) and adhesive (no treatment). Flowable composites and adhesives showed a good interfacial quality.
PB  - Mosher and Linder, Inc
T2  - American Journal of Dentistry
T1  - Flowable composites as intermediate agents without adhesive application in resin composite repair
VL  - 21
IS  - 1
SP  - 53
EP  - 58
UR  - https://hdl.handle.net/21.15107/rcub_smile_1396
ER  - 
@article{
author = "Papacchini, Federica and Radović, Ivana and Magni, Elisa and Goracci, Cecilia and Monticelli, Francesca and Chieffi, Nicoletta and Polimeni, Antonella and Ferrari, Marco",
year = "2008",
abstract = "Purpose: To evaluate the effect of different intermediate resin agents on composite-to-composite microtensile bond strength (mu TBS). Methods: Composite disks (8 x 4 mm) of Gradia Direct Anterior (N= 15) and Filtek Supreme XT (N=15), stored in a saline solution at 37 degrees C for I month, were sandblasted (Microetcher, 50 mu m-Al2O3), cleaned (35% H3PO4), and randomly divided into five groups (N=3) according to the intermediate agent applied. Two flowable composites (Gradia LoFlo; Filtek Supreme XT Flow) and two adhesives (Adper Scotchbond 1XT, Scotchbond Multi-Purpose) were used. As a control, no intermediate agent was applied., Each disk was incrementally repaired (W mm) with the same resin as the respective substrate. By serially cutting each repaired specimen, multiple sticks of about 0.8 mm(2) in cross-section were obtained and loaded in tension until failure at a cross-head speed of 0.5 mm/minute. Data were statistically analyzed. Failure mode was examined by stereo- and scanning electron-microscopy (SEM). Additional specimens were prepared to morphologically evaluate the composite-to-composite interfacial quality by SEM analysis. Results: Composite substrate and intermediate agent were significant factors (Two-way ANOVA, P lt  0.001). Bond strengths achieved with Gradia Direct Anterior were higher than Hick Supreme XT. The application of flowable composites resulted in statistically superior mu TBS than adhesives and control (Tukey test, P lt  0.001). Failure mode was predominantly cohesive (flowable composites), cohesive/adhesive (adhesives) and adhesive (no treatment). Flowable composites and adhesives showed a good interfacial quality.",
publisher = "Mosher and Linder, Inc",
journal = "American Journal of Dentistry",
title = "Flowable composites as intermediate agents without adhesive application in resin composite repair",
volume = "21",
number = "1",
pages = "53-58",
url = "https://hdl.handle.net/21.15107/rcub_smile_1396"
}
Papacchini, F., Radović, I., Magni, E., Goracci, C., Monticelli, F., Chieffi, N., Polimeni, A.,& Ferrari, M.. (2008). Flowable composites as intermediate agents without adhesive application in resin composite repair. in American Journal of Dentistry
Mosher and Linder, Inc., 21(1), 53-58.
https://hdl.handle.net/21.15107/rcub_smile_1396
Papacchini F, Radović I, Magni E, Goracci C, Monticelli F, Chieffi N, Polimeni A, Ferrari M. Flowable composites as intermediate agents without adhesive application in resin composite repair. in American Journal of Dentistry. 2008;21(1):53-58.
https://hdl.handle.net/21.15107/rcub_smile_1396 .
Papacchini, Federica, Radović, Ivana, Magni, Elisa, Goracci, Cecilia, Monticelli, Francesca, Chieffi, Nicoletta, Polimeni, Antonella, Ferrari, Marco, "Flowable composites as intermediate agents without adhesive application in resin composite repair" in American Journal of Dentistry, 21, no. 1 (2008):53-58,
https://hdl.handle.net/21.15107/rcub_smile_1396 .
19
24

Self-adhesive resin cements: A literature review

Radović, Ivana; Monticelli, Francesca; Goracci, Cecilia; Vulićević, Zoran; Ferrari, Marco

(2008)

TY  - JOUR
AU  - Radović, Ivana
AU  - Monticelli, Francesca
AU  - Goracci, Cecilia
AU  - Vulićević, Zoran
AU  - Ferrari, Marco
PY  - 2008
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1391
AB  - Purpose: To summarize research conducted on self-adhesive cements and provide information on their properties, based on the results of original scientific full-length papers from peer-reviewed journals listed in PubMed. Materials and Methods: The search was conducted using the term "self-adhesive cement OR (trade names of currently available products)". Results: Only in vitro studies that investigated two commercially available self-adhesive cements have been published so far. The results were summarized into the following categories: adhesion to tooth substrates (enamel, dentin, root dentin), adhesion to restorative materials (endodontic posts, ceramics, titanium abutments), marginal adaptation, microleakage, mechanical properties, biocompatibility, chemical adhesion and fluoride release, and ratings in clinical use. Conclusion: The majority of available literature data is based on studies that investigated one of the self-adhesive cements that are currently available to clinicians. According to the in vitro results, self-adhesive cement adhesion to dentin and various restorative materials is satisfactory and comparable to other multistep resin cements, while adhesion to enamel appears to be a weak link in their bonding properties. Long-term clinical performance of these materials needs to be assessed prior to making a general recommendation for their use.
T2  - Journal of Adhesive Dentistry
T1  - Self-adhesive resin cements: A literature review
VL  - 10
IS  - 4
SP  - 251
EP  - 258
UR  - https://hdl.handle.net/21.15107/rcub_smile_1391
ER  - 
@article{
author = "Radović, Ivana and Monticelli, Francesca and Goracci, Cecilia and Vulićević, Zoran and Ferrari, Marco",
year = "2008",
abstract = "Purpose: To summarize research conducted on self-adhesive cements and provide information on their properties, based on the results of original scientific full-length papers from peer-reviewed journals listed in PubMed. Materials and Methods: The search was conducted using the term "self-adhesive cement OR (trade names of currently available products)". Results: Only in vitro studies that investigated two commercially available self-adhesive cements have been published so far. The results were summarized into the following categories: adhesion to tooth substrates (enamel, dentin, root dentin), adhesion to restorative materials (endodontic posts, ceramics, titanium abutments), marginal adaptation, microleakage, mechanical properties, biocompatibility, chemical adhesion and fluoride release, and ratings in clinical use. Conclusion: The majority of available literature data is based on studies that investigated one of the self-adhesive cements that are currently available to clinicians. According to the in vitro results, self-adhesive cement adhesion to dentin and various restorative materials is satisfactory and comparable to other multistep resin cements, while adhesion to enamel appears to be a weak link in their bonding properties. Long-term clinical performance of these materials needs to be assessed prior to making a general recommendation for their use.",
journal = "Journal of Adhesive Dentistry",
title = "Self-adhesive resin cements: A literature review",
volume = "10",
number = "4",
pages = "251-258",
url = "https://hdl.handle.net/21.15107/rcub_smile_1391"
}
Radović, I., Monticelli, F., Goracci, C., Vulićević, Z.,& Ferrari, M.. (2008). Self-adhesive resin cements: A literature review. in Journal of Adhesive Dentistry, 10(4), 251-258.
https://hdl.handle.net/21.15107/rcub_smile_1391
Radović I, Monticelli F, Goracci C, Vulićević Z, Ferrari M. Self-adhesive resin cements: A literature review. in Journal of Adhesive Dentistry. 2008;10(4):251-258.
https://hdl.handle.net/21.15107/rcub_smile_1391 .
Radović, Ivana, Monticelli, Francesca, Goracci, Cecilia, Vulićević, Zoran, Ferrari, Marco, "Self-adhesive resin cements: A literature review" in Journal of Adhesive Dentistry, 10, no. 4 (2008):251-258,
https://hdl.handle.net/21.15107/rcub_smile_1391 .
287
358

Evaluation of the adhesion of fiber posts cemented using different adhesive approaches

Radović, Ivana; Mazzitelli, Claudia; Chieffi, Nicoletta; Ferrari, Marco

(Wiley-Blackwell, Malden, 2008)

TY  - JOUR
AU  - Radović, Ivana
AU  - Mazzitelli, Claudia
AU  - Chieffi, Nicoletta
AU  - Ferrari, Marco
PY  - 2008
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1383
AB  - The aim of this study was to investigate the adhesion of fiber posts cemented with luting agents that utilize three currently available adhesive approaches: etch-and-rinse, self-etch, and self-adhesive. Forty-two intact single-rooted human premolars were used in the study. Teeth were divided into six groups. In each group, a different resin cement with its adhesive system (if needed) and a fiber post were used. The groups were classified, according to the adhesive approach, into the following three categories. (i) Etch-and-rinse groups: Calibra resin cement/XPBond adhesive + self-curing activator (SCA)/RadiX Fiber Post (Dentsply Caulk), FluoroCore 2 core build-up material/XPBond + SCA/RadiX Fiber Post (Dentsply Caulk), and MultiCore Flow luting and core build-up material/Excite DSC adhesive/FRC Postec Plus fiber post (Ivoclar Vivadent). (ii) Self-etch group: Panavia F 2.0/ED primer (Kuraray)/RadiX Fiber Post (Dentsply Caulk). (iii) Self-adhesive groups: experimental self-adhesive cement/RadiX Fiber Post (Dentsply Caulk), and RelyX Unicem/RelyX Fiber Post (3M ESPE). The adhesion between the post and the root canal walls was assessed using the 'thin-slice' push-out test. In the test arrangement used, the self-etching approach may offer less favourable adhesion to root canal dentin in comparison with etch-and-rinse and self-adhesive approaches.
PB  - Wiley-Blackwell, Malden
T2  - European Journal of Oral Sciences
T1  - Evaluation of the adhesion of fiber posts cemented using different adhesive approaches
VL  - 116
IS  - 6
SP  - 557
EP  - 563
DO  - 10.1111/j.1600-0722.2008.00577.x
ER  - 
@article{
author = "Radović, Ivana and Mazzitelli, Claudia and Chieffi, Nicoletta and Ferrari, Marco",
year = "2008",
abstract = "The aim of this study was to investigate the adhesion of fiber posts cemented with luting agents that utilize three currently available adhesive approaches: etch-and-rinse, self-etch, and self-adhesive. Forty-two intact single-rooted human premolars were used in the study. Teeth were divided into six groups. In each group, a different resin cement with its adhesive system (if needed) and a fiber post were used. The groups were classified, according to the adhesive approach, into the following three categories. (i) Etch-and-rinse groups: Calibra resin cement/XPBond adhesive + self-curing activator (SCA)/RadiX Fiber Post (Dentsply Caulk), FluoroCore 2 core build-up material/XPBond + SCA/RadiX Fiber Post (Dentsply Caulk), and MultiCore Flow luting and core build-up material/Excite DSC adhesive/FRC Postec Plus fiber post (Ivoclar Vivadent). (ii) Self-etch group: Panavia F 2.0/ED primer (Kuraray)/RadiX Fiber Post (Dentsply Caulk). (iii) Self-adhesive groups: experimental self-adhesive cement/RadiX Fiber Post (Dentsply Caulk), and RelyX Unicem/RelyX Fiber Post (3M ESPE). The adhesion between the post and the root canal walls was assessed using the 'thin-slice' push-out test. In the test arrangement used, the self-etching approach may offer less favourable adhesion to root canal dentin in comparison with etch-and-rinse and self-adhesive approaches.",
publisher = "Wiley-Blackwell, Malden",
journal = "European Journal of Oral Sciences",
title = "Evaluation of the adhesion of fiber posts cemented using different adhesive approaches",
volume = "116",
number = "6",
pages = "557-563",
doi = "10.1111/j.1600-0722.2008.00577.x"
}
Radović, I., Mazzitelli, C., Chieffi, N.,& Ferrari, M.. (2008). Evaluation of the adhesion of fiber posts cemented using different adhesive approaches. in European Journal of Oral Sciences
Wiley-Blackwell, Malden., 116(6), 557-563.
https://doi.org/10.1111/j.1600-0722.2008.00577.x
Radović I, Mazzitelli C, Chieffi N, Ferrari M. Evaluation of the adhesion of fiber posts cemented using different adhesive approaches. in European Journal of Oral Sciences. 2008;116(6):557-563.
doi:10.1111/j.1600-0722.2008.00577.x .
Radović, Ivana, Mazzitelli, Claudia, Chieffi, Nicoletta, Ferrari, Marco, "Evaluation of the adhesion of fiber posts cemented using different adhesive approaches" in European Journal of Oral Sciences, 116, no. 6 (2008):557-563,
https://doi.org/10.1111/j.1600-0722.2008.00577.x . .
86
75
86

Fracture resistance of fiber posts: Combinations of several small posts vs. standardized single post

Porciani, Pier F.; Vano, Michele; Radović, Ivana; Goracci, Cecilia; Grandini, Simone; Garcia-Godoy, Franklin; Ferrari, Marco

(2008)

TY  - JOUR
AU  - Porciani, Pier F.
AU  - Vano, Michele
AU  - Radović, Ivana
AU  - Goracci, Cecilia
AU  - Grandini, Simone
AU  - Garcia-Godoy, Franklin
AU  - Ferrari, Marco
PY  - 2008
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1379
AB  - Purpose: To determine the fracture resistance of different sizes of standardized single fiber posts and the combinations of multiple small experimental posts. Methods: Single posts in three different sizes (l, 2 and 3; DT Light Posts, RTD; DT), as control, and seven different combinations of experimental small posts (Abrasive Technology), reproducing the sizes of several endodontic files were cemented in endodontic resin blocks. The combinations of small posts were made combining 2-4 small posts so as to reach the sizes of standardized DT posts. The posts were loaded at an angle of 45 to the long axis of the block using a crosshead speed of 1 mm/minute until specimen failure. Ten posts/combinations were tested. Statistical analysis was performed using one-way ANOVA followed by Tamhane test for the post hoc comparisons (P lt  0.05). Results: For the single posts, fracture resistance increased when increasing the diameter of the post. The use of multiple posts resulted in fracture resistances comparable to that of the single post for two of the three diameters studied (DT1 and DT2). For the largest diameter (DT3), the use of multiple posts resulted in lower fracture resistances than did the single post. (Am J Dent 2008;21:373-376).
T2  - American Journal of Dentistry
T1  - Fracture resistance of fiber posts: Combinations of several small posts vs. standardized single post
VL  - 21
IS  - 6
SP  - 373
EP  - 376
UR  - https://hdl.handle.net/21.15107/rcub_smile_1379
ER  - 
@article{
author = "Porciani, Pier F. and Vano, Michele and Radović, Ivana and Goracci, Cecilia and Grandini, Simone and Garcia-Godoy, Franklin and Ferrari, Marco",
year = "2008",
abstract = "Purpose: To determine the fracture resistance of different sizes of standardized single fiber posts and the combinations of multiple small experimental posts. Methods: Single posts in three different sizes (l, 2 and 3; DT Light Posts, RTD; DT), as control, and seven different combinations of experimental small posts (Abrasive Technology), reproducing the sizes of several endodontic files were cemented in endodontic resin blocks. The combinations of small posts were made combining 2-4 small posts so as to reach the sizes of standardized DT posts. The posts were loaded at an angle of 45 to the long axis of the block using a crosshead speed of 1 mm/minute until specimen failure. Ten posts/combinations were tested. Statistical analysis was performed using one-way ANOVA followed by Tamhane test for the post hoc comparisons (P lt  0.05). Results: For the single posts, fracture resistance increased when increasing the diameter of the post. The use of multiple posts resulted in fracture resistances comparable to that of the single post for two of the three diameters studied (DT1 and DT2). For the largest diameter (DT3), the use of multiple posts resulted in lower fracture resistances than did the single post. (Am J Dent 2008;21:373-376).",
journal = "American Journal of Dentistry",
title = "Fracture resistance of fiber posts: Combinations of several small posts vs. standardized single post",
volume = "21",
number = "6",
pages = "373-376",
url = "https://hdl.handle.net/21.15107/rcub_smile_1379"
}
Porciani, P. F., Vano, M., Radović, I., Goracci, C., Grandini, S., Garcia-Godoy, F.,& Ferrari, M.. (2008). Fracture resistance of fiber posts: Combinations of several small posts vs. standardized single post. in American Journal of Dentistry, 21(6), 373-376.
https://hdl.handle.net/21.15107/rcub_smile_1379
Porciani PF, Vano M, Radović I, Goracci C, Grandini S, Garcia-Godoy F, Ferrari M. Fracture resistance of fiber posts: Combinations of several small posts vs. standardized single post. in American Journal of Dentistry. 2008;21(6):373-376.
https://hdl.handle.net/21.15107/rcub_smile_1379 .
Porciani, Pier F., Vano, Michele, Radović, Ivana, Goracci, Cecilia, Grandini, Simone, Garcia-Godoy, Franklin, Ferrari, Marco, "Fracture resistance of fiber posts: Combinations of several small posts vs. standardized single post" in American Journal of Dentistry, 21, no. 6 (2008):373-376,
https://hdl.handle.net/21.15107/rcub_smile_1379 .
13
17

Effect of curing modes of dual-curing luting systems and root regions on retention of translucent fiber posts in root canals

Zhang, Ling; Magni, Elisa; Radović, Ivana; Wang, Ying-jie; Chen, Ji-hua; Ferrari, Marco

(2008)

TY  - JOUR
AU  - Zhang, Ling
AU  - Magni, Elisa
AU  - Radović, Ivana
AU  - Wang, Ying-jie
AU  - Chen, Ji-hua
AU  - Ferrari, Marco
PY  - 2008
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1378
AB  - Purpose: To evaluate the effect of different curing modes of dual-curing luting systems and root regions on the pushout strength of fiber posts to intraradicular dentin. Materials and Methods: Forty-two extracted premolars with a single root canal were sectioned at the cementoenamel junction and the roots were enclodontically treated. The roots were divided into two groups according to two dual-curing luting systems: (1) XP BOND-Dual Cure/Calibra resin cement; (2) XP BOND-Dual Cure/FluoroCore 2. For each luting system, three different curing modes were applied to the dentin adhesive and resin cement: "Self-cure and Self-cure (SC&SC)", "Self-cure and Dual-cure (SC&DC)", and "Dual-cure and Dual-cure (DC&DC)". Translucent Easy fiber posts (Dentsply Maillefer) were luted in the roots. A thin-slice push-out test was performed, and the data of push-out strength were analyzed using three-way ANOVA with luting system, curing mode, and root region (apical, middle and coronal) as factors. Tukey's test was used for post-hoc comparisons. Results: The push-out strength of XP BOND-Dual Cure/Calibra was significantly lower when Calibra resin cement was self-cured than when it was dual-cured (SC&SC: 6.04 +/- 2.65 MPa; SC&DC: 10.69 +/- 3.01 MPa; DC&DC: 10.72 +/- 3.63 MPa; p  lt  0.05). The curing modes did not affect the push-out strength of XP BOND-Dual Cure/FluoroCore 2 (SC&SC: 7.90 +/- 3.94 MPa; SC&DC: 8.32 +/- 2.73 MPa; DC&DC: 9.27 +/- 4.12 MPa; p > 0.05). The Coronal push-out strength was significantly higher than the apical push-out strength (p  lt  0.05). Conclusion: Retention of fiber posts in root canals was affected by the curing modes of dual-curing luting system and root regions.
T2  - Journal of Adhesive Dentistry
T1  - Effect of curing modes of dual-curing luting systems and root regions on retention of translucent fiber posts in root canals
VL  - 10
IS  - 3
SP  - 219
EP  - 226
UR  - https://hdl.handle.net/21.15107/rcub_smile_1378
ER  - 
@article{
author = "Zhang, Ling and Magni, Elisa and Radović, Ivana and Wang, Ying-jie and Chen, Ji-hua and Ferrari, Marco",
year = "2008",
abstract = "Purpose: To evaluate the effect of different curing modes of dual-curing luting systems and root regions on the pushout strength of fiber posts to intraradicular dentin. Materials and Methods: Forty-two extracted premolars with a single root canal were sectioned at the cementoenamel junction and the roots were enclodontically treated. The roots were divided into two groups according to two dual-curing luting systems: (1) XP BOND-Dual Cure/Calibra resin cement; (2) XP BOND-Dual Cure/FluoroCore 2. For each luting system, three different curing modes were applied to the dentin adhesive and resin cement: "Self-cure and Self-cure (SC&SC)", "Self-cure and Dual-cure (SC&DC)", and "Dual-cure and Dual-cure (DC&DC)". Translucent Easy fiber posts (Dentsply Maillefer) were luted in the roots. A thin-slice push-out test was performed, and the data of push-out strength were analyzed using three-way ANOVA with luting system, curing mode, and root region (apical, middle and coronal) as factors. Tukey's test was used for post-hoc comparisons. Results: The push-out strength of XP BOND-Dual Cure/Calibra was significantly lower when Calibra resin cement was self-cured than when it was dual-cured (SC&SC: 6.04 +/- 2.65 MPa; SC&DC: 10.69 +/- 3.01 MPa; DC&DC: 10.72 +/- 3.63 MPa; p  lt  0.05). The curing modes did not affect the push-out strength of XP BOND-Dual Cure/FluoroCore 2 (SC&SC: 7.90 +/- 3.94 MPa; SC&DC: 8.32 +/- 2.73 MPa; DC&DC: 9.27 +/- 4.12 MPa; p > 0.05). The Coronal push-out strength was significantly higher than the apical push-out strength (p  lt  0.05). Conclusion: Retention of fiber posts in root canals was affected by the curing modes of dual-curing luting system and root regions.",
journal = "Journal of Adhesive Dentistry",
title = "Effect of curing modes of dual-curing luting systems and root regions on retention of translucent fiber posts in root canals",
volume = "10",
number = "3",
pages = "219-226",
url = "https://hdl.handle.net/21.15107/rcub_smile_1378"
}
Zhang, L., Magni, E., Radović, I., Wang, Y., Chen, J.,& Ferrari, M.. (2008). Effect of curing modes of dual-curing luting systems and root regions on retention of translucent fiber posts in root canals. in Journal of Adhesive Dentistry, 10(3), 219-226.
https://hdl.handle.net/21.15107/rcub_smile_1378
Zhang L, Magni E, Radović I, Wang Y, Chen J, Ferrari M. Effect of curing modes of dual-curing luting systems and root regions on retention of translucent fiber posts in root canals. in Journal of Adhesive Dentistry. 2008;10(3):219-226.
https://hdl.handle.net/21.15107/rcub_smile_1378 .
Zhang, Ling, Magni, Elisa, Radović, Ivana, Wang, Ying-jie, Chen, Ji-hua, Ferrari, Marco, "Effect of curing modes of dual-curing luting systems and root regions on retention of translucent fiber posts in root canals" in Journal of Adhesive Dentistry, 10, no. 3 (2008):219-226,
https://hdl.handle.net/21.15107/rcub_smile_1378 .
13
13

Long-term retrospective study of the clinical performance of fiber posts

Ferrari, Marco; Cagidiaco, Maria Crysanti; Goracci, Cecilia; Vichi, Alessandro; Mason, Pier Nicola; Radović, Ivana; Tay, Franklin

(2007)

TY  - JOUR
AU  - Ferrari, Marco
AU  - Cagidiaco, Maria Crysanti
AU  - Goracci, Cecilia
AU  - Vichi, Alessandro
AU  - Mason, Pier Nicola
AU  - Radović, Ivana
AU  - Tay, Franklin
PY  - 2007
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1373
AB  - To retrospectively evaluate the long-term clinical performance of three types of fiber posts after a service period of 7-11 years. Methods: 985 posts were included in the study: 615 Composiposts, 160 Estethic Posts and 210)Esthetic Plus Posts were placed into endodontically treated teeth. Four combinations of dentin adhesives/luting materials were used. Endodontic and prosthodontic results were recorded. Results: A 7-11 % failure rate was recorded for the three types of posts. A total of 79 failures were recorded: 39 due to endodontic reasons, one root fracture, one fiber post fracture, 17 crown dislodgements and 21 due to post debonding. The mechanical failures were always related to the lack of coronal tooth structure. The results indicated that fiber posts in combination with bonding/luting materials may be used routinely for restoring endodontically treated teeth. Mechanical failure of restored teeth with fiber posts can be related to the amount of residual coronal structure.
T2  - American Journal of Dentistry
T1  - Long-term retrospective study of the clinical performance of fiber posts
VL  - 20
IS  - 5
SP  - 287
EP  - 291
UR  - https://hdl.handle.net/21.15107/rcub_smile_1373
ER  - 
@article{
author = "Ferrari, Marco and Cagidiaco, Maria Crysanti and Goracci, Cecilia and Vichi, Alessandro and Mason, Pier Nicola and Radović, Ivana and Tay, Franklin",
year = "2007",
abstract = "To retrospectively evaluate the long-term clinical performance of three types of fiber posts after a service period of 7-11 years. Methods: 985 posts were included in the study: 615 Composiposts, 160 Estethic Posts and 210)Esthetic Plus Posts were placed into endodontically treated teeth. Four combinations of dentin adhesives/luting materials were used. Endodontic and prosthodontic results were recorded. Results: A 7-11 % failure rate was recorded for the three types of posts. A total of 79 failures were recorded: 39 due to endodontic reasons, one root fracture, one fiber post fracture, 17 crown dislodgements and 21 due to post debonding. The mechanical failures were always related to the lack of coronal tooth structure. The results indicated that fiber posts in combination with bonding/luting materials may be used routinely for restoring endodontically treated teeth. Mechanical failure of restored teeth with fiber posts can be related to the amount of residual coronal structure.",
journal = "American Journal of Dentistry",
title = "Long-term retrospective study of the clinical performance of fiber posts",
volume = "20",
number = "5",
pages = "287-291",
url = "https://hdl.handle.net/21.15107/rcub_smile_1373"
}
Ferrari, M., Cagidiaco, M. C., Goracci, C., Vichi, A., Mason, P. N., Radović, I.,& Tay, F.. (2007). Long-term retrospective study of the clinical performance of fiber posts. in American Journal of Dentistry, 20(5), 287-291.
https://hdl.handle.net/21.15107/rcub_smile_1373
Ferrari M, Cagidiaco MC, Goracci C, Vichi A, Mason PN, Radović I, Tay F. Long-term retrospective study of the clinical performance of fiber posts. in American Journal of Dentistry. 2007;20(5):287-291.
https://hdl.handle.net/21.15107/rcub_smile_1373 .
Ferrari, Marco, Cagidiaco, Maria Crysanti, Goracci, Cecilia, Vichi, Alessandro, Mason, Pier Nicola, Radović, Ivana, Tay, Franklin, "Long-term retrospective study of the clinical performance of fiber posts" in American Journal of Dentistry, 20, no. 5 (2007):287-291,
https://hdl.handle.net/21.15107/rcub_smile_1373 .
146
184

Clinical performance of fiber post restorations in endodontically treated teeth: 2-Year results

Cagidiaco, Maria Crysanti; Radović, Ivana; Simonetti, Marco; Tay, Franklin; Ferrari, Marco

(2007)

TY  - CONF
AU  - Cagidiaco, Maria Crysanti
AU  - Radović, Ivana
AU  - Simonetti, Marco
AU  - Tay, Franklin
AU  - Ferrari, Marco
PY  - 2007
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1372
AB  - Purpose: This study evaluated the 2-year outcome of post-and-core restorative procedures in endodontically treated teeth. The effect of baseline factors (tooth type, number of residual coronal walls, and type of definitive restoration) on restoration failure was assessed. Materials and Methods: The consecutive sample design included 150 patients. A total of 162 teeth (57 anterior and 105 posterior) were restored. Sixty-nine teeth had 3 or 4 residual coronal walls, while 93 teeth had 2 or fewer walls. Crowns and direct resin composite restorations were placed in 121 and 41 teeth, respectively. After 23 to 25 months, all patients were evaluated. Logistic regression was used to identify the joint effect of variables recorded at baseline (P  lt  .05). Results: The only failure modes observed were post debonding (4.3%, 2 in anterior teeth and 5 in posterior teeth) and endodontic failure (3.0%, 2 in anterior teeth and 3 in posterior teeth). All post debondings occurred in teeth with 2 or fewer coronal walls that were crown covered, All endodontic failures occurred in crown-covered teeth (1 failure in a tooth with 3 walls and the remaining 4 failures in teeth with 2 or fewer walls). Logistic regression found no statistical significance for any of the variables recorded at baseline. Conclusion: Restorations placed with the use of a fiber post and core resulted in 4.3% post debondings and 3.0% endodontic failures after 2 years of clinical service.
C3  - International Journal of Prosthodontics
T1  - Clinical performance of fiber post restorations in endodontically treated teeth: 2-Year results
VL  - 20
IS  - 3
SP  - 293
EP  - 298
UR  - https://hdl.handle.net/21.15107/rcub_smile_1372
ER  - 
@conference{
author = "Cagidiaco, Maria Crysanti and Radović, Ivana and Simonetti, Marco and Tay, Franklin and Ferrari, Marco",
year = "2007",
abstract = "Purpose: This study evaluated the 2-year outcome of post-and-core restorative procedures in endodontically treated teeth. The effect of baseline factors (tooth type, number of residual coronal walls, and type of definitive restoration) on restoration failure was assessed. Materials and Methods: The consecutive sample design included 150 patients. A total of 162 teeth (57 anterior and 105 posterior) were restored. Sixty-nine teeth had 3 or 4 residual coronal walls, while 93 teeth had 2 or fewer walls. Crowns and direct resin composite restorations were placed in 121 and 41 teeth, respectively. After 23 to 25 months, all patients were evaluated. Logistic regression was used to identify the joint effect of variables recorded at baseline (P  lt  .05). Results: The only failure modes observed were post debonding (4.3%, 2 in anterior teeth and 5 in posterior teeth) and endodontic failure (3.0%, 2 in anterior teeth and 3 in posterior teeth). All post debondings occurred in teeth with 2 or fewer coronal walls that were crown covered, All endodontic failures occurred in crown-covered teeth (1 failure in a tooth with 3 walls and the remaining 4 failures in teeth with 2 or fewer walls). Logistic regression found no statistical significance for any of the variables recorded at baseline. Conclusion: Restorations placed with the use of a fiber post and core resulted in 4.3% post debondings and 3.0% endodontic failures after 2 years of clinical service.",
journal = "International Journal of Prosthodontics",
title = "Clinical performance of fiber post restorations in endodontically treated teeth: 2-Year results",
volume = "20",
number = "3",
pages = "293-298",
url = "https://hdl.handle.net/21.15107/rcub_smile_1372"
}
Cagidiaco, M. C., Radović, I., Simonetti, M., Tay, F.,& Ferrari, M.. (2007). Clinical performance of fiber post restorations in endodontically treated teeth: 2-Year results. in International Journal of Prosthodontics, 20(3), 293-298.
https://hdl.handle.net/21.15107/rcub_smile_1372
Cagidiaco MC, Radović I, Simonetti M, Tay F, Ferrari M. Clinical performance of fiber post restorations in endodontically treated teeth: 2-Year results. in International Journal of Prosthodontics. 2007;20(3):293-298.
https://hdl.handle.net/21.15107/rcub_smile_1372 .
Cagidiaco, Maria Crysanti, Radović, Ivana, Simonetti, Marco, Tay, Franklin, Ferrari, Marco, "Clinical performance of fiber post restorations in endodontically treated teeth: 2-Year results" in International Journal of Prosthodontics, 20, no. 3 (2007):293-298,
https://hdl.handle.net/21.15107/rcub_smile_1372 .
68
81

Effect of air-drying temperature on the effectiveness of silane primers and coupling blends in the repair of a microhybrid resin composite

Papacchini, Federica; Monticelli, Francesca; Hasa, Irida; Radović, Ivana; Fabianelli, Andrea; Polimeni, Antonella; Ferrari, Marco

(2007)

TY  - JOUR
AU  - Papacchini, Federica
AU  - Monticelli, Francesca
AU  - Hasa, Irida
AU  - Radović, Ivana
AU  - Fabianelli, Andrea
AU  - Polimeni, Antonella
AU  - Ferrari, Marco
PY  - 2007
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1362
AB  - Purpose: To evaluate the effect of different silane agents and air-drying temperatures on the repair strength of a microfilled hybrid composite. Materials and Methods: Composite cylinders (8 x 4 mm) of Gradia Direct Anterior (GC, N = 36), stored in a saline solution at 37 degrees C for 1 month, were sandblasted (50-mu m aluminium oxide), cleaned (35% phosphoric acid) and randomly divided into six groups (n = 6). Two prehydrolyzed silane primers (Monobond-S, lvoclar-Vivadent, Porcelain Primer, Bisco), a non prehydrolyzed silane primer (Porcelain Liner M, Sun Medical) and three silane/adhesive coupling agents (Porcelain Bond Activator-PBA/Clearfil New Bond, PBA/Clearfil SE Bond, PBA/Clearfil Tri-S Bond, Kuraray) were investigated. Siiane-coated surfaces were air dried at two different temperatures (23 degrees C and 38 degrees C) and repairs (8 x 8 mm) were fabricated (Gradia Direct Anterior). Unrepaired composite cylinders (8 x 8 mm, n = 6) were used as control to evaluate the cohesive strength of the material. Microtensile bond strength measurements (mu TBS) were performed. Results: The silane agent applied (p  lt  0.001), the airdrying temperature (p  lt  0.001) and their interaction (p  lt  0.001) were significant factors (two-way ANOVA, Tukey test; p  lt  0.05). Silane primers achieved inferior mu TBS when air dried at 23 degrees C as compared to silane/adhesive blends. Warm air-drying was significantly beneficial to composite repairs mediated by silane primers. Comparable results were achieved by silane/adhesive couplings at 23 degrees C and 38 degrees C. At 38 degrees C all the intermediate agents resulted in repair mu TBS that were comparable to the 24-h cohesive strength of the composite (one-way ANOVA, Dunnett t-tests; p  lt  0.05). Conclusion: The chemical interactions between silane primers and compozite substrate may be optimized through warm airdrying. Silane/adhesive couplings were not influenced by the air drying temperature.
T2  - Journal of Adhesive Dentistry
T1  - Effect of air-drying temperature on the effectiveness of silane primers and coupling blends in the repair of a microhybrid resin composite
VL  - 9
IS  - 4
SP  - 391
EP  - 397
UR  - https://hdl.handle.net/21.15107/rcub_smile_1362
ER  - 
@article{
author = "Papacchini, Federica and Monticelli, Francesca and Hasa, Irida and Radović, Ivana and Fabianelli, Andrea and Polimeni, Antonella and Ferrari, Marco",
year = "2007",
abstract = "Purpose: To evaluate the effect of different silane agents and air-drying temperatures on the repair strength of a microfilled hybrid composite. Materials and Methods: Composite cylinders (8 x 4 mm) of Gradia Direct Anterior (GC, N = 36), stored in a saline solution at 37 degrees C for 1 month, were sandblasted (50-mu m aluminium oxide), cleaned (35% phosphoric acid) and randomly divided into six groups (n = 6). Two prehydrolyzed silane primers (Monobond-S, lvoclar-Vivadent, Porcelain Primer, Bisco), a non prehydrolyzed silane primer (Porcelain Liner M, Sun Medical) and three silane/adhesive coupling agents (Porcelain Bond Activator-PBA/Clearfil New Bond, PBA/Clearfil SE Bond, PBA/Clearfil Tri-S Bond, Kuraray) were investigated. Siiane-coated surfaces were air dried at two different temperatures (23 degrees C and 38 degrees C) and repairs (8 x 8 mm) were fabricated (Gradia Direct Anterior). Unrepaired composite cylinders (8 x 8 mm, n = 6) were used as control to evaluate the cohesive strength of the material. Microtensile bond strength measurements (mu TBS) were performed. Results: The silane agent applied (p  lt  0.001), the airdrying temperature (p  lt  0.001) and their interaction (p  lt  0.001) were significant factors (two-way ANOVA, Tukey test; p  lt  0.05). Silane primers achieved inferior mu TBS when air dried at 23 degrees C as compared to silane/adhesive blends. Warm air-drying was significantly beneficial to composite repairs mediated by silane primers. Comparable results were achieved by silane/adhesive couplings at 23 degrees C and 38 degrees C. At 38 degrees C all the intermediate agents resulted in repair mu TBS that were comparable to the 24-h cohesive strength of the composite (one-way ANOVA, Dunnett t-tests; p  lt  0.05). Conclusion: The chemical interactions between silane primers and compozite substrate may be optimized through warm airdrying. Silane/adhesive couplings were not influenced by the air drying temperature.",
journal = "Journal of Adhesive Dentistry",
title = "Effect of air-drying temperature on the effectiveness of silane primers and coupling blends in the repair of a microhybrid resin composite",
volume = "9",
number = "4",
pages = "391-397",
url = "https://hdl.handle.net/21.15107/rcub_smile_1362"
}
Papacchini, F., Monticelli, F., Hasa, I., Radović, I., Fabianelli, A., Polimeni, A.,& Ferrari, M.. (2007). Effect of air-drying temperature on the effectiveness of silane primers and coupling blends in the repair of a microhybrid resin composite. in Journal of Adhesive Dentistry, 9(4), 391-397.
https://hdl.handle.net/21.15107/rcub_smile_1362
Papacchini F, Monticelli F, Hasa I, Radović I, Fabianelli A, Polimeni A, Ferrari M. Effect of air-drying temperature on the effectiveness of silane primers and coupling blends in the repair of a microhybrid resin composite. in Journal of Adhesive Dentistry. 2007;9(4):391-397.
https://hdl.handle.net/21.15107/rcub_smile_1362 .
Papacchini, Federica, Monticelli, Francesca, Hasa, Irida, Radović, Ivana, Fabianelli, Andrea, Polimeni, Antonella, Ferrari, Marco, "Effect of air-drying temperature on the effectiveness of silane primers and coupling blends in the repair of a microhybrid resin composite" in Journal of Adhesive Dentistry, 9, no. 4 (2007):391-397,
https://hdl.handle.net/21.15107/rcub_smile_1362 .
15
14

Adhesion between fiber posts and resin luting agents: A microtensile bond strength test and an SEM investigation following different treatments of the post surface

Magni, Elisa; Mazzitelli, Claudia; Papacchini, Federica; Radović, Ivana; Goracci, Cecilia; Coniglio, Ivanovic; Ferrari, Marco

(2007)

TY  - JOUR
AU  - Magni, Elisa
AU  - Mazzitelli, Claudia
AU  - Papacchini, Federica
AU  - Radović, Ivana
AU  - Goracci, Cecilia
AU  - Coniglio, Ivanovic
AU  - Ferrari, Marco
PY  - 2007
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1359
AB  - Purpose: (1) To evaluate the interfacial strength between FRC Postec posts and three luting agents (Multilink, Variolink 11, and MultiCore Flow) following different surface treatments, and (2) to observe the effect of sandblasting (Rocatec Pre) on the surface morphology of methacrylate-based fiber posts. Materials and Methods: The posts received one of the following surface treatments: (1) sandblasting, (2) sandblasting + silanization, (3) silanization or (4) no treatment. The three luting agents were bonded to the post and the post-cement bond strength was evaluated with the microtensile test. SEM observation of sandblasted and nontreated posts was performed. Post-cement interfaces were also evaluated. Data were statistically analyzed with two-Way ANOVA with post treatment and luting agent as factors. Tukey's test was applied for post-hoc comparisons. Results: Post treatment and the interaction between type of luting agent and type of post treatment were significant factors for bond strength (p  lt  0.001). The type of luting agent did not significantly influence bond strength (p = 0.07). Sandblasting + silanization performed better than sandblasting or no treatment (p  lt  0.001). Silanization resulted in significantly higher bond strengths than no treatment (p = 0.045). No differences were detected between sandblasting + silanization and silanization. SEM observation revealed an increased surface roughness and exposure of fibers in sandblasted posts. Conclusion: Silanization was confirmed to be a reliable method for improving the bond strength of resin luting agents to fiber posts. Bond strength of resin luting agents to fiber posts was not influenced by the type of luting agent. The sandblasting procedure modified the methacrylate-based post surface texture.
T2  - Journal of Adhesive Dentistry
T1  - Adhesion between fiber posts and resin luting agents: A microtensile bond strength test and an SEM investigation following different treatments of the post surface
VL  - 9
IS  - 2
SP  - 195
EP  - 202
UR  - https://hdl.handle.net/21.15107/rcub_smile_1359
ER  - 
@article{
author = "Magni, Elisa and Mazzitelli, Claudia and Papacchini, Federica and Radović, Ivana and Goracci, Cecilia and Coniglio, Ivanovic and Ferrari, Marco",
year = "2007",
abstract = "Purpose: (1) To evaluate the interfacial strength between FRC Postec posts and three luting agents (Multilink, Variolink 11, and MultiCore Flow) following different surface treatments, and (2) to observe the effect of sandblasting (Rocatec Pre) on the surface morphology of methacrylate-based fiber posts. Materials and Methods: The posts received one of the following surface treatments: (1) sandblasting, (2) sandblasting + silanization, (3) silanization or (4) no treatment. The three luting agents were bonded to the post and the post-cement bond strength was evaluated with the microtensile test. SEM observation of sandblasted and nontreated posts was performed. Post-cement interfaces were also evaluated. Data were statistically analyzed with two-Way ANOVA with post treatment and luting agent as factors. Tukey's test was applied for post-hoc comparisons. Results: Post treatment and the interaction between type of luting agent and type of post treatment were significant factors for bond strength (p  lt  0.001). The type of luting agent did not significantly influence bond strength (p = 0.07). Sandblasting + silanization performed better than sandblasting or no treatment (p  lt  0.001). Silanization resulted in significantly higher bond strengths than no treatment (p = 0.045). No differences were detected between sandblasting + silanization and silanization. SEM observation revealed an increased surface roughness and exposure of fibers in sandblasted posts. Conclusion: Silanization was confirmed to be a reliable method for improving the bond strength of resin luting agents to fiber posts. Bond strength of resin luting agents to fiber posts was not influenced by the type of luting agent. The sandblasting procedure modified the methacrylate-based post surface texture.",
journal = "Journal of Adhesive Dentistry",
title = "Adhesion between fiber posts and resin luting agents: A microtensile bond strength test and an SEM investigation following different treatments of the post surface",
volume = "9",
number = "2",
pages = "195-202",
url = "https://hdl.handle.net/21.15107/rcub_smile_1359"
}
Magni, E., Mazzitelli, C., Papacchini, F., Radović, I., Goracci, C., Coniglio, I.,& Ferrari, M.. (2007). Adhesion between fiber posts and resin luting agents: A microtensile bond strength test and an SEM investigation following different treatments of the post surface. in Journal of Adhesive Dentistry, 9(2), 195-202.
https://hdl.handle.net/21.15107/rcub_smile_1359
Magni E, Mazzitelli C, Papacchini F, Radović I, Goracci C, Coniglio I, Ferrari M. Adhesion between fiber posts and resin luting agents: A microtensile bond strength test and an SEM investigation following different treatments of the post surface. in Journal of Adhesive Dentistry. 2007;9(2):195-202.
https://hdl.handle.net/21.15107/rcub_smile_1359 .
Magni, Elisa, Mazzitelli, Claudia, Papacchini, Federica, Radović, Ivana, Goracci, Cecilia, Coniglio, Ivanovic, Ferrari, Marco, "Adhesion between fiber posts and resin luting agents: A microtensile bond strength test and an SEM investigation following different treatments of the post surface" in Journal of Adhesive Dentistry, 9, no. 2 (2007):195-202,
https://hdl.handle.net/21.15107/rcub_smile_1359 .
39
42