TY  - JOUR
AU  - Lapčević, Ana
AU  - Jevremović, Danimir
AU  - Trifković, Branka
AU  - Santoši, Željko
AU  - Vukelić, Đorđe
PY  - 2015
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/2067
AB  - Daily progress of dentistry, especially in the field of prosthodontics is introducing new materials and technologies. With the increasing need for aesthetically acceptable and non-metal materials, it came to development and improvement of ceramic materials and computer based systems (CA). The patient came in order to compensate the missing left lateral incisor. Since the adjacent teeth are brushed and the print was taken, casted model has been scanned using 3Shape D800 laboratory scanner. Dental restoration has been designed using 3Shape DentalSystem Premium software and the available tools. After completing the virtual design, the data are sent to the program responsible for CAM Zenotec® mini CAD/CAM device. As a result, the compensation with the full morphology was obtained without the need for finishing works.
AB  - Stomatologija, posebno stomatološka protetika svakodnevno napreduje uvođenjem novih materijala i tehnologija. Kako se javlja sve veća potreba za estetski prihvatljivim i bezmetalnim materijalima, došlo je do razvoja i unapređenja keramičkih materijala i računarima podržanih sistema (CA). Pacijent se javio radi nadoknade nedostajućeg levog bočnog sekutića. Pošto su susedni zubi zbrušeni i uzet otisak, izliven je model koji je skeniran pomoću 3Shape D 800 laboratorijskog skenera. Zubna nadoknada je dizajnirana pomo ću 3Shape DentalSystem Premium softvera korišćenjem raspoloživih alata. Nakon završenog dizajna virtuelni podaci su poslati u program odgovoran za CAM Zenotec® mini CAD/CAM uređaja. Kao rezultat, dobijena je nadoknada pune morfologije bez potrebe za dorađivanjem.
PB  - Univerzitet u Novom Sadu - Fakultet tehničkih nauka - Departman za proizvodno mašinstvo, Novi Sad
T2  - Journal of Production Engineering
T1  - Application of CAD/CAM technology in the design and creation of full anatomic bridge form zirconium dioxide
T1  - Primena CAD/CAM tehnologije u projektovanju i izradi mostova pune anatomske forme na bazi cirkonijum-dioksida
VL  - 18
IS  - 1
SP  - 73
EP  - 75
UR  - https://hdl.handle.net/21.15107/rcub_smile_2067
ER  - 

@article{
author = "Lapčević, Ana and Jevremović, Danimir and Trifković, Branka and Santoši, Željko and Vukelić, Đorđe",
year = "2015",
abstract = "Daily progress of dentistry, especially in the field of prosthodontics is introducing new materials and technologies. With the increasing need for aesthetically acceptable and non-metal materials, it came to development and improvement of ceramic materials and computer based systems (CA). The patient came in order to compensate the missing left lateral incisor. Since the adjacent teeth are brushed and the print was taken, casted model has been scanned using 3Shape D800 laboratory scanner. Dental restoration has been designed using 3Shape DentalSystem Premium software and the available tools. After completing the virtual design, the data are sent to the program responsible for CAM Zenotec® mini CAD/CAM device. As a result, the compensation with the full morphology was obtained without the need for finishing works., Stomatologija, posebno stomatološka protetika svakodnevno napreduje uvođenjem novih materijala i tehnologija. Kako se javlja sve veća potreba za estetski prihvatljivim i bezmetalnim materijalima, došlo je do razvoja i unapređenja keramičkih materijala i računarima podržanih sistema (CA). Pacijent se javio radi nadoknade nedostajućeg levog bočnog sekutića. Pošto su susedni zubi zbrušeni i uzet otisak, izliven je model koji je skeniran pomoću 3Shape D 800 laboratorijskog skenera. Zubna nadoknada je dizajnirana pomo ću 3Shape DentalSystem Premium softvera korišćenjem raspoloživih alata. Nakon završenog dizajna virtuelni podaci su poslati u program odgovoran za CAM Zenotec® mini CAD/CAM uređaja. Kao rezultat, dobijena je nadoknada pune morfologije bez potrebe za dorađivanjem.",
publisher = "Univerzitet u Novom Sadu - Fakultet tehničkih nauka - Departman za proizvodno mašinstvo, Novi Sad",
journal = "Journal of Production Engineering",
title = "Application of CAD/CAM technology in the design and creation of full anatomic bridge form zirconium dioxide, Primena CAD/CAM tehnologije u projektovanju i izradi mostova pune anatomske forme na bazi cirkonijum-dioksida",
volume = "18",
number = "1",
pages = "73-75",
url = "https://hdl.handle.net/21.15107/rcub_smile_2067"
}

Lapčević, A., Jevremović, D., Trifković, B., Santoši, Ž.,& Vukelić, Đ.. (2015). Application of CAD/CAM technology in the design and creation of full anatomic bridge form zirconium dioxide. in Journal of Production Engineering
Univerzitet u Novom Sadu - Fakultet tehničkih nauka - Departman za proizvodno mašinstvo, Novi Sad., 18(1), 73-75.
https://hdl.handle.net/21.15107/rcub_smile_2067

Lapčević A, Jevremović D, Trifković B, Santoši Ž, Vukelić Đ. Application of CAD/CAM technology in the design and creation of full anatomic bridge form zirconium dioxide. in Journal of Production Engineering. 2015;18(1):73-75.
https://hdl.handle.net/21.15107/rcub_smile_2067 .

Lapčević, Ana, Jevremović, Danimir, Trifković, Branka, Santoši, Željko, Vukelić, Đorđe, "Application of CAD/CAM technology in the design and creation of full anatomic bridge form zirconium dioxide" in Journal of Production Engineering, 18, no. 1 (2015):73-75,
https://hdl.handle.net/21.15107/rcub_smile_2067 .

TY  - JOUR
AU  - Puškar, Tatjana
AU  - Williams, Robert J.
AU  - Eggbeer, Dominic
AU  - Jevremović, Danimir
AU  - Lapčević, Ana
AU  - Trifković, Branka
AU  - Vukelić, Đorđe
PY  - 2013
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1791
AB  - Corrosion resistance is one of the characteristics that dental alloy should possess as it should be placed in the oral cavity. Adverse tissue reactions of the gingiva and the periodontium close to dental cast alloys may be caused by the effects of released metal elements. Corrosion effect of dental Co-Cr-Mo alloy was investigated by ICP MS according to the EN ISO 10271 and EN ISO 22674. Co- Cr dental alloy Remanium GM 800+ (Dentaurum Ispringen, Germany was tested in artificial saliva for 7 days at 37ºC. The released metals were detected by Nexion 300X ICP MS (Perkin Elmer, USA). The results showed that the metal release was very low for Co, Cr and Mo, far below the permitted levels. ICP-MS can be considered as very reliable method for such a research.
AB  - Otpornost na koroziju je jedna od karakteristika koju poseduju stomatološke legure koje trebaju biti postavljene u usnoj duplji. Neželjene reakcije tkiva gingive i parodoncijuma sa stomatološkim legurama može biti uzrokovano efektima oslobođenih metalnih elemenata. Efekat korozije stomatološke Co- Cr -Mo legure ispitana je ICP MS prema EN ISO 10271 i EN ISO 22674 . Co- Cr stomatološke legure Remanium GM 800 + ( Dentaurum Ispringen , testirano u Nemačkoj u veštačkoj pljuvački tokom 7 dana na 37º C. Otkriveni su oslobođeni metali Nekion 300Ks ICP MS ( Perkin Elmer , SAD ). Rezultati su pokazali veoma slabo oslobađanje metala, Cr i Mo , daleko ispod dozvoljenih nivoa. ICP -MS može smatrati veoma pouzdan metod za ovakvo istraživanje .
PB  - Univerzitet u Novom Sadu - Fakultet tehničkih nauka - Departman za proizvodno mašinstvo, Novi Sad
T2  - Journal of Production Engineering
T1  - Determination of corrosion characteristics of dental alloy by inductively coupled plasma mass spectrometry
T1  - Utvrđivanje korozionih karakteristika stomatološke legure sa induktivno spregnutim plazma masenim spektrometrom
VL  - 16
IS  - 1
SP  - 77
EP  - 80
UR  - https://hdl.handle.net/21.15107/rcub_smile_1791
ER  - 

@article{
author = "Puškar, Tatjana and Williams, Robert J. and Eggbeer, Dominic and Jevremović, Danimir and Lapčević, Ana and Trifković, Branka and Vukelić, Đorđe",
year = "2013",
abstract = "Corrosion resistance is one of the characteristics that dental alloy should possess as it should be placed in the oral cavity. Adverse tissue reactions of the gingiva and the periodontium close to dental cast alloys may be caused by the effects of released metal elements. Corrosion effect of dental Co-Cr-Mo alloy was investigated by ICP MS according to the EN ISO 10271 and EN ISO 22674. Co- Cr dental alloy Remanium GM 800+ (Dentaurum Ispringen, Germany was tested in artificial saliva for 7 days at 37ºC. The released metals were detected by Nexion 300X ICP MS (Perkin Elmer, USA). The results showed that the metal release was very low for Co, Cr and Mo, far below the permitted levels. ICP-MS can be considered as very reliable method for such a research., Otpornost na koroziju je jedna od karakteristika koju poseduju stomatološke legure koje trebaju biti postavljene u usnoj duplji. Neželjene reakcije tkiva gingive i parodoncijuma sa stomatološkim legurama može biti uzrokovano efektima oslobođenih metalnih elemenata. Efekat korozije stomatološke Co- Cr -Mo legure ispitana je ICP MS prema EN ISO 10271 i EN ISO 22674 . Co- Cr stomatološke legure Remanium GM 800 + ( Dentaurum Ispringen , testirano u Nemačkoj u veštačkoj pljuvački tokom 7 dana na 37º C. Otkriveni su oslobođeni metali Nekion 300Ks ICP MS ( Perkin Elmer , SAD ). Rezultati su pokazali veoma slabo oslobađanje metala, Cr i Mo , daleko ispod dozvoljenih nivoa. ICP -MS može smatrati veoma pouzdan metod za ovakvo istraživanje .",
publisher = "Univerzitet u Novom Sadu - Fakultet tehničkih nauka - Departman za proizvodno mašinstvo, Novi Sad",
journal = "Journal of Production Engineering",
title = "Determination of corrosion characteristics of dental alloy by inductively coupled plasma mass spectrometry, Utvrđivanje korozionih karakteristika stomatološke legure sa induktivno spregnutim plazma masenim spektrometrom",
volume = "16",
number = "1",
pages = "77-80",
url = "https://hdl.handle.net/21.15107/rcub_smile_1791"
}

Puškar, T., Williams, R. J., Eggbeer, D., Jevremović, D., Lapčević, A., Trifković, B.,& Vukelić, Đ.. (2013). Determination of corrosion characteristics of dental alloy by inductively coupled plasma mass spectrometry. in Journal of Production Engineering
Univerzitet u Novom Sadu - Fakultet tehničkih nauka - Departman za proizvodno mašinstvo, Novi Sad., 16(1), 77-80.
https://hdl.handle.net/21.15107/rcub_smile_1791

Puškar T, Williams RJ, Eggbeer D, Jevremović D, Lapčević A, Trifković B, Vukelić Đ. Determination of corrosion characteristics of dental alloy by inductively coupled plasma mass spectrometry. in Journal of Production Engineering. 2013;16(1):77-80.
https://hdl.handle.net/21.15107/rcub_smile_1791 .

Puškar, Tatjana, Williams, Robert J., Eggbeer, Dominic, Jevremović, Danimir, Lapčević, Ana, Trifković, Branka, Vukelić, Đorđe, "Determination of corrosion characteristics of dental alloy by inductively coupled plasma mass spectrometry" in Journal of Production Engineering, 16, no. 1 (2013):77-80,
https://hdl.handle.net/21.15107/rcub_smile_1791 .

TY  - JOUR
AU  - Stančić, Ivica
AU  - Popovac, Aleksandra
AU  - Okičić, Jelena B.
AU  - Lapčević, Ana
AU  - Živković, Rade
AU  - Elenčevski, Sašo
PY  - 2012
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1728
AB  - Introduction. Double telescopic crowns are connecting elements of partial dentures and are considered to be prosthetic devices of high aesthetic and biological value. Their basic drawback is the assessment of retention force value which has to be strong enough to balance the opposite forces but, nevertheless, must not result in harming the periodontal tissue of retention teeth while taking the denture off. The retention force is the highest immediately after the denture's construction and is progressively declining until the end of the 'settling in phase', i.e. until the retention force value becomes well-established. Aim of the study was the measurement of the overall retention force of completed telescopic dentures and a survey of 'settling in phase' duration. Methods. The measuring was conducted on 20 telescopic dentures consisting of 2, 3 or 4 telescopic crowns made of gold alloy type IV and executed by dynamometer. Results. An optimal retention force was detected in only 37% of telescopic dentures. An insufficient retention force was observed in 16%, while in the remaining 47% an excessive force was detected. In the largest number of dentures (35%) the settling in phase began after 33 cycles, which shows that this phase takes on average 10,6 days. Conclusion. The 'settling in phase', during which retention force becomes stabilized, is completed in the first ten days after the delivery of the completed telescopic denture.
AB  - Uvod. Dvostruke teleskop krune predstavljaju vezne elemente parcijalne proteze i smatraju se zubnim nadoknadama visokih estetskih i bioloških vrednosti. Njihov osnovni nedostatak predstavlja procena veličine retencione sile, koja mora biti dovoljno velika da uravnotežava suprotne sile a da sa druge strane, prilikom skidanja, ne dovodi do oštećenja parodontalnog tkiva zuba nosača. Retenciona sila je najveća odmah po izradi proteze i ona progresivno opada sve dok se ne završi tzv. 'faza uhodavanja', odnosno dok vrednost retencione sile ne postane ustaljena vrednost. Cilj istraživanja bio je merenje ukupne retencione sile gotovih teleskop proteza i ispitivanje vremenskog trajanja 'faze uhodavanja'. Materijal i metod. Merenja si vršena na 20 teleskop proteza, koje su u svom sastavu imale 2, 3 ili 4 teleskop krune izrađene od legure zlata tip IV. Merenja su vršena pomoću dinamometra. Rezultati. Kod samo 37% teleskop proteza registrovana je optimalna retenciona sila. Kod 16% registrovana je nedovoljna retenciona sila, dok je kod ostalih 47% registrovana prekomerna retenciona sila. Kod najvećeg broja proteza (35%), faza uhodavanja nastupila je nakon 33 ciklusa, što znači da je potrebno u proseku 10,6 dana za 'fazu uhodavanja'. Zaključak. 'Faza uhodavanja' tokom koje dolazi do ustaljenja retencione sile u proseku se završava u okviru prvih deset dana nakon predaje završene teleskop proteze.
PB  - Univerzitet u Nišu - Medicinski fakultet, Niš i Klinika za stomatologiju, Niš
T2  - Acta stomatologica Naissi
T1  - Assessment of telescopic denture's settling in phase duration
T1  - Procena trajanja faze uhodavanja teleskop proteza
VL  - 28
IS  - 65
SP  - 1119
EP  - 1127
DO  - 10.5937/asn1265119S
ER  - 

@article{
author = "Stančić, Ivica and Popovac, Aleksandra and Okičić, Jelena B. and Lapčević, Ana and Živković, Rade and Elenčevski, Sašo",
year = "2012",
abstract = "Introduction. Double telescopic crowns are connecting elements of partial dentures and are considered to be prosthetic devices of high aesthetic and biological value. Their basic drawback is the assessment of retention force value which has to be strong enough to balance the opposite forces but, nevertheless, must not result in harming the periodontal tissue of retention teeth while taking the denture off. The retention force is the highest immediately after the denture's construction and is progressively declining until the end of the 'settling in phase', i.e. until the retention force value becomes well-established. Aim of the study was the measurement of the overall retention force of completed telescopic dentures and a survey of 'settling in phase' duration. Methods. The measuring was conducted on 20 telescopic dentures consisting of 2, 3 or 4 telescopic crowns made of gold alloy type IV and executed by dynamometer. Results. An optimal retention force was detected in only 37% of telescopic dentures. An insufficient retention force was observed in 16%, while in the remaining 47% an excessive force was detected. In the largest number of dentures (35%) the settling in phase began after 33 cycles, which shows that this phase takes on average 10,6 days. Conclusion. The 'settling in phase', during which retention force becomes stabilized, is completed in the first ten days after the delivery of the completed telescopic denture., Uvod. Dvostruke teleskop krune predstavljaju vezne elemente parcijalne proteze i smatraju se zubnim nadoknadama visokih estetskih i bioloških vrednosti. Njihov osnovni nedostatak predstavlja procena veličine retencione sile, koja mora biti dovoljno velika da uravnotežava suprotne sile a da sa druge strane, prilikom skidanja, ne dovodi do oštećenja parodontalnog tkiva zuba nosača. Retenciona sila je najveća odmah po izradi proteze i ona progresivno opada sve dok se ne završi tzv. 'faza uhodavanja', odnosno dok vrednost retencione sile ne postane ustaljena vrednost. Cilj istraživanja bio je merenje ukupne retencione sile gotovih teleskop proteza i ispitivanje vremenskog trajanja 'faze uhodavanja'. Materijal i metod. Merenja si vršena na 20 teleskop proteza, koje su u svom sastavu imale 2, 3 ili 4 teleskop krune izrađene od legure zlata tip IV. Merenja su vršena pomoću dinamometra. Rezultati. Kod samo 37% teleskop proteza registrovana je optimalna retenciona sila. Kod 16% registrovana je nedovoljna retenciona sila, dok je kod ostalih 47% registrovana prekomerna retenciona sila. Kod najvećeg broja proteza (35%), faza uhodavanja nastupila je nakon 33 ciklusa, što znači da je potrebno u proseku 10,6 dana za 'fazu uhodavanja'. Zaključak. 'Faza uhodavanja' tokom koje dolazi do ustaljenja retencione sile u proseku se završava u okviru prvih deset dana nakon predaje završene teleskop proteze.",
publisher = "Univerzitet u Nišu - Medicinski fakultet, Niš i Klinika za stomatologiju, Niš",
journal = "Acta stomatologica Naissi",
title = "Assessment of telescopic denture's settling in phase duration, Procena trajanja faze uhodavanja teleskop proteza",
volume = "28",
number = "65",
pages = "1119-1127",
doi = "10.5937/asn1265119S"
}

Stančić, I., Popovac, A., Okičić, J. B., Lapčević, A., Živković, R.,& Elenčevski, S.. (2012). Assessment of telescopic denture's settling in phase duration. in Acta stomatologica Naissi
Univerzitet u Nišu - Medicinski fakultet, Niš i Klinika za stomatologiju, Niš., 28(65), 1119-1127.
https://doi.org/10.5937/asn1265119S

Stančić I, Popovac A, Okičić JB, Lapčević A, Živković R, Elenčevski S. Assessment of telescopic denture's settling in phase duration. in Acta stomatologica Naissi. 2012;28(65):1119-1127.
doi:10.5937/asn1265119S .

Stančić, Ivica, Popovac, Aleksandra, Okičić, Jelena B., Lapčević, Ana, Živković, Rade, Elenčevski, Sašo, "Assessment of telescopic denture's settling in phase duration" in Acta stomatologica Naissi, 28, no. 65 (2012):1119-1127,
https://doi.org/10.5937/asn1265119S . .

TY  - JOUR
AU  - Williams, Robert J.
AU  - Eggbeer, Dominic
AU  - Lapčević, Ana
AU  - Trifković, Branka
AU  - Puškar, Tatjana
AU  - Budak, Igor
AU  - Jevremović, Danimir
PY  - 2012
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1701
AB  - CAD/CAM technology in dentistry offers high-end ceramic restorations, known for its quality, preciseness, swiftness and repeatability. However, some features are still human-dependent. A young female patient required smile enhancement, since suffering from colour change on three devitalized frontal teeth. After fiber post placement, teeth were prepared for metal-free restoration. Consequently, abutments were scanned using extraoral scanner (Sirona, InEos Blue; Beinsheim, Germany). CAD software (version 3.8) has been used to create three crown copings, with cut-back in the incisal region. After finalization of the virtual modeling, data file has been transferred to a milling unit (Sirona, MCXL, Beinsheim, Germany) that produced crown copings out of a ceramic block (IPS e.max CAD, Ivoclar Vivadent, Schaan, Liechtestein). Crowns were tried for the fit and occlusion in the so-called blue stage, after which final strength and shape has been achieved by thermal treatment in the ceramic furnace. Individualization has been done manually, creating special effect in the cut-back region. Crowns were cemented adhesively. CAD/CAM offers modern and relevant way of producing ceramic restorations, however, special effects still require manual adjustments.
AB  - CAD/CAM tehnologije u stomatologiji nude visoko kvalitetne keramičke zamene, poznate po kvalitetu, preciznosti, brzini izrade i ponovljivosti. Međutim neke opcije još uvek zavise od ljudske intervencije. Mlada pacijentkinja je imala zahtev za poboljšanjem osmeha, pošto je patila od promene boje na tri prednja nezdrava zuba. Posle instalacije vlaknene podloge, zubi su bili spremni za bez-metalnu reparaciju. Otisci su bili skenirani ekstraoralnim skenerom (Sirona, InEos Blue, Beinsheim, Nemačka). CAD softver (verzija 3.8) je korišćen za generisanje tri navlake. Po završetku virtuelnog modeliranja podaci su prebačeni na glodalicu (Sirona, MCXL, Beinsheim, Nemačka) koja je izradila navlake od keramičkih blokova (IPS-a, max CAD, Ivoclar Vivadent, Schaan, Lihtenštajn). Navlake su posle isprobane zbog procene naleganja i začepljenja u tzv. plavoj etapi, posle čega je konačno očvršćavanje i oblikovanje postignuto termičkom obradom u peći za keramiku. Individualno prilagođavanje je izvršeno ručno, sa izradom posebnog efekta u zadnjem delu. Navlake su cementirane adhezijom. CAD/CAM nudi moderan i važan način u izradi keramičkih implanta ali posebni efekti još uvek zahtevaju intervenciju čoveka.
PB  - Univerzitet u Novom Sadu - Fakultet tehničkih nauka - Departman za proizvodno mašinstvo, Novi Sad
T2  - Journal of Production Engineering
T1  - Re-CAD/CAM approach in design and manufacturing of dental ceramic crowns in combination with manual individualization
T1  - Re-CAD/CAM pristup projektovanju i izradi zubnih keramičkih navlaka u kombinaciji sa ručnim individualnim prilagođavanjem
VL  - 15
IS  - 2
SP  - 91
EP  - 94
UR  - https://hdl.handle.net/21.15107/rcub_smile_1701
ER  - 

@article{
author = "Williams, Robert J. and Eggbeer, Dominic and Lapčević, Ana and Trifković, Branka and Puškar, Tatjana and Budak, Igor and Jevremović, Danimir",
year = "2012",
abstract = "CAD/CAM technology in dentistry offers high-end ceramic restorations, known for its quality, preciseness, swiftness and repeatability. However, some features are still human-dependent. A young female patient required smile enhancement, since suffering from colour change on three devitalized frontal teeth. After fiber post placement, teeth were prepared for metal-free restoration. Consequently, abutments were scanned using extraoral scanner (Sirona, InEos Blue; Beinsheim, Germany). CAD software (version 3.8) has been used to create three crown copings, with cut-back in the incisal region. After finalization of the virtual modeling, data file has been transferred to a milling unit (Sirona, MCXL, Beinsheim, Germany) that produced crown copings out of a ceramic block (IPS e.max CAD, Ivoclar Vivadent, Schaan, Liechtestein). Crowns were tried for the fit and occlusion in the so-called blue stage, after which final strength and shape has been achieved by thermal treatment in the ceramic furnace. Individualization has been done manually, creating special effect in the cut-back region. Crowns were cemented adhesively. CAD/CAM offers modern and relevant way of producing ceramic restorations, however, special effects still require manual adjustments., CAD/CAM tehnologije u stomatologiji nude visoko kvalitetne keramičke zamene, poznate po kvalitetu, preciznosti, brzini izrade i ponovljivosti. Međutim neke opcije još uvek zavise od ljudske intervencije. Mlada pacijentkinja je imala zahtev za poboljšanjem osmeha, pošto je patila od promene boje na tri prednja nezdrava zuba. Posle instalacije vlaknene podloge, zubi su bili spremni za bez-metalnu reparaciju. Otisci su bili skenirani ekstraoralnim skenerom (Sirona, InEos Blue, Beinsheim, Nemačka). CAD softver (verzija 3.8) je korišćen za generisanje tri navlake. Po završetku virtuelnog modeliranja podaci su prebačeni na glodalicu (Sirona, MCXL, Beinsheim, Nemačka) koja je izradila navlake od keramičkih blokova (IPS-a, max CAD, Ivoclar Vivadent, Schaan, Lihtenštajn). Navlake su posle isprobane zbog procene naleganja i začepljenja u tzv. plavoj etapi, posle čega je konačno očvršćavanje i oblikovanje postignuto termičkom obradom u peći za keramiku. Individualno prilagođavanje je izvršeno ručno, sa izradom posebnog efekta u zadnjem delu. Navlake su cementirane adhezijom. CAD/CAM nudi moderan i važan način u izradi keramičkih implanta ali posebni efekti još uvek zahtevaju intervenciju čoveka.",
publisher = "Univerzitet u Novom Sadu - Fakultet tehničkih nauka - Departman za proizvodno mašinstvo, Novi Sad",
journal = "Journal of Production Engineering",
title = "Re-CAD/CAM approach in design and manufacturing of dental ceramic crowns in combination with manual individualization, Re-CAD/CAM pristup projektovanju i izradi zubnih keramičkih navlaka u kombinaciji sa ručnim individualnim prilagođavanjem",
volume = "15",
number = "2",
pages = "91-94",
url = "https://hdl.handle.net/21.15107/rcub_smile_1701"
}

Williams, R. J., Eggbeer, D., Lapčević, A., Trifković, B., Puškar, T., Budak, I.,& Jevremović, D.. (2012). Re-CAD/CAM approach in design and manufacturing of dental ceramic crowns in combination with manual individualization. in Journal of Production Engineering
Univerzitet u Novom Sadu - Fakultet tehničkih nauka - Departman za proizvodno mašinstvo, Novi Sad., 15(2), 91-94.
https://hdl.handle.net/21.15107/rcub_smile_1701

Williams RJ, Eggbeer D, Lapčević A, Trifković B, Puškar T, Budak I, Jevremović D. Re-CAD/CAM approach in design and manufacturing of dental ceramic crowns in combination with manual individualization. in Journal of Production Engineering. 2012;15(2):91-94.
https://hdl.handle.net/21.15107/rcub_smile_1701 .

Williams, Robert J., Eggbeer, Dominic, Lapčević, Ana, Trifković, Branka, Puškar, Tatjana, Budak, Igor, Jevremović, Danimir, "Re-CAD/CAM approach in design and manufacturing of dental ceramic crowns in combination with manual individualization" in Journal of Production Engineering, 15, no. 2 (2012):91-94,
https://hdl.handle.net/21.15107/rcub_smile_1701 .