TY  - THES
AU  - Hatab, Nur
PY  - 2016
UR  - http://eteze.bg.ac.rs/application/showtheses?thesesId=3810
UR  - https://fedorabg.bg.ac.rs/fedora/get/o:12800/bdef:Content/download
UR  - http://vbs.rs/scripts/cobiss?command=DISPLAY&base=70036&RID=48109583
UR  - http://nardus.mpn.gov.rs/123456789/6741
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1014
AB  - Predmet istraživanja: Ortognatska hirurgija ima za cilj korekciju kraniofacijalnih deformiteta koji se ne mogu korigovati isključivo ortodontskom terapijom. Hirurška korekcija deformiteta III skeletne klase može se postići retroponiranjem donje vilice ili bimaksilarnom korekcijom koja podrazumeva retroponiranje donje uz anteriorno pomeranje gornje vilice. Pomeranje vilica dovodi do promene položaja okolnih mekih tkiva, što donosi značajne promene u izgledu lica, ali i do promene dimenzija gornjih disajnih puteva. Cilj: ove doktorske disertacije bio je da se procene promene dimenzija gornjih vazdušnih puteva i njihov uticaj na disanje i kvalitet života pacijenata operisanih od deformiteta III skeletne klase. Metodologija: Ovo je prospektivna studija, na uzorku koji su činili pacijenti koji su se javljali na Kliniku za maksilofacijalnu hirurgiju Stomatološkog fakulteta u Beogradu radi korekcije deformiteta III skeletne klase. Obuhvaćeni su pacijenti kod kojih je indikovano retroponiranje donje vilice ili bimaksilarna korekcija koja podrazumeva retroponiranje donje uz anteriorno pomeranje gornje vilice. Svi pacijenti su snimljeni Soredex Scanora 3Dx CBCT skenerom neposredno pre (T1) i najmanje 3 meseca posle hirurške korekcije (T2). Na pre i post operativnom snimku bili su izdvojeni faringealni vazdušni putevi i izmerena njihova zapremina. Potom je farinks bio podeljen na tri nivoa: 1) u nivou spine nasalis posterior, 2) u nivou najniže tačke mekog nepca i 3) u nivou vrha epiglotisa. Svakom od ovih preseka bila je izmerena površina kao i antero-posteriorna i lateralna širina. Takođe je bila izmerena zapremina sva tri dela farinksa. Na kraju je određena visina na kojoj se nalazi najveće suženje farinksa u odnosu na spinu nasalis posterior kao i njegova površina. Pre i posle operacije bili su određeni kefalometrijski parametri koji govore o promenama položaja i veličine gornje i donje vilice (uglovi SNA, SNB, ANB, GoGn-SN)...
PB  - Univerzitet u Beogradu, Stomatološki fakultet
T1  - Effect of upper airway changes on quality of life in patients underwent surgical correction of class III deformities
T1  - Uticaj promena gornjih vazdušnih puteva na kvalitet života pacijenata posle hirurške korekcije deformiteta III skeletne klase
UR  - https://hdl.handle.net/21.15107/rcub_nardus_6741
ER  - 

@phdthesis{
author = "Hatab, Nur",
year = "2016",
abstract = "Predmet istraživanja: Ortognatska hirurgija ima za cilj korekciju kraniofacijalnih deformiteta koji se ne mogu korigovati isključivo ortodontskom terapijom. Hirurška korekcija deformiteta III skeletne klase može se postići retroponiranjem donje vilice ili bimaksilarnom korekcijom koja podrazumeva retroponiranje donje uz anteriorno pomeranje gornje vilice. Pomeranje vilica dovodi do promene položaja okolnih mekih tkiva, što donosi značajne promene u izgledu lica, ali i do promene dimenzija gornjih disajnih puteva. Cilj: ove doktorske disertacije bio je da se procene promene dimenzija gornjih vazdušnih puteva i njihov uticaj na disanje i kvalitet života pacijenata operisanih od deformiteta III skeletne klase. Metodologija: Ovo je prospektivna studija, na uzorku koji su činili pacijenti koji su se javljali na Kliniku za maksilofacijalnu hirurgiju Stomatološkog fakulteta u Beogradu radi korekcije deformiteta III skeletne klase. Obuhvaćeni su pacijenti kod kojih je indikovano retroponiranje donje vilice ili bimaksilarna korekcija koja podrazumeva retroponiranje donje uz anteriorno pomeranje gornje vilice. Svi pacijenti su snimljeni Soredex Scanora 3Dx CBCT skenerom neposredno pre (T1) i najmanje 3 meseca posle hirurške korekcije (T2). Na pre i post operativnom snimku bili su izdvojeni faringealni vazdušni putevi i izmerena njihova zapremina. Potom je farinks bio podeljen na tri nivoa: 1) u nivou spine nasalis posterior, 2) u nivou najniže tačke mekog nepca i 3) u nivou vrha epiglotisa. Svakom od ovih preseka bila je izmerena površina kao i antero-posteriorna i lateralna širina. Takođe je bila izmerena zapremina sva tri dela farinksa. Na kraju je određena visina na kojoj se nalazi najveće suženje farinksa u odnosu na spinu nasalis posterior kao i njegova površina. Pre i posle operacije bili su određeni kefalometrijski parametri koji govore o promenama položaja i veličine gornje i donje vilice (uglovi SNA, SNB, ANB, GoGn-SN)...",
publisher = "Univerzitet u Beogradu, Stomatološki fakultet",
title = "Effect of upper airway changes on quality of life in patients underwent surgical correction of class III deformities, Uticaj promena gornjih vazdušnih puteva na kvalitet života pacijenata posle hirurške korekcije deformiteta III skeletne klase",
url = "https://hdl.handle.net/21.15107/rcub_nardus_6741"
}

Hatab, N.. (2016). Effect of upper airway changes on quality of life in patients underwent surgical correction of class III deformities. 
Univerzitet u Beogradu, Stomatološki fakultet..
https://hdl.handle.net/21.15107/rcub_nardus_6741

Hatab N. Effect of upper airway changes on quality of life in patients underwent surgical correction of class III deformities. 2016;.
https://hdl.handle.net/21.15107/rcub_nardus_6741 .

Hatab, Nur, "Effect of upper airway changes on quality of life in patients underwent surgical correction of class III deformities" (2016),
https://hdl.handle.net/21.15107/rcub_nardus_6741 .

TY  - JOUR
AU  - Tabaković, Saša Z.
AU  - Konstantinović, Vitomir
AU  - Radosavljević, Radivoje
AU  - Movrin, Dejan
AU  - Hadžistević, Miodrag
AU  - Hatab, Nur
PY  - 2015
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/2005
AB  - Introduction: Traumatology of the maxillofacial region represents a wide range of different types of facial skeletal injuries and encompasses numerous treatment methods. Application of computer-aided design (CAD) in combination with rapid prototyping (RP) technologies and three-dimensional computed tomography techniques facilitates surgical therapy planning for efficient treatment. Objective: The purpose of this study is to determine the efficiency of individually designed implants of poly-DL-lactide (PDLLA) in the reconstruction of blowout fractures of the orbital floor. Methods: In the course of a surgical treatment, individually designed implants manufactured by CAD/RP technologies were used. Preoperative analysis and postoperative monitoring were conducted to evaluate the successfulness of orbital floor reconstruction using customized PDLLA implants, based on: presence of diplopia, paresthesia of infraorbital nerve, and presence of enophthalmos. Results: In 6 of the 10 patients, diplopia completely disappeared immediately after surgical procedure. Diplopia gradually disappeared after 1 month in 3 patients, whereas in 1, it remained even after 6 months. In 7 patients, paresthesia disappeared within a month after surgery and in 3 patients within 2 months. Postoperative average Orbital volume (OV) of the injured side (13.333 +/- 3.177) was significantly reduced in comparison with preoperative OV (15.847 +/- 3.361) after reconstruction of the orbital floor with customized PDLLA implant (P  lt  0.001). Thus, average OV of corrected orbit was not different compared with the OV of the uninjured orbit (P = 0.981). Conclusions: Reconstruction of blowout fractures of the orbital floor by an individually designed PDLLA implant combined with virtual preoperative modeling allows easier preoperative preparation and yields satisfactory functional and esthetic outcomes.
PB  - Lippincott Williams & Wilkins, Philadelphia
T2  - Journal of Craniofacial Surgery
T1  - Application of Computer-Aided Designing and Rapid Prototyping Technologies in Reconstruction of Blowout Fractures of the Orbital Floor
VL  - 26
IS  - 5
SP  - 1558
EP  - 1563
DO  - 10.1097/SCS.0000000000001883
ER  - 

@article{
author = "Tabaković, Saša Z. and Konstantinović, Vitomir and Radosavljević, Radivoje and Movrin, Dejan and Hadžistević, Miodrag and Hatab, Nur",
year = "2015",
abstract = "Introduction: Traumatology of the maxillofacial region represents a wide range of different types of facial skeletal injuries and encompasses numerous treatment methods. Application of computer-aided design (CAD) in combination with rapid prototyping (RP) technologies and three-dimensional computed tomography techniques facilitates surgical therapy planning for efficient treatment. Objective: The purpose of this study is to determine the efficiency of individually designed implants of poly-DL-lactide (PDLLA) in the reconstruction of blowout fractures of the orbital floor. Methods: In the course of a surgical treatment, individually designed implants manufactured by CAD/RP technologies were used. Preoperative analysis and postoperative monitoring were conducted to evaluate the successfulness of orbital floor reconstruction using customized PDLLA implants, based on: presence of diplopia, paresthesia of infraorbital nerve, and presence of enophthalmos. Results: In 6 of the 10 patients, diplopia completely disappeared immediately after surgical procedure. Diplopia gradually disappeared after 1 month in 3 patients, whereas in 1, it remained even after 6 months. In 7 patients, paresthesia disappeared within a month after surgery and in 3 patients within 2 months. Postoperative average Orbital volume (OV) of the injured side (13.333 +/- 3.177) was significantly reduced in comparison with preoperative OV (15.847 +/- 3.361) after reconstruction of the orbital floor with customized PDLLA implant (P  lt  0.001). Thus, average OV of corrected orbit was not different compared with the OV of the uninjured orbit (P = 0.981). Conclusions: Reconstruction of blowout fractures of the orbital floor by an individually designed PDLLA implant combined with virtual preoperative modeling allows easier preoperative preparation and yields satisfactory functional and esthetic outcomes.",
publisher = "Lippincott Williams & Wilkins, Philadelphia",
journal = "Journal of Craniofacial Surgery",
title = "Application of Computer-Aided Designing and Rapid Prototyping Technologies in Reconstruction of Blowout Fractures of the Orbital Floor",
volume = "26",
number = "5",
pages = "1558-1563",
doi = "10.1097/SCS.0000000000001883"
}

Tabaković, S. Z., Konstantinović, V., Radosavljević, R., Movrin, D., Hadžistević, M.,& Hatab, N.. (2015). Application of Computer-Aided Designing and Rapid Prototyping Technologies in Reconstruction of Blowout Fractures of the Orbital Floor. in Journal of Craniofacial Surgery
Lippincott Williams & Wilkins, Philadelphia., 26(5), 1558-1563.
https://doi.org/10.1097/SCS.0000000000001883

Tabaković SZ, Konstantinović V, Radosavljević R, Movrin D, Hadžistević M, Hatab N. Application of Computer-Aided Designing and Rapid Prototyping Technologies in Reconstruction of Blowout Fractures of the Orbital Floor. in Journal of Craniofacial Surgery. 2015;26(5):1558-1563.
doi:10.1097/SCS.0000000000001883 .

Tabaković, Saša Z., Konstantinović, Vitomir, Radosavljević, Radivoje, Movrin, Dejan, Hadžistević, Miodrag, Hatab, Nur, "Application of Computer-Aided Designing and Rapid Prototyping Technologies in Reconstruction of Blowout Fractures of the Orbital Floor" in Journal of Craniofacial Surgery, 26, no. 5 (2015):1558-1563,
https://doi.org/10.1097/SCS.0000000000001883 . .