TY  - JOUR
AU  - Dačić, Stefan
AU  - Dačić-Simonović, Dragica
AU  - Živković, Slavoljub
AU  - Dačić, Miloš
AU  - Radičević, Goran
AU  - Mitić, Aleksandar
AU  - Tošić, Goran
AU  - Igić, Marko
PY  - 2014
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1914
AB  - Introduction Bonding between composite and hard dental tissue is most commonly assessed by measuring bonding strength or absence of marginal gap along the restoration interface. Marginal index (MI) is a significant indicator of the efficiency of the bond between material and dental tissue because it also shows the values of width and length of marginal gap. Objective The aim of this investigation was to estimate quantitative and qualitative features of the bond between composite resin and enamel and to determine the values of MI in enamel after application of two techniques of photopolymerization with two composite systems. Methods Forty Class V cavities on extracted teeth were prepared and restored for scanning electron microscope (SEM) analysis of composite bonding to enamel. Adhesion to enamel was achieved by Adper Single Bond 2 - ASB (3M ESPE), or by Adper Easy One - AEO (3M ESPE). Photopolymerization of Filtek Ultimate - FU (3M ESPE) was performed using constant halogen light (HIP) or soft start program (SOF). Results Quantitative and qualitative analysis, showed better mikromorphological bonding with SOF photopolymerization and ASB/FU composite system. Differences in MI between different photopolymerization techniques (HIP: 0.6707; SOF: 0.2395) were statistically significant (p lt 0.001), as well as differences between the composite systems (ASB/FU: 0.0470; AEO/ FU: 0.8651) (p lt 0.001) by two-way ANOVA test. Conclusion Better marginal adaptation of composite to enamel was obtained with SOF photopolymerization in both composite systems.
AB  - Uvod Kvalitet veze kompozita za tvrda zubna tkiva se najčešće procenjuje jačinom vezivanja ili izostankom marginalne pukotine po obodu restauracija. Marginalni indeks (MI) je važan pokazatelj efikasnosti pripoja materijala za zubna tkiva jer istovremeno pokazuje vrednosti i širine i dužine marginalne pukotine. Cilj rada Cilj rada je bio da se kvantitativno i kvalitativno proceni veza kompozitnih materijala za gleđ i utvrde vrednosti MI u gleđi nakon primene dve tehnike svetlosne polimerizacije i dva kompozitna sistema. Metode rada Na ekstrahovanim zubima je restaurisano 40 kaviteta pete klase za analizu pripoja kompozita za gleđ skening- elektronskom mikroskopijom (SEM). Adhezija za gleđ je obezbeđivana primenom Adper Single Bond 2 - ASB (3M ESPE), odnosno primenom Adper Easy One - AEO (3M ESPE). Svetlosna polimerizacija kompozitnog materijala (Filtek Ultimate - FU; 3M ESPE) vršena je standardnim halogenim svetlom (HIP) ili tzv. soft start programom (SOF). Rezultati Kvantitativna i kvalitativna analiza je pokazala bolje mikromorfološko vezivanje kompozita za gleđ kod SOF osvetljavanja i ASB/FU kompozitnog sistema. Na osnovu dvosmernog ANOVA testa, razlike u vrednosti MI između različitih svetlosnopolimerizujućih tehnika (HIP: 0,6707 i SOF: 0,2395) bile su statistički značajne (p lt 0,001), kao i razlike između kompozitnih sistema (ASB/FU: 0,0470 i AEO/FU: 0,8651; p lt 0,001). Zaključak Bolji marginalni pripoj kompozita za gleđ obezbeđen je primenom SOF osvetljavanja kod oba kompozitna sistema.
PB  - Srpsko lekarsko društvo, Beograd
T2  - Srpski arhiv za celokupno lekarstvo
T1  - Scanning electron microscopy analysis of marginal adaptation of composite resines to enamel after using of standard and gradual photopolimerization
T1  - Analiza ivičnog pripoja kompozitnih smola za gleđ skening-elektronskom mikroskopijom nakon primene standardne i postepene tehnike fotopolimerizacije
VL  - 142
IS  - 7-8
SP  - 404
EP  - 412
DO  - 10.2298/SARH1408404D
ER  - 

@article{
author = "Dačić, Stefan and Dačić-Simonović, Dragica and Živković, Slavoljub and Dačić, Miloš and Radičević, Goran and Mitić, Aleksandar and Tošić, Goran and Igić, Marko",
year = "2014",
abstract = "Introduction Bonding between composite and hard dental tissue is most commonly assessed by measuring bonding strength or absence of marginal gap along the restoration interface. Marginal index (MI) is a significant indicator of the efficiency of the bond between material and dental tissue because it also shows the values of width and length of marginal gap. Objective The aim of this investigation was to estimate quantitative and qualitative features of the bond between composite resin and enamel and to determine the values of MI in enamel after application of two techniques of photopolymerization with two composite systems. Methods Forty Class V cavities on extracted teeth were prepared and restored for scanning electron microscope (SEM) analysis of composite bonding to enamel. Adhesion to enamel was achieved by Adper Single Bond 2 - ASB (3M ESPE), or by Adper Easy One - AEO (3M ESPE). Photopolymerization of Filtek Ultimate - FU (3M ESPE) was performed using constant halogen light (HIP) or soft start program (SOF). Results Quantitative and qualitative analysis, showed better mikromorphological bonding with SOF photopolymerization and ASB/FU composite system. Differences in MI between different photopolymerization techniques (HIP: 0.6707; SOF: 0.2395) were statistically significant (p lt 0.001), as well as differences between the composite systems (ASB/FU: 0.0470; AEO/ FU: 0.8651) (p lt 0.001) by two-way ANOVA test. Conclusion Better marginal adaptation of composite to enamel was obtained with SOF photopolymerization in both composite systems., Uvod Kvalitet veze kompozita za tvrda zubna tkiva se najčešće procenjuje jačinom vezivanja ili izostankom marginalne pukotine po obodu restauracija. Marginalni indeks (MI) je važan pokazatelj efikasnosti pripoja materijala za zubna tkiva jer istovremeno pokazuje vrednosti i širine i dužine marginalne pukotine. Cilj rada Cilj rada je bio da se kvantitativno i kvalitativno proceni veza kompozitnih materijala za gleđ i utvrde vrednosti MI u gleđi nakon primene dve tehnike svetlosne polimerizacije i dva kompozitna sistema. Metode rada Na ekstrahovanim zubima je restaurisano 40 kaviteta pete klase za analizu pripoja kompozita za gleđ skening- elektronskom mikroskopijom (SEM). Adhezija za gleđ je obezbeđivana primenom Adper Single Bond 2 - ASB (3M ESPE), odnosno primenom Adper Easy One - AEO (3M ESPE). Svetlosna polimerizacija kompozitnog materijala (Filtek Ultimate - FU; 3M ESPE) vršena je standardnim halogenim svetlom (HIP) ili tzv. soft start programom (SOF). Rezultati Kvantitativna i kvalitativna analiza je pokazala bolje mikromorfološko vezivanje kompozita za gleđ kod SOF osvetljavanja i ASB/FU kompozitnog sistema. Na osnovu dvosmernog ANOVA testa, razlike u vrednosti MI između različitih svetlosnopolimerizujućih tehnika (HIP: 0,6707 i SOF: 0,2395) bile su statistički značajne (p lt 0,001), kao i razlike između kompozitnih sistema (ASB/FU: 0,0470 i AEO/FU: 0,8651; p lt 0,001). Zaključak Bolji marginalni pripoj kompozita za gleđ obezbeđen je primenom SOF osvetljavanja kod oba kompozitna sistema.",
publisher = "Srpsko lekarsko društvo, Beograd",
journal = "Srpski arhiv za celokupno lekarstvo",
title = "Scanning electron microscopy analysis of marginal adaptation of composite resines to enamel after using of standard and gradual photopolimerization, Analiza ivičnog pripoja kompozitnih smola za gleđ skening-elektronskom mikroskopijom nakon primene standardne i postepene tehnike fotopolimerizacije",
volume = "142",
number = "7-8",
pages = "404-412",
doi = "10.2298/SARH1408404D"
}

Dačić, S., Dačić-Simonović, D., Živković, S., Dačić, M., Radičević, G., Mitić, A., Tošić, G.,& Igić, M.. (2014). Scanning electron microscopy analysis of marginal adaptation of composite resines to enamel after using of standard and gradual photopolimerization. in Srpski arhiv za celokupno lekarstvo
Srpsko lekarsko društvo, Beograd., 142(7-8), 404-412.
https://doi.org/10.2298/SARH1408404D

Dačić S, Dačić-Simonović D, Živković S, Dačić M, Radičević G, Mitić A, Tošić G, Igić M. Scanning electron microscopy analysis of marginal adaptation of composite resines to enamel after using of standard and gradual photopolimerization. in Srpski arhiv za celokupno lekarstvo. 2014;142(7-8):404-412.
doi:10.2298/SARH1408404D .

Dačić, Stefan, Dačić-Simonović, Dragica, Živković, Slavoljub, Dačić, Miloš, Radičević, Goran, Mitić, Aleksandar, Tošić, Goran, Igić, Marko, "Scanning electron microscopy analysis of marginal adaptation of composite resines to enamel after using of standard and gradual photopolimerization" in Srpski arhiv za celokupno lekarstvo, 142, no. 7-8 (2014):404-412,
https://doi.org/10.2298/SARH1408404D . .

TY  - JOUR
AU  - Mitić, Aleksandar
AU  - Mitić, Nadica
AU  - Živković, Slavoljub
AU  - Tošić, Goran
AU  - Savić, Vojin
AU  - Dačić, Stefan
AU  - Stojanović, Miodrag
PY  - 2009
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1458
AB  - Introduction A smear layer forms on the root canal walls as the consequence of root instrumentation. The smear layer formed in such a way considerably influences the quality of root obturation and endodontic treatment outcome. Objective The aim of this study was to ultrastructurally analyze the surface of intracanal dentine after removal of the smear layer by the solution of doxycycline, citric acid and detergent Tween-80 (MTAD). Methods The study involved 60 single-rooted, extracted, human teeth divided into four groups. All samples were instrumented by a step-back technique and manual K-files, and rinsed during instrumentation by 2% CHX and H2O2. The first group of samples was exclusively rinsed by CHX and H2O2; in the second group, besides using CHX and H2O2, MTAD solution was used for the final irrigation. The samples which were rinsed by distilled water (+ control) and the samples rinsed by 5.25% NaOCl and 17% Na EDTA (-control) served as control groups. All samples were observed under the scanning electronic microscope JEOL-JSM-5300. The coronary, middle and apex thirds of the radix region were analyzed. Results The obtained results of the SEM analysis showed that the application of 2% chlorhexidine and hydrogen peroxide did not give clear dentine walls, and the smear layer could not be removed completely. The application of the same combination (CHX and H2O2), added by the final MTAD irrigation solution, led to the efficient removal of the smear layer, while the morphological structure of dentine surface remained unchanged. Statistical analysis showed that canal walls in the experimental group with MTAD as the final irrigation were significantly clearer compared to the control group (p lt 0.001). Conclusion Based on the obtained results, it can be concluded that MTAD is an efficient solution for the final irrigation of the canal system.
AB  - Uvod Razmazni sloj koji se stvara na zidovima kanala korena zuba posledica je instrumentacije kanala. On značajno utiče na kvalitet opturacije kanala i krajnji ishod endodontskog lečenja. Cilj rada Cilj istraživanja je bio da se ustanovi stepen efikasnosti rastvora doksiciklina, limunske kiseline i deterxenta Tween-80 (poznate pod nazivom MTAD) kao završnog irigansa u uklanjanju razmaznog sloja s površina intrakanalnog dentina. Metode rada Ispitano je 60 jednokorenih ekstrahovanih humanih zuba, podeljenih u četiri grupe. Svi uzorci su instrumentirani tehnikom step-back i ručnim K-turpijama, a tokom instrumentacije ispirani dvoprocentnim hlorheksidinom (CHX) i tropostotnim vodonik-peroksidom (H2O2). Prva grupa uzoraka je ispirana isključivo sa CHX i H2O2, dok je za završnu irigaciju uzoraka druge grupe korišćen i rastvor MTAD. Svi uzorci su posmatrani na skening elektronskom mikroskopu JEOL-JSM-5300. Ultrastrukturno su analizirane koronarna, srednja i apikalna trećina korenske regije. Rezultati Primenom samo CHX i H2O2 kao irigansa ne dobijaju se čisti dentinski zidovi, a razmazni sloj sa zidova nije potpuno uklonjen. Istom kombinacijom irigansa koja je dopunjena rastvorom MTAD za završno ispiranje razmazni sloj se efikasno uklanja, a morfološka struktura dentinske površine se ne menja. Statistička analiza je pokazala da su zidovi kanala uzoraka ispiranih i sa MTAD značajno čistiji nego kod uzoraka kontrolne grupe (p lt 0,001). Zaključak Na osnovu rezultata istraživanja može se zaključiti da je MTAD bio najefikasniji rastvor za završnu irigaciju kanalnog sistema korena zuba.
PB  - Srpsko lekarsko društvo, Beograd
T2  - Srpski arhiv za celokupno lekarstvo
T1  - Efficiency of final irrigation of root canal in removal of smear layer
T1  - Efikasnost sredstava za završnu irigaciju kanala korena zuba u uklanjanju razmaznog sloja
VL  - 137
IS  - 9-10
SP  - 482
EP  - 489
DO  - 10.2298/SARH0910482M
ER  - 

@article{
author = "Mitić, Aleksandar and Mitić, Nadica and Živković, Slavoljub and Tošić, Goran and Savić, Vojin and Dačić, Stefan and Stojanović, Miodrag",
year = "2009",
abstract = "Introduction A smear layer forms on the root canal walls as the consequence of root instrumentation. The smear layer formed in such a way considerably influences the quality of root obturation and endodontic treatment outcome. Objective The aim of this study was to ultrastructurally analyze the surface of intracanal dentine after removal of the smear layer by the solution of doxycycline, citric acid and detergent Tween-80 (MTAD). Methods The study involved 60 single-rooted, extracted, human teeth divided into four groups. All samples were instrumented by a step-back technique and manual K-files, and rinsed during instrumentation by 2% CHX and H2O2. The first group of samples was exclusively rinsed by CHX and H2O2; in the second group, besides using CHX and H2O2, MTAD solution was used for the final irrigation. The samples which were rinsed by distilled water (+ control) and the samples rinsed by 5.25% NaOCl and 17% Na EDTA (-control) served as control groups. All samples were observed under the scanning electronic microscope JEOL-JSM-5300. The coronary, middle and apex thirds of the radix region were analyzed. Results The obtained results of the SEM analysis showed that the application of 2% chlorhexidine and hydrogen peroxide did not give clear dentine walls, and the smear layer could not be removed completely. The application of the same combination (CHX and H2O2), added by the final MTAD irrigation solution, led to the efficient removal of the smear layer, while the morphological structure of dentine surface remained unchanged. Statistical analysis showed that canal walls in the experimental group with MTAD as the final irrigation were significantly clearer compared to the control group (p lt 0.001). Conclusion Based on the obtained results, it can be concluded that MTAD is an efficient solution for the final irrigation of the canal system., Uvod Razmazni sloj koji se stvara na zidovima kanala korena zuba posledica je instrumentacije kanala. On značajno utiče na kvalitet opturacije kanala i krajnji ishod endodontskog lečenja. Cilj rada Cilj istraživanja je bio da se ustanovi stepen efikasnosti rastvora doksiciklina, limunske kiseline i deterxenta Tween-80 (poznate pod nazivom MTAD) kao završnog irigansa u uklanjanju razmaznog sloja s površina intrakanalnog dentina. Metode rada Ispitano je 60 jednokorenih ekstrahovanih humanih zuba, podeljenih u četiri grupe. Svi uzorci su instrumentirani tehnikom step-back i ručnim K-turpijama, a tokom instrumentacije ispirani dvoprocentnim hlorheksidinom (CHX) i tropostotnim vodonik-peroksidom (H2O2). Prva grupa uzoraka je ispirana isključivo sa CHX i H2O2, dok je za završnu irigaciju uzoraka druge grupe korišćen i rastvor MTAD. Svi uzorci su posmatrani na skening elektronskom mikroskopu JEOL-JSM-5300. Ultrastrukturno su analizirane koronarna, srednja i apikalna trećina korenske regije. Rezultati Primenom samo CHX i H2O2 kao irigansa ne dobijaju se čisti dentinski zidovi, a razmazni sloj sa zidova nije potpuno uklonjen. Istom kombinacijom irigansa koja je dopunjena rastvorom MTAD za završno ispiranje razmazni sloj se efikasno uklanja, a morfološka struktura dentinske površine se ne menja. Statistička analiza je pokazala da su zidovi kanala uzoraka ispiranih i sa MTAD značajno čistiji nego kod uzoraka kontrolne grupe (p lt 0,001). Zaključak Na osnovu rezultata istraživanja može se zaključiti da je MTAD bio najefikasniji rastvor za završnu irigaciju kanalnog sistema korena zuba.",
publisher = "Srpsko lekarsko društvo, Beograd",
journal = "Srpski arhiv za celokupno lekarstvo",
title = "Efficiency of final irrigation of root canal in removal of smear layer, Efikasnost sredstava za završnu irigaciju kanala korena zuba u uklanjanju razmaznog sloja",
volume = "137",
number = "9-10",
pages = "482-489",
doi = "10.2298/SARH0910482M"
}

Mitić, A., Mitić, N., Živković, S., Tošić, G., Savić, V., Dačić, S.,& Stojanović, M.. (2009). Efficiency of final irrigation of root canal in removal of smear layer. in Srpski arhiv za celokupno lekarstvo
Srpsko lekarsko društvo, Beograd., 137(9-10), 482-489.
https://doi.org/10.2298/SARH0910482M

Mitić A, Mitić N, Živković S, Tošić G, Savić V, Dačić S, Stojanović M. Efficiency of final irrigation of root canal in removal of smear layer. in Srpski arhiv za celokupno lekarstvo. 2009;137(9-10):482-489.
doi:10.2298/SARH0910482M .

Mitić, Aleksandar, Mitić, Nadica, Živković, Slavoljub, Tošić, Goran, Savić, Vojin, Dačić, Stefan, Stojanović, Miodrag, "Efficiency of final irrigation of root canal in removal of smear layer" in Srpski arhiv za celokupno lekarstvo, 137, no. 9-10 (2009):482-489,
https://doi.org/10.2298/SARH0910482M . .

TY  - JOUR
AU  - Živković, Slavoljub
AU  - Kolar, Mila
AU  - Blažić, Larisa
AU  - Vučetić, Mirjana
AU  - Tošić, Goran
PY  - 2004
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1199
AB  - Adhesion to enamel has become a routine technique in restorative dentistry. Adhesion to dentin, however, is still under investigation. Except structural elements of the dentin, smear layer has been one of the reasons that the interaction between the adhesive system and this tissue is difficult. The smear layer tissue created by cutting a tooth. It varies in thickness, roughness, density and degree of attachment andoccludes tubules and reduces the dental permeabilita. Dentin adhesivesystems can react with intertubular and peritubular dentin only when this smear layer is removed or when the adhesive system is capable of diffusion through layer of debris. As part of restorative procedures required by adhesive dentistry, the smear layer must be removed, modified or impregnated by the resin to allow for bonding between the tooth and the restorative material. For remove and dissolve of smear layer acid conditioners on total etch and self-etching primers were used. Self-etching primer systems are undergoing rapid evolution; their results are not yet sufficiently predictable overall, but some systems have achieved positive results in both enamel and dentin bonding. Further studies are necessary to confirm the long-term efficiency of these self-etching primers.
AB  - Adhezija za gleđ predstavlja rutinsku tehniku u restaurativnoj proceduri, dok je adhezija za dentin još uvek problem brojnih istraživanja. Osim strukturalnih karakteristika dentina i prisustvo razmaznog sloja je jedan od osnovnih razloga otežane interakcije između adhezivnih materijala i ovog tkiva. Razmazni sloj je u stvari površinski sloj na dentinu koji nastaje sečenjem dentina rotirajućim intstrumentima. Ovaj sloj ima različitu debljinu, hrapavost i gustinu, zatvara dentinske kanaliće i smanjuje propustljivost dentina. Dentin adhezivna sredstava mogu reagovati sa intertubularnim i peritubularnim dentinom, jedino ako je razmazni sloj uklonjen ili ako adhezivni sistem može da difunduje kroz ovaj sloj. Kao deo restaurativne procedure koju zahteva adhezivna stomatologija razmazni sloj mora biti uklonjen, modifikovan ili impregniran vezivnom smolom kako bi se ostvarila kvalitetna adhezivna veza između zubnih struktura i restaurativnih materijala. Za uklanjanje ili modifikovanje razmaznog sloja na dentinu koriste se kiselinski kondicioneri u tehnici totalnog nagrizanja gleđi i dentina odnosno u tehnici sa samonagrizajućim prajmerima. Samonagrizajući prajmeri se brzo razvijaju, njihovi rezultati nisu predvidljivi u potpunosti, ali ovi adhezivni sistemi ostvaruju kvalitetnu vezu i sa gleđi i sa dentinom. Da bi se potvrdila njihova dugoročna efikasnost neophodna su dalja klinička ispitivanja.
PB  - Srpsko lekarsko društvo - Stomatološka sekcija, Beograd
T2  - Stomatološki glasnik Srbije
T1  - Smear layer on dentin in restorative dentistry
T1  - Razmazni sloj na dentinu u restaurativnoj stomatologiji
VL  - 51
IS  - 4
SP  - 169
EP  - 176
DO  - 10.2298/SGS0404169Z
ER  - 

@article{
author = "Živković, Slavoljub and Kolar, Mila and Blažić, Larisa and Vučetić, Mirjana and Tošić, Goran",
year = "2004",
abstract = "Adhesion to enamel has become a routine technique in restorative dentistry. Adhesion to dentin, however, is still under investigation. Except structural elements of the dentin, smear layer has been one of the reasons that the interaction between the adhesive system and this tissue is difficult. The smear layer tissue created by cutting a tooth. It varies in thickness, roughness, density and degree of attachment andoccludes tubules and reduces the dental permeabilita. Dentin adhesivesystems can react with intertubular and peritubular dentin only when this smear layer is removed or when the adhesive system is capable of diffusion through layer of debris. As part of restorative procedures required by adhesive dentistry, the smear layer must be removed, modified or impregnated by the resin to allow for bonding between the tooth and the restorative material. For remove and dissolve of smear layer acid conditioners on total etch and self-etching primers were used. Self-etching primer systems are undergoing rapid evolution; their results are not yet sufficiently predictable overall, but some systems have achieved positive results in both enamel and dentin bonding. Further studies are necessary to confirm the long-term efficiency of these self-etching primers., Adhezija za gleđ predstavlja rutinsku tehniku u restaurativnoj proceduri, dok je adhezija za dentin još uvek problem brojnih istraživanja. Osim strukturalnih karakteristika dentina i prisustvo razmaznog sloja je jedan od osnovnih razloga otežane interakcije između adhezivnih materijala i ovog tkiva. Razmazni sloj je u stvari površinski sloj na dentinu koji nastaje sečenjem dentina rotirajućim intstrumentima. Ovaj sloj ima različitu debljinu, hrapavost i gustinu, zatvara dentinske kanaliće i smanjuje propustljivost dentina. Dentin adhezivna sredstava mogu reagovati sa intertubularnim i peritubularnim dentinom, jedino ako je razmazni sloj uklonjen ili ako adhezivni sistem može da difunduje kroz ovaj sloj. Kao deo restaurativne procedure koju zahteva adhezivna stomatologija razmazni sloj mora biti uklonjen, modifikovan ili impregniran vezivnom smolom kako bi se ostvarila kvalitetna adhezivna veza između zubnih struktura i restaurativnih materijala. Za uklanjanje ili modifikovanje razmaznog sloja na dentinu koriste se kiselinski kondicioneri u tehnici totalnog nagrizanja gleđi i dentina odnosno u tehnici sa samonagrizajućim prajmerima. Samonagrizajući prajmeri se brzo razvijaju, njihovi rezultati nisu predvidljivi u potpunosti, ali ovi adhezivni sistemi ostvaruju kvalitetnu vezu i sa gleđi i sa dentinom. Da bi se potvrdila njihova dugoročna efikasnost neophodna su dalja klinička ispitivanja.",
publisher = "Srpsko lekarsko društvo - Stomatološka sekcija, Beograd",
journal = "Stomatološki glasnik Srbije",
title = "Smear layer on dentin in restorative dentistry, Razmazni sloj na dentinu u restaurativnoj stomatologiji",
volume = "51",
number = "4",
pages = "169-176",
doi = "10.2298/SGS0404169Z"
}

Živković, S., Kolar, M., Blažić, L., Vučetić, M.,& Tošić, G.. (2004). Smear layer on dentin in restorative dentistry. in Stomatološki glasnik Srbije
Srpsko lekarsko društvo - Stomatološka sekcija, Beograd., 51(4), 169-176.
https://doi.org/10.2298/SGS0404169Z

Živković S, Kolar M, Blažić L, Vučetić M, Tošić G. Smear layer on dentin in restorative dentistry. in Stomatološki glasnik Srbije. 2004;51(4):169-176.
doi:10.2298/SGS0404169Z .

Živković, Slavoljub, Kolar, Mila, Blažić, Larisa, Vučetić, Mirjana, Tošić, Goran, "Smear layer on dentin in restorative dentistry" in Stomatološki glasnik Srbije, 51, no. 4 (2004):169-176,
https://doi.org/10.2298/SGS0404169Z . .