TY  - JOUR
AU  - Pajić, Srbislav
AU  - Antić, Svetlana
AU  - Vukicević, Arso M.
AU  - Đorđević, Nenad
AU  - Jovicić, Gordana
AU  - Savić, Živorad
AU  - Saveljić, Igor
AU  - Janović, Aleksa
AU  - Pešić, Zoran
AU  - Đurić, Marija
AU  - Filipović, Nenad
PY  - 2017
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/2215
AB  - Anatomy of frontal sinuses varies individually, from differences in volume and shape to a rare case when the sinuses are absent. However, there are scarce data related to influence of these variations on impact generated fracture pattern. Therefore, the aim of this study was to analyse the influence of frontal sinus volume on the stress distribution and fracture pattern in the frontal region. The study included four representative Finite Element models of the skull. Reference model was built on the basis of computed tomography scans of a human head with normally developed frontal sinuses. By modifying the reference model, three additional models were generated: a model without sinuses, with hypoplasic, and with hyperplasic sinuses. A 7.7 kN force was applied perpendicularly to the forehead of each model, in order to simulate a frontal impact. The results demonstrated that the distribution of impact stress in frontal region depends on the frontal sinus volume. The anterior sinus wall showed the highest fragility in case with hyperplasic sinuses, whereas posterior wall/inner plate showed more fragility in cases with hypoplasic and undeveloped sinuses. Well-developed frontal sinusesmight, through absorption of the impact energy by anterior wall, protect the posterior wall and intracranial contents.
PB  - Frontiers Media Sa, Lausanne
T2  - Frontiers in Physiology
T1  - Trauma of the Frontal Region Is Influenced by the Volume of Frontal Sinuses. A Finite Element Study
VL  - 8
DO  - 10.3389/fphys.2017.00493
ER  - 

@article{
author = "Pajić, Srbislav and Antić, Svetlana and Vukicević, Arso M. and Đorđević, Nenad and Jovicić, Gordana and Savić, Živorad and Saveljić, Igor and Janović, Aleksa and Pešić, Zoran and Đurić, Marija and Filipović, Nenad",
year = "2017",
abstract = "Anatomy of frontal sinuses varies individually, from differences in volume and shape to a rare case when the sinuses are absent. However, there are scarce data related to influence of these variations on impact generated fracture pattern. Therefore, the aim of this study was to analyse the influence of frontal sinus volume on the stress distribution and fracture pattern in the frontal region. The study included four representative Finite Element models of the skull. Reference model was built on the basis of computed tomography scans of a human head with normally developed frontal sinuses. By modifying the reference model, three additional models were generated: a model without sinuses, with hypoplasic, and with hyperplasic sinuses. A 7.7 kN force was applied perpendicularly to the forehead of each model, in order to simulate a frontal impact. The results demonstrated that the distribution of impact stress in frontal region depends on the frontal sinus volume. The anterior sinus wall showed the highest fragility in case with hyperplasic sinuses, whereas posterior wall/inner plate showed more fragility in cases with hypoplasic and undeveloped sinuses. Well-developed frontal sinusesmight, through absorption of the impact energy by anterior wall, protect the posterior wall and intracranial contents.",
publisher = "Frontiers Media Sa, Lausanne",
journal = "Frontiers in Physiology",
title = "Trauma of the Frontal Region Is Influenced by the Volume of Frontal Sinuses. A Finite Element Study",
volume = "8",
doi = "10.3389/fphys.2017.00493"
}

Pajić, S., Antić, S., Vukicević, A. M., Đorđević, N., Jovicić, G., Savić, Ž., Saveljić, I., Janović, A., Pešić, Z., Đurić, M.,& Filipović, N.. (2017). Trauma of the Frontal Region Is Influenced by the Volume of Frontal Sinuses. A Finite Element Study. in Frontiers in Physiology
Frontiers Media Sa, Lausanne., 8.
https://doi.org/10.3389/fphys.2017.00493

Pajić S, Antić S, Vukicević AM, Đorđević N, Jovicić G, Savić Ž, Saveljić I, Janović A, Pešić Z, Đurić M, Filipović N. Trauma of the Frontal Region Is Influenced by the Volume of Frontal Sinuses. A Finite Element Study. in Frontiers in Physiology. 2017;8.
doi:10.3389/fphys.2017.00493 .

Pajić, Srbislav, Antić, Svetlana, Vukicević, Arso M., Đorđević, Nenad, Jovicić, Gordana, Savić, Živorad, Saveljić, Igor, Janović, Aleksa, Pešić, Zoran, Đurić, Marija, Filipović, Nenad, "Trauma of the Frontal Region Is Influenced by the Volume of Frontal Sinuses. A Finite Element Study" in Frontiers in Physiology, 8 (2017),
https://doi.org/10.3389/fphys.2017.00493 . .

TY  - JOUR
AU  - Milutinović, Jovana
AU  - Nedeljković, Nenad
AU  - Korolija, Nenad
AU  - Miličić, Biljana
PY  - 2017
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/2268
AB  - Introduction/objective: The recognition of differences in individual assessment of facial attractiveness could be valuable assistance in planning the orthodontic treatment. The aim of this study was to compare facial profile attractiveness changes of patients treated with the Herbst appliance perceived by orthodontists and laypersons. Methods: The patient sample comprised 33 young Caucasian still-growing patients, aged 14–18 years, with skeletal class II malocclusion treated with the Herbst and multibracket appliances. Facial profile photographs before and after the treatment were shown to 54 orthodontists and 50 laypersons. In the esthetics oriented poll, the evaluators rated the change in facial appearance. Results: The attractiveness scores differed between the two rater groups (p  lt  0.001), with orthodontists being more generous, whereas there was no significant difference between female and male evaluators in both groups (p > 0.05). However, scores differed significantly in grading female and male patients (p  lt  0.001), so that female patients got higher scores; younger evaluators graded more critically between different age groups of the evaluators (p  lt  0.001), as well as between the patients with different initial severity of malocclusion (p  lt  0.001). Conclusion: The difference in attractiveness scores differed between two groups, with laypersons being more critical than orthodontists. Higher scores were given to female patients by both groups, as well as by the evaluators in the older age group.
AB  - Uvod/Cilj: Prepoznavanje razlika u individualnoj proce- ni facijalne atraktivnosti može biti od velike pomoći u planiranju ortodontske terapije. Cilj rada je bio da se uporedi promena atraktivnosti profila lica bolesnika tretiranih Herbstovim aparatom od strane ortodonata i laika. Metode: Uzorak se sastojao se od 33 ispitanika uzrasta 14–18 godina, koji su imali malokluziju II klase i lečeni Herbstovim aparatom u kombinaciji sa gornjim i donjim fiksnim aparatom. Njihove profilne fotografije pre i posle terapije pregledali su 54 ortodonta i 50 laika. Oni su ocenjivali, u vidu ankete, promenu facijalne atraktivnosti. Rezultati: Ocene facijalne privlačnosti razlikovale su se između dve grupe (p  lt  0,001), tako što su ortodonti dava- li veće ocene, dok nije bilo statistički značajne razlike između polova u obe grupe (p > 0,05). Međutim, rezultati su se značajno razlikovali pri ocenjivanju muških i ženskih bolesnika (p  lt  0,001), te su bolesnice dobile veće ocene. Takođe, rezultati su se značajno razlikovali između različitih starosnih grupa ocenjivača (p  lt  0,001), tako da je mlađa grupa davala niže ocene, te bila kritičnija u pro- ceni. Razlika je bila značajna i kod ocenjivanja bolesnika sa različitim stepenom izraženosti anomalije (p  lt  0,001). Zaključak: Razlika u ocenama facijalne privlačnosti postojala je između dve grupe, te su laici bili kritičniji u ocenjivanju u odnosu na ortodonte. Veće ocene dobile su bolesnice od strane obe grupe, a starija uzrasna grupa ocenjivala je većim ocenama sve bolesnike.
PB  - Srpsko lekarsko društvo, Beograd
T2  - Srpski arhiv za celokupno lekarstvo
T1  - Facial profile esthetics change of class II malocclusion patients treated with the Herbst appliance as perceived by orthodontists and laypersons
T1  - Procena promene facijalne estetike kod bolesnika sa II klasom malokluzije lečenih herbstovim aparatom
VL  - 145
IS  - 9-10
SP  - 446
EP  - 451
DO  - 10.2298/SARH160926081M
ER  - 

@article{
author = "Milutinović, Jovana and Nedeljković, Nenad and Korolija, Nenad and Miličić, Biljana",
year = "2017",
abstract = "Introduction/objective: The recognition of differences in individual assessment of facial attractiveness could be valuable assistance in planning the orthodontic treatment. The aim of this study was to compare facial profile attractiveness changes of patients treated with the Herbst appliance perceived by orthodontists and laypersons. Methods: The patient sample comprised 33 young Caucasian still-growing patients, aged 14–18 years, with skeletal class II malocclusion treated with the Herbst and multibracket appliances. Facial profile photographs before and after the treatment were shown to 54 orthodontists and 50 laypersons. In the esthetics oriented poll, the evaluators rated the change in facial appearance. Results: The attractiveness scores differed between the two rater groups (p  lt  0.001), with orthodontists being more generous, whereas there was no significant difference between female and male evaluators in both groups (p > 0.05). However, scores differed significantly in grading female and male patients (p  lt  0.001), so that female patients got higher scores; younger evaluators graded more critically between different age groups of the evaluators (p  lt  0.001), as well as between the patients with different initial severity of malocclusion (p  lt  0.001). Conclusion: The difference in attractiveness scores differed between two groups, with laypersons being more critical than orthodontists. Higher scores were given to female patients by both groups, as well as by the evaluators in the older age group., Uvod/Cilj: Prepoznavanje razlika u individualnoj proce- ni facijalne atraktivnosti može biti od velike pomoći u planiranju ortodontske terapije. Cilj rada je bio da se uporedi promena atraktivnosti profila lica bolesnika tretiranih Herbstovim aparatom od strane ortodonata i laika. Metode: Uzorak se sastojao se od 33 ispitanika uzrasta 14–18 godina, koji su imali malokluziju II klase i lečeni Herbstovim aparatom u kombinaciji sa gornjim i donjim fiksnim aparatom. Njihove profilne fotografije pre i posle terapije pregledali su 54 ortodonta i 50 laika. Oni su ocenjivali, u vidu ankete, promenu facijalne atraktivnosti. Rezultati: Ocene facijalne privlačnosti razlikovale su se između dve grupe (p  lt  0,001), tako što su ortodonti dava- li veće ocene, dok nije bilo statistički značajne razlike između polova u obe grupe (p > 0,05). Međutim, rezultati su se značajno razlikovali pri ocenjivanju muških i ženskih bolesnika (p  lt  0,001), te su bolesnice dobile veće ocene. Takođe, rezultati su se značajno razlikovali između različitih starosnih grupa ocenjivača (p  lt  0,001), tako da je mlađa grupa davala niže ocene, te bila kritičnija u pro- ceni. Razlika je bila značajna i kod ocenjivanja bolesnika sa različitim stepenom izraženosti anomalije (p  lt  0,001). Zaključak: Razlika u ocenama facijalne privlačnosti postojala je između dve grupe, te su laici bili kritičniji u ocenjivanju u odnosu na ortodonte. Veće ocene dobile su bolesnice od strane obe grupe, a starija uzrasna grupa ocenjivala je većim ocenama sve bolesnike.",
publisher = "Srpsko lekarsko društvo, Beograd",
journal = "Srpski arhiv za celokupno lekarstvo",
title = "Facial profile esthetics change of class II malocclusion patients treated with the Herbst appliance as perceived by orthodontists and laypersons, Procena promene facijalne estetike kod bolesnika sa II klasom malokluzije lečenih herbstovim aparatom",
volume = "145",
number = "9-10",
pages = "446-451",
doi = "10.2298/SARH160926081M"
}

Milutinović, J., Nedeljković, N., Korolija, N.,& Miličić, B.. (2017). Facial profile esthetics change of class II malocclusion patients treated with the Herbst appliance as perceived by orthodontists and laypersons. in Srpski arhiv za celokupno lekarstvo
Srpsko lekarsko društvo, Beograd., 145(9-10), 446-451.
https://doi.org/10.2298/SARH160926081M

Milutinović J, Nedeljković N, Korolija N, Miličić B. Facial profile esthetics change of class II malocclusion patients treated with the Herbst appliance as perceived by orthodontists and laypersons. in Srpski arhiv za celokupno lekarstvo. 2017;145(9-10):446-451.
doi:10.2298/SARH160926081M .

Milutinović, Jovana, Nedeljković, Nenad, Korolija, Nenad, Miličić, Biljana, "Facial profile esthetics change of class II malocclusion patients treated with the Herbst appliance as perceived by orthodontists and laypersons" in Srpski arhiv za celokupno lekarstvo, 145, no. 9-10 (2017):446-451,
https://doi.org/10.2298/SARH160926081M . .

TY  - JOUR
AU  - Janović, Aleksa
AU  - Saveljić, Igor
AU  - Vukicević, Arso M.
AU  - Nikolić, Dalibor
AU  - Rakočević, Zoran
AU  - Jovicić, Gordana
AU  - Filipović, Nenad
AU  - Đurić, Marija
PY  - 2015
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/2050
AB  - Understanding of the occlusal load distribution through the mid-facial skeleton in natural dentition is essential because alterations in magnitude and/or direction of occlusal forces may cause remarkable changes in cortical and trabecular bone structure. Previous analyses by strain gauge technique, photoelastic and, more recently, finite element (FE) methods provided no direct evidence for occlusal load distribution through the cortical and trabecular bone compartments individually. Therefore, we developed an improved three-dimensional FE model of the human skull in order to clarify the distribution of occlusal forces through the cortical and trabecular bone during habitual masticatory activities. Particular focus was placed on the load transfer through the anterior and posterior maxilla. The results were presented in von Mises stress (VMS) and the maximum principal stress, and compared to the reported FE and strain gauge data. Our qualitative stress analysis indicates that occlusal forces distribute through the mid-facial skeleton along five vertical and two horizontal buttresses. We demonstrated that cortical bone has a priority in the transfer of occlusal load in the anterior maxilla, whereas both cortical and trabecular bone in the posterior maxilla are equally involved in performing this task Observed site dependence of the occlusal load distribution may help clinicians in creating strategies for implantology and orthodontic treatments. Additionally, the magnitude of VMS in our model was significantly lower in comparison to previous FE models composed only of cortical bone. This finding suggests that both cortical and trabecular bone should be modeled whenever stress will be quantitatively analyzed.
PB  - Elsevier Gmbh, Munich
T2  - Annals of Anatomy - Anatomischer Anzeiger
T1  - Occlusal load distribution through the cortical and trabecular bone of the human mid-facial skeleton in natural dentition: A three-dimensional finite element study
VL  - 197
SP  - 16
EP  - 23
DO  - 10.1016/j.aanat.2014.09.002
ER  - 

@article{
author = "Janović, Aleksa and Saveljić, Igor and Vukicević, Arso M. and Nikolić, Dalibor and Rakočević, Zoran and Jovicić, Gordana and Filipović, Nenad and Đurić, Marija",
year = "2015",
abstract = "Understanding of the occlusal load distribution through the mid-facial skeleton in natural dentition is essential because alterations in magnitude and/or direction of occlusal forces may cause remarkable changes in cortical and trabecular bone structure. Previous analyses by strain gauge technique, photoelastic and, more recently, finite element (FE) methods provided no direct evidence for occlusal load distribution through the cortical and trabecular bone compartments individually. Therefore, we developed an improved three-dimensional FE model of the human skull in order to clarify the distribution of occlusal forces through the cortical and trabecular bone during habitual masticatory activities. Particular focus was placed on the load transfer through the anterior and posterior maxilla. The results were presented in von Mises stress (VMS) and the maximum principal stress, and compared to the reported FE and strain gauge data. Our qualitative stress analysis indicates that occlusal forces distribute through the mid-facial skeleton along five vertical and two horizontal buttresses. We demonstrated that cortical bone has a priority in the transfer of occlusal load in the anterior maxilla, whereas both cortical and trabecular bone in the posterior maxilla are equally involved in performing this task Observed site dependence of the occlusal load distribution may help clinicians in creating strategies for implantology and orthodontic treatments. Additionally, the magnitude of VMS in our model was significantly lower in comparison to previous FE models composed only of cortical bone. This finding suggests that both cortical and trabecular bone should be modeled whenever stress will be quantitatively analyzed.",
publisher = "Elsevier Gmbh, Munich",
journal = "Annals of Anatomy - Anatomischer Anzeiger",
title = "Occlusal load distribution through the cortical and trabecular bone of the human mid-facial skeleton in natural dentition: A three-dimensional finite element study",
volume = "197",
pages = "16-23",
doi = "10.1016/j.aanat.2014.09.002"
}

Janović, A., Saveljić, I., Vukicević, A. M., Nikolić, D., Rakočević, Z., Jovicić, G., Filipović, N.,& Đurić, M.. (2015). Occlusal load distribution through the cortical and trabecular bone of the human mid-facial skeleton in natural dentition: A three-dimensional finite element study. in Annals of Anatomy - Anatomischer Anzeiger
Elsevier Gmbh, Munich., 197, 16-23.
https://doi.org/10.1016/j.aanat.2014.09.002

Janović A, Saveljić I, Vukicević AM, Nikolić D, Rakočević Z, Jovicić G, Filipović N, Đurić M. Occlusal load distribution through the cortical and trabecular bone of the human mid-facial skeleton in natural dentition: A three-dimensional finite element study. in Annals of Anatomy - Anatomischer Anzeiger. 2015;197:16-23.
doi:10.1016/j.aanat.2014.09.002 .

Janović, Aleksa, Saveljić, Igor, Vukicević, Arso M., Nikolić, Dalibor, Rakočević, Zoran, Jovicić, Gordana, Filipović, Nenad, Đurić, Marija, "Occlusal load distribution through the cortical and trabecular bone of the human mid-facial skeleton in natural dentition: A three-dimensional finite element study" in Annals of Anatomy - Anatomischer Anzeiger, 197 (2015):16-23,
https://doi.org/10.1016/j.aanat.2014.09.002 . .

TY  - JOUR
AU  - Antić, Svetlana
AU  - Vukicević, Arso M.
AU  - Milasinović, Marko
AU  - Saveljić, Igor
AU  - Jovicić, Gordana
AU  - Filipović, Nenad
AU  - Rakočević, Zoran
AU  - Đurić, Marija
PY  - 2015
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1971
AB  - The aim of the present study was to investigate the influences of the presence and position of a lower third molar (M3) on the fragility of mandibular angle and condyle, using finite element analysis. From computed tomographic scans of a human mandible with normally erupted M3, two additional virtual models were generated: a mandibular model with partially impacted M3 and a model without M3. Two cases of impact were considered: a frontal and a lateral blow. The results are based on the chromatic analysis of the distributed von Mises and principal stresses, and calculation of their failure indices. In the frontal blow, the angle region showed the highest stress in the case with partially impacted M3, and the condylar region in the case without M3. Compressive stresses were dominant but caused no failure. Tensile stresses were recorded in the retromolar areas, but caused failure only in the case with partially impacted M3. In the lateral blow, the stress concentrated at the point of impact, in the ipsilateral and contralateral angle and condylar regions. The highest stresses were recorded in the case with partially impacted M3. Tensile stresses caused the failure on the ipsilateral side, whereas compressive stresses on the contralateral side.
PB  - Churchill Livingstone, Edinburgh
T2  - Journal of Cranio-Maxillofacial Surgery
T1  - Impact of the lower third molar presence and position on the fragility of mandibular angle and condyle: A Three-dimensional finite element study
VL  - 43
IS  - 6
SP  - 870
EP  - 878
DO  - 10.1016/j.jcms.2015.03.025
ER  - 

@article{
author = "Antić, Svetlana and Vukicević, Arso M. and Milasinović, Marko and Saveljić, Igor and Jovicić, Gordana and Filipović, Nenad and Rakočević, Zoran and Đurić, Marija",
year = "2015",
abstract = "The aim of the present study was to investigate the influences of the presence and position of a lower third molar (M3) on the fragility of mandibular angle and condyle, using finite element analysis. From computed tomographic scans of a human mandible with normally erupted M3, two additional virtual models were generated: a mandibular model with partially impacted M3 and a model without M3. Two cases of impact were considered: a frontal and a lateral blow. The results are based on the chromatic analysis of the distributed von Mises and principal stresses, and calculation of their failure indices. In the frontal blow, the angle region showed the highest stress in the case with partially impacted M3, and the condylar region in the case without M3. Compressive stresses were dominant but caused no failure. Tensile stresses were recorded in the retromolar areas, but caused failure only in the case with partially impacted M3. In the lateral blow, the stress concentrated at the point of impact, in the ipsilateral and contralateral angle and condylar regions. The highest stresses were recorded in the case with partially impacted M3. Tensile stresses caused the failure on the ipsilateral side, whereas compressive stresses on the contralateral side.",
publisher = "Churchill Livingstone, Edinburgh",
journal = "Journal of Cranio-Maxillofacial Surgery",
title = "Impact of the lower third molar presence and position on the fragility of mandibular angle and condyle: A Three-dimensional finite element study",
volume = "43",
number = "6",
pages = "870-878",
doi = "10.1016/j.jcms.2015.03.025"
}

Antić, S., Vukicević, A. M., Milasinović, M., Saveljić, I., Jovicić, G., Filipović, N., Rakočević, Z.,& Đurić, M.. (2015). Impact of the lower third molar presence and position on the fragility of mandibular angle and condyle: A Three-dimensional finite element study. in Journal of Cranio-Maxillofacial Surgery
Churchill Livingstone, Edinburgh., 43(6), 870-878.
https://doi.org/10.1016/j.jcms.2015.03.025

Antić S, Vukicević AM, Milasinović M, Saveljić I, Jovicić G, Filipović N, Rakočević Z, Đurić M. Impact of the lower third molar presence and position on the fragility of mandibular angle and condyle: A Three-dimensional finite element study. in Journal of Cranio-Maxillofacial Surgery. 2015;43(6):870-878.
doi:10.1016/j.jcms.2015.03.025 .

Antić, Svetlana, Vukicević, Arso M., Milasinović, Marko, Saveljić, Igor, Jovicić, Gordana, Filipović, Nenad, Rakočević, Zoran, Đurić, Marija, "Impact of the lower third molar presence and position on the fragility of mandibular angle and condyle: A Three-dimensional finite element study" in Journal of Cranio-Maxillofacial Surgery, 43, no. 6 (2015):870-878,
https://doi.org/10.1016/j.jcms.2015.03.025 . .

TY  - JOUR
AU  - Gačić, Bojan
AU  - Stojčev-Stajčić, Ljiljana
AU  - Đinić, Ana
AU  - Kalanović, Milena
AU  - Ilić, Branislav
AU  - Rebić, Kristina
PY  - 2015
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/2064
AB  - Normal bone healing after tooth extraction includes the following steps: blood clot forming, granulation, bone forming and final bone reorganization. In clinical settings connective tissue infiltration of extraction socket can result in fibrous scar formation rather than bone healing. Local and systemic factors seem to be major contributors to the occurrence of erratic socket healing. The aim of this case report was to describe oral-surgery treatment of a patient with inadequate bone and soft supportive tissue for prosthetic rehabilitation. Surgical procedure and recovery are presented, including final complete denture rehabilitation.
AB  - Nakon vađenja zuba obično slede brza organizacija koaguluma, formiranje granulacionog tkiva, osteoida, a zatim i zrele lamelarne kosti. Međutim, klinički se neretko može sresti infiltracija ekstrakcione alveole vezivnim tkivom, uz stvaranje fibroznog ožiljka umesto novostvoren kosti. Za to su odgovorni brojni lokalni i sistemski faktori koji doprinose nepravilnom zarastanju ekstrakcione alveole. Cilj ovog rada je bio da se opiše oralnohirurško lečenje pacijenta s neodgovarajućim stanjem koštanog i mekog nosećeg tkiva gornje totalne proteze. Prikazani su hirurški postupak i postoperacioni tok, zaključno s konačnim odgovarajućim protetičkim zbrinjavanjem pacijenta, koji je doveo do pravilnog zarastanja rane i time zadovoljavajuće protetičke rehabilitacije.
PB  - Srpsko lekarsko društvo - Stomatološka sekcija, Beograd
T2  - Stomatološki glasnik Srbije
T1  - Inadequate prosthetic rehabilitation caused by fibrous and bone hyperplasia of maxilla: Case report
T1  - Ugrožena protetička rehabilitacija usled fibrozne i koštane hiperplazije gornje vilice - prikaz pacijenta
VL  - 62
IS  - 1
SP  - 34
EP  - 39
DO  - 10.1515/sdj-2015-0005
ER  - 

@article{
author = "Gačić, Bojan and Stojčev-Stajčić, Ljiljana and Đinić, Ana and Kalanović, Milena and Ilić, Branislav and Rebić, Kristina",
year = "2015",
abstract = "Normal bone healing after tooth extraction includes the following steps: blood clot forming, granulation, bone forming and final bone reorganization. In clinical settings connective tissue infiltration of extraction socket can result in fibrous scar formation rather than bone healing. Local and systemic factors seem to be major contributors to the occurrence of erratic socket healing. The aim of this case report was to describe oral-surgery treatment of a patient with inadequate bone and soft supportive tissue for prosthetic rehabilitation. Surgical procedure and recovery are presented, including final complete denture rehabilitation., Nakon vađenja zuba obično slede brza organizacija koaguluma, formiranje granulacionog tkiva, osteoida, a zatim i zrele lamelarne kosti. Međutim, klinički se neretko može sresti infiltracija ekstrakcione alveole vezivnim tkivom, uz stvaranje fibroznog ožiljka umesto novostvoren kosti. Za to su odgovorni brojni lokalni i sistemski faktori koji doprinose nepravilnom zarastanju ekstrakcione alveole. Cilj ovog rada je bio da se opiše oralnohirurško lečenje pacijenta s neodgovarajućim stanjem koštanog i mekog nosećeg tkiva gornje totalne proteze. Prikazani su hirurški postupak i postoperacioni tok, zaključno s konačnim odgovarajućim protetičkim zbrinjavanjem pacijenta, koji je doveo do pravilnog zarastanja rane i time zadovoljavajuće protetičke rehabilitacije.",
publisher = "Srpsko lekarsko društvo - Stomatološka sekcija, Beograd",
journal = "Stomatološki glasnik Srbije",
title = "Inadequate prosthetic rehabilitation caused by fibrous and bone hyperplasia of maxilla: Case report, Ugrožena protetička rehabilitacija usled fibrozne i koštane hiperplazije gornje vilice - prikaz pacijenta",
volume = "62",
number = "1",
pages = "34-39",
doi = "10.1515/sdj-2015-0005"
}

Gačić, B., Stojčev-Stajčić, L., Đinić, A., Kalanović, M., Ilić, B.,& Rebić, K.. (2015). Inadequate prosthetic rehabilitation caused by fibrous and bone hyperplasia of maxilla: Case report. in Stomatološki glasnik Srbije
Srpsko lekarsko društvo - Stomatološka sekcija, Beograd., 62(1), 34-39.
https://doi.org/10.1515/sdj-2015-0005

Gačić B, Stojčev-Stajčić L, Đinić A, Kalanović M, Ilić B, Rebić K. Inadequate prosthetic rehabilitation caused by fibrous and bone hyperplasia of maxilla: Case report. in Stomatološki glasnik Srbije. 2015;62(1):34-39.
doi:10.1515/sdj-2015-0005 .

Gačić, Bojan, Stojčev-Stajčić, Ljiljana, Đinić, Ana, Kalanović, Milena, Ilić, Branislav, Rebić, Kristina, "Inadequate prosthetic rehabilitation caused by fibrous and bone hyperplasia of maxilla: Case report" in Stomatološki glasnik Srbije, 62, no. 1 (2015):34-39,
https://doi.org/10.1515/sdj-2015-0005 . .

TY  - JOUR
AU  - Vukcević, G.
AU  - Volarević, Vladislav
AU  - Raicević, S.
AU  - Tanasković, I.
AU  - Miličić, Biljana
AU  - Vulović, T.
AU  - Arsenijević, Slobodan
PY  - 2014
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1950
AB  - In this study, we describe a new semi-quantitative method for measuring the extent of bleeding in pathohistological tissue samples. To test our novel method, we recruited 120 female patients in their first trimester of pregnancy and divided them into three groups of 40. Group I was the control group, in which no dilation was applied. Group II was an experimental group, in which dilation was performed using classical mechanical dilators. Group III was also an experimental group, in which dilation was performed using a hydraulic dilator. Tissue samples were taken from the patients' cervical canals using a Novak's probe via energetic single-step curettage prior to any dilation in Group I and after dilation in Groups II and III. After the tissue samples were prepared, light microscopy was used to obtain microphotographs at 100x magnification. The surfaces affected by bleeding were measured in the microphotographs using the Autodesk AutoCAD 2009 program and its "polylines" function. The lines were used to mark the area around the entire sample (marked A) and to create "polyline" areas around each bleeding area on the sample (marked B). The percentage of the total area affected by bleeding was calculated using the formula: N=Bt x 100 / At where N is the percentage (%) of the tissue sample surface affected by bleeding, At (A total) is the sum of the surfaces of all of the tissue samples and Bt (B total) is the sum of all the surfaces affected by bleeding in all of the tissue samples. This novel semi-quantitative method utilizes the Autodesk AutoCAD 2009 program, which is simple to use and widely available, thereby offering a new, objective and precise approach to estimate the extent of bleeding in tissue samples.
PB  - F Hernandez, Murcia
T2  - Histology & Histopathology
T1  - A novel semi-quantitative method for measuring tissue bleeding
VL  - 29
IS  - 3
SP  - 353
EP  - 360
UR  - https://hdl.handle.net/21.15107/rcub_smile_1950
ER  - 

@article{
author = "Vukcević, G. and Volarević, Vladislav and Raicević, S. and Tanasković, I. and Miličić, Biljana and Vulović, T. and Arsenijević, Slobodan",
year = "2014",
abstract = "In this study, we describe a new semi-quantitative method for measuring the extent of bleeding in pathohistological tissue samples. To test our novel method, we recruited 120 female patients in their first trimester of pregnancy and divided them into three groups of 40. Group I was the control group, in which no dilation was applied. Group II was an experimental group, in which dilation was performed using classical mechanical dilators. Group III was also an experimental group, in which dilation was performed using a hydraulic dilator. Tissue samples were taken from the patients' cervical canals using a Novak's probe via energetic single-step curettage prior to any dilation in Group I and after dilation in Groups II and III. After the tissue samples were prepared, light microscopy was used to obtain microphotographs at 100x magnification. The surfaces affected by bleeding were measured in the microphotographs using the Autodesk AutoCAD 2009 program and its "polylines" function. The lines were used to mark the area around the entire sample (marked A) and to create "polyline" areas around each bleeding area on the sample (marked B). The percentage of the total area affected by bleeding was calculated using the formula: N=Bt x 100 / At where N is the percentage (%) of the tissue sample surface affected by bleeding, At (A total) is the sum of the surfaces of all of the tissue samples and Bt (B total) is the sum of all the surfaces affected by bleeding in all of the tissue samples. This novel semi-quantitative method utilizes the Autodesk AutoCAD 2009 program, which is simple to use and widely available, thereby offering a new, objective and precise approach to estimate the extent of bleeding in tissue samples.",
publisher = "F Hernandez, Murcia",
journal = "Histology & Histopathology",
title = "A novel semi-quantitative method for measuring tissue bleeding",
volume = "29",
number = "3",
pages = "353-360",
url = "https://hdl.handle.net/21.15107/rcub_smile_1950"
}

Vukcević, G., Volarević, V., Raicević, S., Tanasković, I., Miličić, B., Vulović, T.,& Arsenijević, S.. (2014). A novel semi-quantitative method for measuring tissue bleeding. in Histology & Histopathology
F Hernandez, Murcia., 29(3), 353-360.
https://hdl.handle.net/21.15107/rcub_smile_1950

Vukcević G, Volarević V, Raicević S, Tanasković I, Miličić B, Vulović T, Arsenijević S. A novel semi-quantitative method for measuring tissue bleeding. in Histology & Histopathology. 2014;29(3):353-360.
https://hdl.handle.net/21.15107/rcub_smile_1950 .

Vukcević, G., Volarević, Vladislav, Raicević, S., Tanasković, I., Miličić, Biljana, Vulović, T., Arsenijević, Slobodan, "A novel semi-quantitative method for measuring tissue bleeding" in Histology & Histopathology, 29, no. 3 (2014):353-360,
https://hdl.handle.net/21.15107/rcub_smile_1950 .

TY  - JOUR
AU  - Marković, Aleksa
AU  - Luis Calvo-Guirado, Jose
AU  - Lazić, Zoran
AU  - Gomez-Moreno, Gerardo
AU  - Ćalasan, Dejan
AU  - Guardia, Javier
AU  - Čolić, Snježana
AU  - Aguilar-Salvatierra, Antonio
AU  - Gačić, Bojan
AU  - Delgado-Ruiz, Rafael
AU  - Janjić, Bojan
AU  - Mišić, Tijana
PY  - 2013
UR  - https://smile.stomf.bg.ac.rs/handle/123456789/1816
AB  - Purpose: The aim of this study was to investigate the relationship between surgical techniques and implant macro-design (self-tapping/non-self-tapping) for the optimization of implant stability in the low-density bone present in the posterior maxilla using resonance frequency analysis (RFA). Materials and Methods: A total of 102 implants were studied. Fifty-six self-tapping BlueSkyBredent (R) (Bredent GmbH &, Senden, Germany) and 56 non-self-tapping Standard Plus Straumann (R) (Institut Straumann AG (R), Waldenburg, Switzerland) were placed in the posterior segment of the maxilla. Implants of both types were placed in sites prepared with either lateral bone-condensing or with bone-drilling techniques. Implant stability measurements were performed using RFA immediately after implant placement and weekly during a 12-week follow-up period. Results: Both types of implants placed after bone condensing achieved significantly higher stability immediately after surgery, as well as during the entire 12-week observation period compared with those placed following bone drilling. After bone condensation, there were no significant differences in primary stability or in implant stability after the first week between both implant types. From 2 to 12 postoperative weeks, significantly higher stability was shown by self-tapping implants. After bone drilling, self-tapping implants achieved significantly higher stability than non-self-tapping implants during the entire follow-up period. Conclusions: The outcomes of the present study indicate that bone drilling is not an effective technique for improving implant stability and, following this technique, the use of self-tapping implants is highly recommended. Implant stability optimization in the soft bone can be achieved by lateral bone-condensing technique, regardless of implant macro-design.
PB  - Wiley, Hoboken
T2  - Clinical Implant Dentistry & Related Research
T1  - Evaluation of Primary Stability of Self-Tapping and Non-Self-Tapping Dental Implants. A 12-Week Clinical Study
VL  - 15
IS  - 3
SP  - 341
EP  - 349
DO  - 10.1111/j.1708-8208.2011.00415.x
ER  - 

@article{
author = "Marković, Aleksa and Luis Calvo-Guirado, Jose and Lazić, Zoran and Gomez-Moreno, Gerardo and Ćalasan, Dejan and Guardia, Javier and Čolić, Snježana and Aguilar-Salvatierra, Antonio and Gačić, Bojan and Delgado-Ruiz, Rafael and Janjić, Bojan and Mišić, Tijana",
year = "2013",
abstract = "Purpose: The aim of this study was to investigate the relationship between surgical techniques and implant macro-design (self-tapping/non-self-tapping) for the optimization of implant stability in the low-density bone present in the posterior maxilla using resonance frequency analysis (RFA). Materials and Methods: A total of 102 implants were studied. Fifty-six self-tapping BlueSkyBredent (R) (Bredent GmbH &, Senden, Germany) and 56 non-self-tapping Standard Plus Straumann (R) (Institut Straumann AG (R), Waldenburg, Switzerland) were placed in the posterior segment of the maxilla. Implants of both types were placed in sites prepared with either lateral bone-condensing or with bone-drilling techniques. Implant stability measurements were performed using RFA immediately after implant placement and weekly during a 12-week follow-up period. Results: Both types of implants placed after bone condensing achieved significantly higher stability immediately after surgery, as well as during the entire 12-week observation period compared with those placed following bone drilling. After bone condensation, there were no significant differences in primary stability or in implant stability after the first week between both implant types. From 2 to 12 postoperative weeks, significantly higher stability was shown by self-tapping implants. After bone drilling, self-tapping implants achieved significantly higher stability than non-self-tapping implants during the entire follow-up period. Conclusions: The outcomes of the present study indicate that bone drilling is not an effective technique for improving implant stability and, following this technique, the use of self-tapping implants is highly recommended. Implant stability optimization in the soft bone can be achieved by lateral bone-condensing technique, regardless of implant macro-design.",
publisher = "Wiley, Hoboken",
journal = "Clinical Implant Dentistry & Related Research",
title = "Evaluation of Primary Stability of Self-Tapping and Non-Self-Tapping Dental Implants. A 12-Week Clinical Study",
volume = "15",
number = "3",
pages = "341-349",
doi = "10.1111/j.1708-8208.2011.00415.x"
}

Marković, A., Luis Calvo-Guirado, J., Lazić, Z., Gomez-Moreno, G., Ćalasan, D., Guardia, J., Čolić, S., Aguilar-Salvatierra, A., Gačić, B., Delgado-Ruiz, R., Janjić, B.,& Mišić, T.. (2013). Evaluation of Primary Stability of Self-Tapping and Non-Self-Tapping Dental Implants. A 12-Week Clinical Study. in Clinical Implant Dentistry & Related Research
Wiley, Hoboken., 15(3), 341-349.
https://doi.org/10.1111/j.1708-8208.2011.00415.x

Marković A, Luis Calvo-Guirado J, Lazić Z, Gomez-Moreno G, Ćalasan D, Guardia J, Čolić S, Aguilar-Salvatierra A, Gačić B, Delgado-Ruiz R, Janjić B, Mišić T. Evaluation of Primary Stability of Self-Tapping and Non-Self-Tapping Dental Implants. A 12-Week Clinical Study. in Clinical Implant Dentistry & Related Research. 2013;15(3):341-349.
doi:10.1111/j.1708-8208.2011.00415.x .

Marković, Aleksa, Luis Calvo-Guirado, Jose, Lazić, Zoran, Gomez-Moreno, Gerardo, Ćalasan, Dejan, Guardia, Javier, Čolić, Snježana, Aguilar-Salvatierra, Antonio, Gačić, Bojan, Delgado-Ruiz, Rafael, Janjić, Bojan, Mišić, Tijana, "Evaluation of Primary Stability of Self-Tapping and Non-Self-Tapping Dental Implants. A 12-Week Clinical Study" in Clinical Implant Dentistry & Related Research, 15, no. 3 (2013):341-349,
https://doi.org/10.1111/j.1708-8208.2011.00415.x . .