The samples of the Cu-C composite were produced by two different techniques (i) the sintering of powders, and (ii) the internal carbonization of rapidly solidified pure copper. The aim of the present research was to produce a discontinuous Cu-C composite with the submicron dispersion of graphite particles. The results of our microstructural investigation show that the use of the mechanical alloying and sintering of consolidated powders is an inappropriate way to achieve a submicron dispersion of the graphite particles. On the other hand, the combination of rapid solidification and internal carbonization was found to be an efficient technique to obtain the requested microstructure.
TY - JOUR
AU - Rudolf, Rebeka
AU - Anžel, Ivan
AU - Lazić, Vojkan
AU - Stojić, D.
PY - 2007
UR - https://smile.stomf.bg.ac.rs/handle/123456789/1341
AB - The samples of the Cu-C composite were produced by two different techniques (i) the sintering of powders, and (ii) the internal carbonization of rapidly solidified pure copper. The aim of the present research was to produce a discontinuous Cu-C composite with the submicron dispersion of graphite particles. The results of our microstructural investigation show that the use of the mechanical alloying and sintering of consolidated powders is an inappropriate way to achieve a submicron dispersion of the graphite particles. On the other hand, the combination of rapid solidification and internal carbonization was found to be an efficient technique to obtain the requested microstructure.
PB - Savez inženjera metalurgije Srbije, Beograd
T2 - Metalurgija
T1 - The new approach of the production technique of discontinuous Cu-C composite
VL - 13
IS - 2
SP - 107
EP - 115
UR - https://hdl.handle.net/21.15107/rcub_smile_1341
ER -
@article{
author = "Rudolf, Rebeka and Anžel, Ivan and Lazić, Vojkan and Stojić, D.",
year = "2007",
abstract = "The samples of the Cu-C composite were produced by two different techniques (i) the sintering of powders, and (ii) the internal carbonization of rapidly solidified pure copper. The aim of the present research was to produce a discontinuous Cu-C composite with the submicron dispersion of graphite particles. The results of our microstructural investigation show that the use of the mechanical alloying and sintering of consolidated powders is an inappropriate way to achieve a submicron dispersion of the graphite particles. On the other hand, the combination of rapid solidification and internal carbonization was found to be an efficient technique to obtain the requested microstructure.",
publisher = "Savez inženjera metalurgije Srbije, Beograd",
journal = "Metalurgija",
title = "The new approach of the production technique of discontinuous Cu-C composite",
volume = "13",
number = "2",
pages = "107-115",
url = "https://hdl.handle.net/21.15107/rcub_smile_1341"
}
Rudolf, R., Anžel, I., Lazić, V.,& Stojić, D.. (2007). The new approach of the production technique of discontinuous Cu-C composite. in Metalurgija
Savez inženjera metalurgije Srbije, Beograd., 13(2), 107-115.
https://hdl.handle.net/21.15107/rcub_smile_1341
Rudolf R, Anžel I, Lazić V, Stojić D. The new approach of the production technique of discontinuous Cu-C composite. in Metalurgija. 2007;13(2):107-115.
https://hdl.handle.net/21.15107/rcub_smile_1341 .
Rudolf, Rebeka, Anžel, Ivan, Lazić, Vojkan, Stojić, D., "The new approach of the production technique of discontinuous Cu-C composite" in Metalurgija, 13, no. 2 (2007):107-115,
https://hdl.handle.net/21.15107/rcub_smile_1341 .
