Heat generation during implant placement in low-density bone: effect of surgical technique, insertion torque and implant macro design
Authorized Users Only
2013
Authors
Marković, Aleksa
Mišić, Tijana
Miličić, Biljana

Calvo Guirado, Jose Luis

Aleksić, Zoran
Đinić, Ana

Article (Published version)

Metadata
Show full item recordAbstract
Objectives The study aimed to investigate the effect of surgical technique, implant macrodesign and insertion torque on bone temperature changes during implant placement. Material and methods In the in vitro study, 144 self-tapping (blueSKY (R) 4x10mm; Bredent) and 144 non-self-tapping (Standard implant (R) 4.1x10mm; Straumann) were placed in osteotomies prepared in pig ribs by lateral bone condensing or bone drilling techniques. The maximum insertion torque values of 30, 35 and 40Ncm were used. Real-time bone temperature measurement during implant placement was performed by three thermocouples positioned vertically, in tripod configuration around every osteotomy, at a distance of 5mm from it and at depths of 1, 5 and 10mm. Data were analysed using Kruskal-Wallis, Mann-Whitney U-tests and Regression analysis. Results Significant predictor of bone temperature at the osteotomy depth of 1mm was insertion torque (P=0.003) and at the depth of 10-mm implant macrodesign (P=0.029), while no si...gnificant predictor at depth of 5mm was identified (0.05). Higher insertion torque values as well as non-self-tapping implant macrodesign were related to higher temperatures. Implant placement in sites prepared by bone drilling induced significantly higher temperature increase (P=0.021) compared with bone condensing sites at the depth of 5mm, while no significant difference was recorded at other depths. Compared with 30Ncm, insertion torque values of 35 and 40Ncm produced significantly higher temperature increase (P=0.005; P=0.003, respectively) at the depth of 1mm. There was no significant difference in temperature change induced by 35 and 40Ncm, neither by implant macrodesign at all investigated depths (0.05). Conclusions Placement of self-tapping implants with low insertion torque into sites prepared by lateral bone condensing technique might be advantageous in terms of thermal effect on bone.
Keywords:
bone temperature / implant macrodesign / implant placement / insertion torque / low-density bone / surgical technique / thermocouple technologySource:
Clinical Oral Implants Research, 2013, 24, 7, 798-805Publisher:
- Wiley-Blackwell, Hoboken
Funding / projects:
DOI: 10.1111/j.1600-0501.2012.02460.x
ISSN: 0905-7161
PubMed: 22469169
WoS: 000319998500013
Scopus: 2-s2.0-84878740318
Collections
Institution/Community
Stomatološki fakultetTY - JOUR AU - Marković, Aleksa AU - Mišić, Tijana AU - Miličić, Biljana AU - Calvo Guirado, Jose Luis AU - Aleksić, Zoran AU - Đinić, Ana PY - 2013 UR - https://smile.stomf.bg.ac.rs/handle/123456789/1830 AB - Objectives The study aimed to investigate the effect of surgical technique, implant macrodesign and insertion torque on bone temperature changes during implant placement. Material and methods In the in vitro study, 144 self-tapping (blueSKY (R) 4x10mm; Bredent) and 144 non-self-tapping (Standard implant (R) 4.1x10mm; Straumann) were placed in osteotomies prepared in pig ribs by lateral bone condensing or bone drilling techniques. The maximum insertion torque values of 30, 35 and 40Ncm were used. Real-time bone temperature measurement during implant placement was performed by three thermocouples positioned vertically, in tripod configuration around every osteotomy, at a distance of 5mm from it and at depths of 1, 5 and 10mm. Data were analysed using Kruskal-Wallis, Mann-Whitney U-tests and Regression analysis. Results Significant predictor of bone temperature at the osteotomy depth of 1mm was insertion torque (P=0.003) and at the depth of 10-mm implant macrodesign (P=0.029), while no significant predictor at depth of 5mm was identified (0.05). Higher insertion torque values as well as non-self-tapping implant macrodesign were related to higher temperatures. Implant placement in sites prepared by bone drilling induced significantly higher temperature increase (P=0.021) compared with bone condensing sites at the depth of 5mm, while no significant difference was recorded at other depths. Compared with 30Ncm, insertion torque values of 35 and 40Ncm produced significantly higher temperature increase (P=0.005; P=0.003, respectively) at the depth of 1mm. There was no significant difference in temperature change induced by 35 and 40Ncm, neither by implant macrodesign at all investigated depths (0.05). Conclusions Placement of self-tapping implants with low insertion torque into sites prepared by lateral bone condensing technique might be advantageous in terms of thermal effect on bone. PB - Wiley-Blackwell, Hoboken T2 - Clinical Oral Implants Research T1 - Heat generation during implant placement in low-density bone: effect of surgical technique, insertion torque and implant macro design VL - 24 IS - 7 SP - 798 EP - 805 DO - 10.1111/j.1600-0501.2012.02460.x ER -
@article{ author = "Marković, Aleksa and Mišić, Tijana and Miličić, Biljana and Calvo Guirado, Jose Luis and Aleksić, Zoran and Đinić, Ana", year = "2013", abstract = "Objectives The study aimed to investigate the effect of surgical technique, implant macrodesign and insertion torque on bone temperature changes during implant placement. Material and methods In the in vitro study, 144 self-tapping (blueSKY (R) 4x10mm; Bredent) and 144 non-self-tapping (Standard implant (R) 4.1x10mm; Straumann) were placed in osteotomies prepared in pig ribs by lateral bone condensing or bone drilling techniques. The maximum insertion torque values of 30, 35 and 40Ncm were used. Real-time bone temperature measurement during implant placement was performed by three thermocouples positioned vertically, in tripod configuration around every osteotomy, at a distance of 5mm from it and at depths of 1, 5 and 10mm. Data were analysed using Kruskal-Wallis, Mann-Whitney U-tests and Regression analysis. Results Significant predictor of bone temperature at the osteotomy depth of 1mm was insertion torque (P=0.003) and at the depth of 10-mm implant macrodesign (P=0.029), while no significant predictor at depth of 5mm was identified (0.05). Higher insertion torque values as well as non-self-tapping implant macrodesign were related to higher temperatures. Implant placement in sites prepared by bone drilling induced significantly higher temperature increase (P=0.021) compared with bone condensing sites at the depth of 5mm, while no significant difference was recorded at other depths. Compared with 30Ncm, insertion torque values of 35 and 40Ncm produced significantly higher temperature increase (P=0.005; P=0.003, respectively) at the depth of 1mm. There was no significant difference in temperature change induced by 35 and 40Ncm, neither by implant macrodesign at all investigated depths (0.05). Conclusions Placement of self-tapping implants with low insertion torque into sites prepared by lateral bone condensing technique might be advantageous in terms of thermal effect on bone.", publisher = "Wiley-Blackwell, Hoboken", journal = "Clinical Oral Implants Research", title = "Heat generation during implant placement in low-density bone: effect of surgical technique, insertion torque and implant macro design", volume = "24", number = "7", pages = "798-805", doi = "10.1111/j.1600-0501.2012.02460.x" }
Marković, A., Mišić, T., Miličić, B., Calvo Guirado, J. L., Aleksić, Z.,& Đinić, A.. (2013). Heat generation during implant placement in low-density bone: effect of surgical technique, insertion torque and implant macro design. in Clinical Oral Implants Research Wiley-Blackwell, Hoboken., 24(7), 798-805. https://doi.org/10.1111/j.1600-0501.2012.02460.x
Marković A, Mišić T, Miličić B, Calvo Guirado JL, Aleksić Z, Đinić A. Heat generation during implant placement in low-density bone: effect of surgical technique, insertion torque and implant macro design. in Clinical Oral Implants Research. 2013;24(7):798-805. doi:10.1111/j.1600-0501.2012.02460.x .
Marković, Aleksa, Mišić, Tijana, Miličić, Biljana, Calvo Guirado, Jose Luis, Aleksić, Zoran, Đinić, Ana, "Heat generation during implant placement in low-density bone: effect of surgical technique, insertion torque and implant macro design" in Clinical Oral Implants Research, 24, no. 7 (2013):798-805, https://doi.org/10.1111/j.1600-0501.2012.02460.x . .