Objective. To study the effect of a low-shrinkage methacrylate monomer and monoacylphosphine oxide photoinitiator on color, translucency, and color stability of model resin-based composites (RBCs). Methods. Four micro-hybrid RBCs were prepared containing barium-glass fillers in bisphenol A-glycidyl-methacrylate (BisGMA) and triethyleneglycol-dimethacrylate (TEGDMA) or urethane-based low-shrinkage monomer FIT-852 (FIT; Esstech Inc.) and TEGDMA matrix. Camphorquinone (CQ)/amine or Lucirin TPO were used as photoinitiators. Commercial low-shrinkage RBCs (Charisma Diamond, Heraeus Kulzer and N'Durance, Septodont) and conventional RBCs (Tetric EvoCeram, Ivoclar Vivadent and Filtek Z250, 3M ESPE) were used as controls. Color and translucency were measured using Thermo Scientific Evolution (Thermo Fisher Scientific) and SpectroShade (TM) Micro (MHT Optic Research) spectrophotometers. Color stability was evaluated after immersion in black tea (pure, with milk or lemon) and distilled water. Data... were analyzed using analyses of variance with Tukey's post-test (alpha = 0.05). Results. Photoinitiators had no significant effect on baseline color. Initially whiter FIT-based RBCs showed greater staining in all staining solutions than BisGMA-based RBCs. TPO-containing RBCs showed better color stability than CQ-containing RBCs irrespective of the base monomer. Tea and tea with lemon induced greatest color changes. Adding milk to tea significantly reduced material staining. Significance. Urethane-based low-shrinkage monomer FIT and conventional BisGMA affected color, translucency and color stability of their respective RBCs. Despite being used in posterior teeth, low-shrinkage RBCs are expected to have favorable optical and esthetic properties. Manufacturers are urged to provide information on optical properties of monomers and monomer mixtures in their low-shrinkage RBCs to allow understanding of interaction with fillers and photoinitiators.
TY - JOUR
AU - Manojlović, Dragica
AU - Dramićanin, Miroslav D.
AU - Ležaja, Maja
AU - Pongprueksa, Pong
AU - Van Meerbeek, Bart
AU - Miletić, Vesna
PY - 2016
UR - https://smile.stomf.bg.ac.rs/handle/123456789/2145
AB - Objective. To study the effect of a low-shrinkage methacrylate monomer and monoacylphosphine oxide photoinitiator on color, translucency, and color stability of model resin-based composites (RBCs). Methods. Four micro-hybrid RBCs were prepared containing barium-glass fillers in bisphenol A-glycidyl-methacrylate (BisGMA) and triethyleneglycol-dimethacrylate (TEGDMA) or urethane-based low-shrinkage monomer FIT-852 (FIT; Esstech Inc.) and TEGDMA matrix. Camphorquinone (CQ)/amine or Lucirin TPO were used as photoinitiators. Commercial low-shrinkage RBCs (Charisma Diamond, Heraeus Kulzer and N'Durance, Septodont) and conventional RBCs (Tetric EvoCeram, Ivoclar Vivadent and Filtek Z250, 3M ESPE) were used as controls. Color and translucency were measured using Thermo Scientific Evolution (Thermo Fisher Scientific) and SpectroShade (TM) Micro (MHT Optic Research) spectrophotometers. Color stability was evaluated after immersion in black tea (pure, with milk or lemon) and distilled water. Data were analyzed using analyses of variance with Tukey's post-test (alpha = 0.05). Results. Photoinitiators had no significant effect on baseline color. Initially whiter FIT-based RBCs showed greater staining in all staining solutions than BisGMA-based RBCs. TPO-containing RBCs showed better color stability than CQ-containing RBCs irrespective of the base monomer. Tea and tea with lemon induced greatest color changes. Adding milk to tea significantly reduced material staining. Significance. Urethane-based low-shrinkage monomer FIT and conventional BisGMA affected color, translucency and color stability of their respective RBCs. Despite being used in posterior teeth, low-shrinkage RBCs are expected to have favorable optical and esthetic properties. Manufacturers are urged to provide information on optical properties of monomers and monomer mixtures in their low-shrinkage RBCs to allow understanding of interaction with fillers and photoinitiators.
PB - Elsevier Sci Ltd, Oxford
T2 - Dental Materials
T1 - Effect of resin and photoinitiator on color, translucency and color stability of conventional and low-shrinkage model composites
VL - 32
IS - 2
SP - 183
EP - 191
DO - 10.1016/j.dental.2015.11.027
ER -
@article{
author = "Manojlović, Dragica and Dramićanin, Miroslav D. and Ležaja, Maja and Pongprueksa, Pong and Van Meerbeek, Bart and Miletić, Vesna",
year = "2016",
abstract = "Objective. To study the effect of a low-shrinkage methacrylate monomer and monoacylphosphine oxide photoinitiator on color, translucency, and color stability of model resin-based composites (RBCs). Methods. Four micro-hybrid RBCs were prepared containing barium-glass fillers in bisphenol A-glycidyl-methacrylate (BisGMA) and triethyleneglycol-dimethacrylate (TEGDMA) or urethane-based low-shrinkage monomer FIT-852 (FIT; Esstech Inc.) and TEGDMA matrix. Camphorquinone (CQ)/amine or Lucirin TPO were used as photoinitiators. Commercial low-shrinkage RBCs (Charisma Diamond, Heraeus Kulzer and N'Durance, Septodont) and conventional RBCs (Tetric EvoCeram, Ivoclar Vivadent and Filtek Z250, 3M ESPE) were used as controls. Color and translucency were measured using Thermo Scientific Evolution (Thermo Fisher Scientific) and SpectroShade (TM) Micro (MHT Optic Research) spectrophotometers. Color stability was evaluated after immersion in black tea (pure, with milk or lemon) and distilled water. Data were analyzed using analyses of variance with Tukey's post-test (alpha = 0.05). Results. Photoinitiators had no significant effect on baseline color. Initially whiter FIT-based RBCs showed greater staining in all staining solutions than BisGMA-based RBCs. TPO-containing RBCs showed better color stability than CQ-containing RBCs irrespective of the base monomer. Tea and tea with lemon induced greatest color changes. Adding milk to tea significantly reduced material staining. Significance. Urethane-based low-shrinkage monomer FIT and conventional BisGMA affected color, translucency and color stability of their respective RBCs. Despite being used in posterior teeth, low-shrinkage RBCs are expected to have favorable optical and esthetic properties. Manufacturers are urged to provide information on optical properties of monomers and monomer mixtures in their low-shrinkage RBCs to allow understanding of interaction with fillers and photoinitiators.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Dental Materials",
title = "Effect of resin and photoinitiator on color, translucency and color stability of conventional and low-shrinkage model composites",
volume = "32",
number = "2",
pages = "183-191",
doi = "10.1016/j.dental.2015.11.027"
}
Manojlović, D., Dramićanin, M. D., Ležaja, M., Pongprueksa, P., Van Meerbeek, B.,& Miletić, V.. (2016). Effect of resin and photoinitiator on color, translucency and color stability of conventional and low-shrinkage model composites. in Dental Materials
Elsevier Sci Ltd, Oxford., 32(2), 183-191.
https://doi.org/10.1016/j.dental.2015.11.027
Manojlović D, Dramićanin MD, Ležaja M, Pongprueksa P, Van Meerbeek B, Miletić V. Effect of resin and photoinitiator on color, translucency and color stability of conventional and low-shrinkage model composites. in Dental Materials. 2016;32(2):183-191.
doi:10.1016/j.dental.2015.11.027 .
Manojlović, Dragica, Dramićanin, Miroslav D., Ležaja, Maja, Pongprueksa, Pong, Van Meerbeek, Bart, Miletić, Vesna, "Effect of resin and photoinitiator on color, translucency and color stability of conventional and low-shrinkage model composites" in Dental Materials, 32, no. 2 (2016):183-191,
https://doi.org/10.1016/j.dental.2015.11.027 . .
