Приказ основних података о документу

Ispitivanje adhezije polimernih kompozitnih filmova na bazi Bis-GMA/TEGDMA na različitim metalnim podlogama

dc.creatorTomić, Nataša Z.
dc.creatorAlgellai, Ahmed A.
dc.creatorVuksanović, Marija M.
dc.creatorTrifunović, Dejan D.
dc.creatorDimitrijević, Silvana B.
dc.creatorObradović-Đuričić, Kosovka
dc.creatorJančić-Heinemann, Radmila M.
dc.date.accessioned2020-07-02T13:20:56Z
dc.date.available2020-07-02T13:20:56Z
dc.date.issued2018
dc.identifier.issn0040-2176
dc.identifier.urihttps://smile.stomf.bg.ac.rs/handle/123456789/2372
dc.description.abstractThe subject of this study is the quantitative adhesion of a UV-curing composite film based on Bis-GMA (Bisphenol A glycidylmethacrylate) / TEGDMA (triethylene glycol dimethacrylate) as a matrix and particles doped with ferrous oxide on a metal substrate. Two different metal substrates: silver and gold-spattered brass with nickel intermediate coating were used in adhesion evaluating. Adhesion was measured using micro-identation and it was compared with the measured wetting angle of composites to the substrate. It has been shown that the substrates, although with similar mechanical properties that are reflected in very close hardness values, differ by achieved adhesive bonding with the polymer UV-cured polymer film. The addition of ceramic particles in the polymer matrix increased the adhesion of the composite film to both substrates, but the adhesion trend was dependent on the substrate type.en
dc.description.abstractPredmet ovog istraživanja je kvantitativna procena adhezije između fotopolimerizujućeg kompozitnog filma na bazi Bis-GMA (Bisfenol A glicidilmetakrilata)/TEGDMA (trietilen glikol dimetakrilata) kao matrice i čestica na bazi aluminijum oksida dopiranih gvožđem na metalnoj podlozi. Korišćene su dve različite metalne podloge, jedna od srebra (u daljem tekstu 'srebro') i jedna pozlaćena mesingana pločica sa međuprevlakom od nikla (u daljem tekstu 'zlato'). Adhezija je merena korišćenjem mikroindentacije i upoređena je sa izmerenim uglom kvašenja kompozita na datim podlogama. Pokazalo se da se podloge, iako sličnih mehaničkih svojstava koje se ogledaju u veoma bliskim vrednostima tvrdoće, razlikuju po ostvarenoj adhezivnoj vezi sa polimernim fotopolimerizujućim filmom. Dodatak keramičkih čestica u polimernu matricu dodatno je povećao adheziju kompozitnog filma na obe podloge, dok je trend adhezije u zavisnosti od tipa podloge održan.sr
dc.publisherSavez inženjera i tehničara Srbije, Beograd
dc.relationinfo:eu-repo/grantAgreement/MESTD/Technological Development (TD or TR)/34011/RS//
dc.rightsopenAccess
dc.rights.urihttps://creativecommons.org/licenses/by/4.0/
dc.sourceTehnika
dc.subjectadhesionen
dc.subjectcompositeen
dc.subjectmicrostructureen
dc.subjectmicrohardnessen
dc.subjectwetting angleen
dc.subjectimage analysisen
dc.subjectadhezijasr
dc.subjectkompozitsr
dc.subjectmikrostrukturasr
dc.subjectmikrotvrdoćasr
dc.subjectugao kvašenjasr
dc.subjectanaliza slikesr
dc.titleExamination of the adhesion of polymer composite films based on Bis-GMA/TEGDMA on different metal substratesen
dc.titleIspitivanje adhezije polimernih kompozitnih filmova na bazi Bis-GMA/TEGDMA na različitim metalnim podlogamasr
dc.typearticle
dc.rights.licenseBY
dcterms.abstractВуксановић, Марија М.; Aлгеллаи, Aхмед A.; Томић, Наташа З.; Јанчић-Хеинеманн, Радмила М.; Димитријевић, Силвана Б.; Трифуновић, Дејан Д.; Обрадовић-Ђуричић, Косовка; Испитивање адхезије полимерних композитних филмова на бази Бис-ГМA/ТЕГДМA на различитим металним подлогама; Испитивање адхезије полимерних композитних филмова на бази Бис-ГМA/ТЕГДМA на различитим металним подлогама;
dc.citation.volume73
dc.citation.issue2
dc.citation.spage218
dc.citation.epage222
dc.citation.other73(2): 218-222
dc.citation.rankM51
dc.identifier.doi10.5937/tehnika1802218T
dc.identifier.fulltexthttps://smile.stomf.bg.ac.rs/bitstream/id/917/2367.pdf
dc.type.versionpublishedVersion


Документи

Thumbnail

Овај документ се појављује у следећим колекцијама

Приказ основних података о документу